Major effects on blood-retina barrier passage by minor alterations in design of polybutylcyanoacrylate nanoparticles.

Because the blood-brain barrier (BBB) is an obstacle for drug-delivery, carrier systems such as polybutylcyanoacrylate (PBCA) nanoparticles (NPs) have been studied. Yet, little is known of how physiochemical features such as size, surfactants and surface charge influence BBB passage in vivo. We now used a rat model of in vivo imaging of the retina - which is brain tissue and can reflect the situation at the BBB - to study how size and surface charge determine NPs' ability to cross the blood-retina barrier (BRB). Interestingly, for poloxamer 188-modified, DEAE-dextran-stabilised, fluorescent PBCA NPs, decreasing the average zeta-size from 272 nm to 172 nm by centrifugation reduced the BRB passage of the NPs substantially. Varying the zeta potential within the narrow range of 0-15 mV by adding different amounts of stabiliser revealed that 0 mV and 15 mV were less desirable than 5 mV which facilitated the BRB passage. Moreover, whether the fluorescent marker was adsorbed or incorporated also influenced the transport into the retina tissue. Thus, minor changes in design of nano-carriers can alter physicochemical parameters such as size or zeta potential, thus substantially influencing NPs' biological distribution in vivo, possibly by interactions with blood constituents and peripheral organs.

Improving the Strength of ZTA Foams with Different Strategies: Immersion Infiltration and Recoating.

The combination of high strength and toughness, excellent wear resistance and moderate density makes zirconia-toughened alumina (ZTA) a favorable ceramic, and the foam version of it may also exhibit excellent properties. Here, ZTA foams were prepared by the polymer sponge replication method. We developed an immersion infiltration approach with simple equipment and operations to fill the hollow struts in as-prepared ZTA foams, and also adopted a multiple recoating method (up to four cycles) to strengthen them. The solid load of the slurry imposed a significant influence on the properties of the ZTA foams. Immersion infiltration gave ZTA foams an improvement of 1.5 MPa in compressive strength to 2.6 MPa at 87% porosity, only resulting in a moderate reduction of porosity (2-3%). The Weibull modulus of the infiltrated foams was in the range of 6-9. The recoating method generated an increase in compression strength to 3.3-11.4 MPa with the reduced porosity of 58-83%. The recoating cycle dependency of porosity and compression strength is nearly linear. The immersion infiltration strategy is comparable to the industrially-established recoating method and can be applied to other reticulated porous ceramics (RPCs).