Formation of silica-supported platinum nanoparticles as a function of preparation conditions and boron impregnation.

Preparation of supported metal nanoparticles for catalytic applications often relies on an assumption that the initially prepared wet-impregnated support material is covered with approximately a monolayer of adsorbed species that are shaped into the target nanoparticulate material with a desired size distribution by utilizing appropriate post-treatments that often include calcination and reduction schemes. Here, the formation and evolution of surface nanoparticles were investigated for wet-chemistry deposition of platinum from trimethyl(methylcyclopentadienyl)platinum (IV) precursor onto flat silica supports to interrogate the factors influencing the initial stages of nanoparticle formation. The deposition was performed on silicon-based substrates, including hydroxylated silica (SiO2) and boron-impregnated hydroxylated silica (B/SiO2) surfaces. The deposition resulted in the immediate formation of Pt-containing nanoparticles, as confirmed by atomic force microscopy and x-ray photoelectron spectroscopy. The prepared substrates were later reduced at 550 °C under H2 gas environment. This reduction procedure resulted in the formation of metallic Pt particles. The reactivity of the precursor and dispersion of Pt nanoparticles on the OH-terminated silica surface were compared to those on the B-impregnated surface. The size distribution of the resulting nanoparticles as a function of surface preparation was evaluated, and density functional theory calculations were used to explain the differences between the two types of surfaces investigated.

ZnO(101Ì 0) Surface Hydroxylation under Ambient Water Vapor.

The interaction of water vapor with a single crystal ZnO(101̅0) surface was investigated using synchrotron-based ambient pressure X-ray photoelectron spectroscopy (APXPS). Two isobaric experiments were performed at 0.3 and 0.07 Torr water vapor pressure at sample temperatures ranging from 750 to 295 K up to a maximum of 2% relative humidity (RH). Below 10-4 % RH the ZnO(101̅0) interface is covered with ∼0.25 monolayers of OH groups attributed to dissociation at nonstoichiometric defect sites. At ∼10-4 % RH there is a sharp onset in increased surface hydroxylation attributed to reaction at stoichiometric terrace sites. The surface saturates with an OH monolayer ∼0.26 nm thick and occurs in the absence of any observable molecularly bound water, suggesting the formation of a 1 × 1 dissociated monolayer structure. This is in stark contrast to ultrahigh vacuum experiments and molecular simulations that show the optimum structure is a 2 × 1 partially dissociated H2O/OH monolayer. The sharp onset to terrace site hydroxylation at ∼10-4 % RH for ZnO(101̅0) contrasts with APXPS observations for MgO(100) which show a sharp onset at 10-2 % RH. A surface thermodynamic analysis reveals that this shift to lower RH for ZnO(101̅0) compared to MgO(100) is due to a more favorable Gibbs free energy for terrace site hydroxylation.

Investigation of the influence of oxygen plasma on supported silver nanoparticles.

Silver deposition precursor molecule trimethylphosphine(hexafluoroacetylacetonato)silver(I) [(hfac)AgP(CH3)3] was used to deposit silver onto water-modified (hydroxyl-terminated) solid substrates. A silicon wafer was used as a model flat surface, and water-predosed ZnO nanopowder was investigated to expand the findings to a common substrate material for possible practical applications. Following the deposition, oxygen plasma was used to remove the remaining organic ligands on a surface and to investigate its effect on the morphology of chemically deposited silver nanoparticles and films. A combination of microscopic and spectroscopic techniques including electron microscopy and x-ray photoelectron spectroscopy was used to confirm the change in the morphology of the deposited material consistent with Ostwald ripening as a result of plasma treatment. Particle agglomeration was observed on the surfaces, and the deposited metallic silver was oxidized to Ag2O following plasma treatment. The fluorine-containing ligands were completely removed. This result suggests that chemical vapor deposition can be used to deposit silver in a very controlled manner onto a variety of substrates using different topography methods and that the post-treatment with oxygen plasma is effective in preparing materials deposited for potential practical applications.

Silver Deposition onto Modified Silicon Substrates.

Trimethylphosphine(hexafluoroacetylacetonato)silver(I) was used as a precursor to deposit silver onto silicon surfaces. The deposition was performed on silicon-based substrates including silica, H-terminated Si(100), and OH-terminated (oxidized) Si(100). The deposition processes at room temperature and elevated temperature (350 °C) were compared. The successful deposition resulted in nanostructures or nanostructured films as confirmed by atomic force microscopy (AFM) and scanning electron microscopy (SEM) with metallic silver being the majority deposited species as confirmed by X-ray photoelectron spectroscopy (XPS). The reactivity of the precursor depends drastically not only on the temperature of the process but also on the type of substrate. Density functional theory (DFT) was used to explain these differences and to propose the mechanisms for the initial deposition steps.

Using "Tender" X-ray Ambient Pressure X-Ray Photoelectron Spectroscopy as A Direct Probe of Solid-Liquid Interface.

We report a new method to probe the solid-liquid interface through the use of a thin liquid layer on a solid surface. An ambient pressure XPS (AP-XPS) endstation that is capable of detecting high kinetic energy photoelectrons (7 keV) at a pressure up to 110 Torr has been constructed and commissioned. Additionally, we have deployed a "dip &pull" method to create a stable nanometers-thick aqueous electrolyte on platinum working electrode surface. Combining the newly constructed AP-XPS system, "dip &pull" approach, with a "tender" X-ray synchrotron source (2 keV-7 keV), we are able to access the interface between liquid and solid dense phases with photoelectrons and directly probe important phenomena occurring at the narrow solid-liquid interface region in an electrochemical system. Using this approach, we have performed electrochemical oxidation of the Pt electrode at an oxygen evolution reaction (OER) potential. Under this potential, we observe the formation of both Pt(2+) and Pt(4+) interfacial species on the Pt working electrode in situ. We believe this thin-film approach and the use of "tender" AP-XPS highlighted in this study is an innovative new approach to probe this key solid-liquid interface region of electrochemistry.

A near ambient pressure XPS study of subnanometer silver clusters on Al2O3 and TiO2 ultrathin film supports.

We have investigated model systems of silver clusters with different sizes (3 and 15 atoms) deposited on alumina and titania supports using ambient pressure X-ray photoelectron spectroscopy. The electronic structures of silver clusters and support materials are studied upon exposure to various atmospheres (ultrahigh vacuum, O2 and CO) at different temperatures. Compared to bulk silver, the binding energies of silver clusters are about 0.55 eV higher on TiO2 and 0.95 eV higher on Al2O3 due to the final state effect and the interaction with supports. No clear size effect of the silver XPS peak is observed on different silver clusters among these samples. Silver clusters on titania show better stability against sintering. Al 2p and Ti 2p core level peak positions of the alumina and titania support surfaces change upon exposure to oxygen while the Ag 3d core level position remains unchanged. We discuss the origin of these core level shifts and their implications for catalytic properties of Ag clusters.

Direct work function measurement by gas phase photoelectron spectroscopy and its application on PbS nanoparticles.

Work function is a fundamental property of a material's surface. It is playing an ever more important role in engineering new energy materials and efficient energy devices, especially in the field of photovoltaic devices, catalysis, semiconductor heterojunctions, nanotechnology, and electrochemistry. Using ambient pressure X-ray photoelectron spectroscopy (APXPS), we have measured the binding energies of core level photoelectrons of Ar gas in the vicinity of several reference materials with known work functions (Au(111), Pt(111), graphite) and PbS nanoparticles. We demonstrate an unambiguously negative correlation between the work functions of reference samples and the binding energies of Ar 2p core level photoelectrons detected from the Ar gas near the sample surface region. Using this experimentally determined linear relationship between the surface work function and Ar gas core level photoelectron binding energy, we can measure the surface work function of different materials under different gas environments. To demonstrate the potential applications of this ambient pressure XPS technique in nanotechnology and solar energy research, we investigate the work functions of PbS nanoparticles with various capping ligands: methoxide, mercaptopropionic acid, and ethanedithiol. Significant Fermi level position changes are observed for PbS nanoparticles when the nanoparticle size and capping ligands are varied. The corresponding changes in the valence band maximum illustrate that an efficient quantum dot solar cell design has to take into account the electrochemical effect of the capping ligand as well.