Electrical and Low Frequency Noise Characterization of Graphene Chemical Sensor Devices Having Different Geometries.

Chemiresistive graphene sensors are promising for chemical sensing applications due to their simple device structure, high sensitivity, potential for miniaturization, low-cost, and fast response. In this work, we investigate the effect of (1) ZnO nanoparticle functionalization and (2) engineered defects onto graphene sensing channel on device resistance and low frequency electrical noise. The engineered defects of interest include 2D patterns of squares, stars, and circles and 1D patterns of slots parallel and transverse to the applied electric potential. The goal of this work is to determine which devices are best suited for chemical sensing applications. We find that, relative to pristine graphene devices, nanoparticle functionalization leads to reduced contact resistance but increased sheet resistance. In addition, functionalization lowers 1/f current noise on all but the uniform mesa device and the two devices with graphene strips parallel to carrier transport. The strongest correlations between noise and engineering defects, where normalized noise amplitude as a function of frequency f is described by a model of AN/fγ, are that γ increases with graphene area and contact area but decreases with device total perimeter, including internal features. We did not find evidence of a correlation between the scalar amplitude, AN, and the device channel geometries. In general, for a given device area, the least noise was observed on the least-etched device. These results will lead to an understanding of what features are needed to obtain the optimal device resistance and how to reduce the 1/f noise which will lead to improved sensor performance.

Back-Gate GaN Nanowire-Based FET Device for Enhancing Gas Selectivity at Room Temperature.

In this work, a TiO2-coated GaN nanowire-based back-gate field-effect transistor (FET) device was designed and implemented to address the well-known cross-sensitive nature of metal oxides. Even though a two-terminal TiO2/GaN chemiresistor is highly sensitive to NO2, it suffers from lack of selectivity toward NO2 and SO2. Here, a Si back gate with C-AlGaN as the gate dielectric was demonstrated as a tunable parameter, which enhances discrimination of these cross-sensitive gases at room temperature (20 °C). Compared to no bias, a back-gate bias resulted in a significant 60% increase in NO2 response, whereas the increase was an insignificant 10% in SO2 response. The differential change in gas response was explained with the help of a band diagram, derived from the energetics of molecular models based on density functional theory (DFT). The device geometries in this work are not optimized and are intended only for proving the concept.

Gallium Nitride (GaN) Nanostructures and Their Gas Sensing Properties: A Review.

In the last two decades, GaN nanostructures of various forms like nanowires (NWs), nanotubes (NTs), nanofibers (NFs), nanoparticles (NPs) and nanonetworks (NNs) have been reported for gas sensing applications. In this paper, we have reviewed our group's work and the works published by other groups on the advances in GaN nanostructures-based sensors for detection of gases such as hydrogen (H2), alcohols (R-OH), methane (CH4), benzene and its derivatives, nitric oxide (NO), nitrogen dioxide (NO2), sulfur-dioxide (SO2), ammonia (NH3), hydrogen sulfide (H2S) and carbon dioxide (CO2). The important sensing performance parameters like limit of detection, response/recovery time and operating temperature for different type of sensors have been summarized and tabulated to provide a thorough performance comparison. A novel metric, the product of response time and limit of detection, has been established, to quantify and compare the overall sensing performance of GaN nanostructure-based devices reported so far. According to this metric, it was found that the InGaN/GaN NW-based sensor exhibits superior overall sensing performance for H2 gas sensing, whereas the GaN/(TiO2-Pt) nanowire-nanoclusters (NWNCs)-based sensor is better for ethanol sensing. The GaN/TiO2 NWNC-based sensor is also well suited for TNT sensing. This paper has also reviewed density-functional theory (DFT)-based first principle studies on the interaction between gas molecules and GaN. The implementation of machine learning algorithms on GaN nanostructured sensors and sensor array has been analyzed as well. Finally, gas sensing mechanism on GaN nanostructure-based sensors at room temperature has been discussed.

Reliable anatase-titania nanoclusters functionalized GaN sensor devices for UV assisted NO2 gas-sensing in ppb level.

Internet of Things applications require ultra-low power, integrable into electronic circuits and mini-sized chemical sensors for automated remote air quality monitoring system. In this work, a highly sensitive and selective detection of nitrogen dioxide (NO2) has been demonstrated by functionalizing gallium nitride (GaN) submicron wire with titania (TiO2) nanoclusters. The two-terminal GaN/TiO2 sensor device was fabricated by top-down approach. The photo-enabled sensing makes it possible to operate this sensor at room-temperature, resulting in a significant reduction in operating power. The GaN/TiO2 sensor was able to detect NO2 concentrations as low as 10 ppb in air at room temperature (20 °C) with a quick response-recovery process. The sensor was found highly selective toward NO2 against other interfering gases, such as ethanol (C2H5OH), ammonia (NH3), sulfur dioxide (SO2), methane (CH4) and carbon dioxide (CO2). Furthermore, principal component analysis has been performed to address the cross-sensitive nature of TiO2. The sensor device exhibited excellent long-term stability at room temperature and humidity and was quite stable and reliable at various environmental conditions. Continuous exposure of the device to siloxane for a one-month period has shown a very small degradation in sensor response to NO2. Finally, interaction of NO2 gas molecules with the GaN/TiO2 sensor has been modeled and explained under the light of energy band diagram. The photoinduced oxygen desorption and subsequent charge transfer between TiO2 nanoclusters and NO2 molecules modulate the depletion region width within the GaN, thus contributing to a high performance NO2 gas sensing.

Recent Advances in Electrochemical Sensors for Detecting Toxic Gases: NO2, SO2 and H2S.

Toxic gases, such as NOx, SOx, H2S and other S-containing gases, cause numerous harmful effects on human health even at very low gas concentrations. Reliable detection of various gases in low concentration is mandatory in the fields such as industrial plants, environmental monitoring, air quality assurance, automotive technologies and so on. In this paper, the recent advances in electrochemical sensors for toxic gas detections were reviewed and summarized with a focus on NO2, SO2 and H2S gas sensors. The recent progress of the detection of each of these toxic gases was categorized by the highly explored sensing materials over the past few decades. The important sensing performance parameters like sensitivity/response, response and recovery times at certain gas concentration and operating temperature for different sensor materials and structures have been summarized and tabulated to provide a thorough performance comparison. A novel metric, sensitivity per ppm/response time ratio has been calculated for each sensor in order to compare the overall sensing performance on the same reference. It is found that hybrid materials-based sensors exhibit the highest average ratio for NO2 gas sensing, whereas GaN and metal-oxide based sensors possess the highest ratio for SO2 and H2S gas sensing, respectively. Recently, significant research efforts have been made exploring new sensor materials, such as graphene and its derivatives, transition metal dichalcogenides (TMDs), GaN, metal-metal oxide nanostructures, solid electrolytes and organic materials to detect the above-mentioned toxic gases. In addition, the contemporary progress in SO2 gas sensors based on zeolite and paper and H2S gas sensors based on colorimetric and metal-organic framework (MOF) structures have also been reviewed. Finally, this work reviewed the recent first principle studies on the interaction between gas molecules and novel promising materials like arsenene, borophene, blue phosphorene, GeSe monolayer and germanene. The goal is to understand the surface interaction mechanism.

An Antimony Selenide Molecular Ink for Flexible Broadband Photodetectors.

The need for low-cost high-performance broadband photon detection with sensitivity in the near infrared (NIR) has driven interest in new materials that combine high absorption with traditional electronic infrastructure (CMOS) compatibility. Here, we demonstrate a facile, low-cost and scalable, catalyst-free one-step solution-processed approach to grow one-dimensional Sb2Se3 nanostructures directly on flexible substrates for high-performance NIR photodetectors. Structural characterization and compositional analyses reveal high-quality single-crystalline material with orthorhombic crystal structure and a near-stoichiometric Sb/Se atomic ratio. We measure a direct band gap of 1.12 eV, which is consistent with predictions from theoretical simulations, indicating strong NIR potential. The fabricated metal-semiconductor-metal photodetectors exhibit fast response (on the order of milliseconds) and high performance (responsivity ~ 0.27 A/W) as well as excellent mechanical flexibility and durability. The results demonstrate the potential of molecular-ink-based Sb2Se3 nanostructures for flexible electronic and broadband optoelectronic device applications.

Prevalence of periodontal diseases among rural population of Mustabad, Krishna District.

AIMS AND OBJECTIVES: People in rural areas neglect oral health as they lack awareness on dental diseases and also due to inadequate availability of dental services. The prevalence of illiteracy is also a reason which can be attributed to a poor oral health. This epidemiological study is undertaken to assess the prevalence of periodontal diseases in the rural population of Mustabad - in Krishna, Andhra Pradesh. MATERIALS AND METHODS: A cross-sectional study based on randomized sampling method was carried out using the WHO assessment form (1997) on a population of 470. The data were subjected to statistical analysis using Statistical Package for Social Sciences Version 15.0. RESULTS: The subjects were 220 males and 250 females. Maximum numbers of subjects were in the age group of 35-44 years (21.91%). Prevalence of periodontal disease was found to be 73.62%. The periodontal status deteriorated with aging. Prevalence of periodontitis was higher in females (56.35%) compared to males (43.65%). Males had a higher prevalence of deep pockets (3.18%), whereas females had a higher prevalence of shallow pockets (3.20%). Females had twice the bleeding tendency (18.80%) compared to males (8.64%). CONCLUSION: The increasing prevalence of periodontal diseases is an impending problem which needs immediate intervention, if not it would have a serious negative impact on the future oral health. The need of the hour is more epidemiological studies with a bigger sample are required.

Self-powered p-NiO/n-ZnO heterojunction ultraviolet photodetectors fabricated on plastic substrates.

A self-powered ultraviolet (UV) photodetector (PD) based on p-NiO and n-ZnO was fabricated using low-temperature sputtering technique on indium doped tin oxide (ITO) coated plastic polyethylene terephthalate (PET) substrates. The p-n heterojunction showed very fast temporal photoresponse with excellent quantum efficiency of over 63% under UV illumination at an applied reverse bias of 1.2 V. The engineered ultrathin Ti/Au top metal contacts and UV transparent PET/ITO substrates allowed the PDs to be illuminated through either front or back side. Morphology, structural, chemical and optical properties of sputtered NiO and ZnO films were also investigated.

Highly selective GaN-nanowire/TiO2-nanocluster hybrid sensors for detection of benzene and related environment pollutants.

Nanowire-nanocluster hybrid chemical sensors were realized by functionalizing gallium nitride (GaN) nanowires (NWs) with titanium dioxide (TiO(2)) nanoclusters for selectively sensing benzene and other related aromatic compounds. Hybrid sensor devices were developed by fabricating two-terminal devices using individual GaN NWs followed by the deposition of TiO(2) nanoclusters using RF magnetron sputtering. The sensor fabrication process employed standard microfabrication techniques. X-ray diffraction and high-resolution analytical transmission electron microscopy using energy-dispersive x-ray and electron energy-loss spectroscopies confirmed the presence of the anatase phase in TiO(2) clusters after post-deposition anneal at 700 °C. A change of current was observed for these hybrid sensors when exposed to the vapors of aromatic compounds (benzene, toluene, ethylbenzene, xylene and chlorobenzene mixed with air) under UV excitation, while they had no response to non-aromatic organic compounds such as methanol, ethanol, isopropanol, chloroform, acetone and 1,3-hexadiene. The sensitivity range for the noted aromatic compounds except chlorobenzene were from 1% down to 50 parts per billion (ppb) at room temperature. By combining the enhanced catalytic properties of the TiO(2) nanoclusters with the sensitive transduction capability of the nanowires, an ultra-sensitive and selective chemical sensing architecture is demonstrated. We have proposed a mechanism that could qualitatively explain the observed sensing behavior.

Correlation between the performance and microstructure of Ti/Al/Ti/Au Ohmic contacts to p-type silicon nanowires.

Understanding the electrical and microstructural aspects of contact formation at nanoscale is essential for the realization of low-resistance metallization suitable for the next generation of nanowire based devices. In this study, we present detailed electrical and microstructural characteristics of Ti/Al/Ti/Au metal contacts to p-type Si nanowires (SiNWs) annealed at various temperatures. Focused ion beam cross-sectioning techniques and scanning transmission electron microscopy (STEM) were used to determine the microstructure of the source/drain metal contacts of working SiNW field-effect transistors (FETs) annealed for 30 s in the 450-850 °C temperature range in inert atmosphere. Formation of titanium silicides is observed at the metal/semiconductor interface after the 750 °C anneal. Extensive Si out-diffusion from the nanowire after the 750 °C anneal led to Kirkendall void formation. Annealing at 850 °C led to almost complete out-diffusion of Si from the nanowire core. Devices with 550 °C annealed contacts had linear electrical characteristics; whereas the devices annealed at 750 °C had the best characteristics in terms of linearity, symmetric behavior, and yield. Devices annealed at 850 °C had poor yield, which can be directly attributed to the microstructure of the contact region observed in STEM.

Dielectrophoretic capture of mammalian cells using transparent indium tin oxide electrodes in microfluidic systems.

Transparent indium tin oxide microelectrodes were fabricated and used to immobilize suspended NIH 3T3 fibroblast cells by positive dielectrophoresis. The indium tin oxide electrodes facilitated microscopic observation of immobilized cells compared with opaque metallized electrodes. Dielectrophoresis was used to capture arrays of individual cells and form small cell clusters within a microfluidic network. The extent of cellular immobilization (no-cell, single-cell, or multiple-cell capture) was correlated with the applied voltage and inversely with the flow velocity. Specific conditions yielding predominantly single-cell capture were identified. The viability of immobilized cells was confirmed using fluorescence microscopy.

Microwave Power Absorption in Low-Reflectance, Complex, Lossy Transmission Lines.

Simple sets of equations have been derived to describe the absorption of microwave power in three-region, lossy transmission lines in terms of S-parameter reflection and transmission amplitudes. Each region was assumed to be homogeneous with discontinuities at the region boundaries. Different sets of equations were derived to describe different assumptions about the amplitudes of the reflection coefficients at the different boundaries. These equations, which are useful when interference effects due to multiple reflections are small, were used to analyze S-parameter measurements on a transmission line that had a microfluidic channel in its middle region. The channel was empty for one set of measurements and filled with water for a second set of measurements. Most of the reflection assumptions considered here produced similar results for the fraction of the applied microwave power that was absorbed by a water-filled microchannel. This shows that the absorbed power is relatively insensitive to the reflection details as long as energy is conserved in the analysis. Another important result of this work is that the difference between the power absorbed in a water-filled channel and the power absorbed in the same empty channel can be a poor predictor of the power absorbed in the water in the presence of competing absorption processes such as absorption by the transmission-line metal.

Surface modification of poly(methyl methacrylate) for improved adsorption of wall coating polymers for microchip electrophoresis.

The development of rapid and simple wall coating strategies for high-efficiency electrophoretic separation of DNA is of crucial importance for the successful implementation of miniaturized polymeric DNA analysis systems. In this report, we characterize and compare different methods for the chemical modification of poly(methyl methacrylate) (PMMA) surfaces for the application of wall coating polymers. PMMA surfaces coated with 40 mol% diethylacrylamide and 60 mol% dimethylacrylamide are compared to the PMMA surfaces first oxidized and then coated with hydroxypropylmethyl-cellulose or poly(vinyl alcohol) (PVA). PMMA oxidation was accomplished with UV/ozone or an aqueous solution of HNO(3) to yield hydrogen-bond donors for the spontaneous adsorption of the coating polymers. Contact angle measurements of UV/ozone exposed PMMA surfaces indicate increase in hydrophilicity, and polymer coated surfaces show a strong dependence on the coating polymer and the oxidation method. Fast and repeatable electrophoretic separations of a 10-base and 20-base DNA ladder were performed in PMMA micro CE devices. All analyses were completed in less than 10 min, resulting in the number of theoretical plates as high as 583 000 in a 7.7 cm long separation channel. The duration of UV/ozone treatment was found to have a considerable impact on separation performance. The microchips irradiated with UV for 10 min and coated with PVA as well as the microchips treated with HNO(3) and coated with HPMC were found to have the best separation performance. These results demonstrate facile and robust methods for the surface modification of PMMA enabling low-cost single use devices for electrophoretic DNA separations.

Capillarity induced solvent-actuated bonding of polymeric microfluidic devices.

Rapid, robust, and economical fabrication of fluidic microchannels is of fundamental importance for the successful development of disposable lab-on-a-chip devices. In this work, we present a solvent-actuated bonding method for fabricating polymeric microfluidic devices at room temperature. A PMMA sheet with an imprinted microchannel was clamped to a blank PMMA sheet, and then 80 +/- 5 muL of acetone (bonding solvent) was introduced at one end of the fluidic channel and aspirated out at the other end. As the solvent moved down the channel, capillary forces drew a fraction of the solvent into the interstitial space between the two polymeric substrates. After aspiration, the assembly was incubated in the clamp for 5 min for effective bond formation. The quantity of the bonding solvent, its water content and flow rate, along with residence time in the channel were found to have significant impact on the bond quality and the channel integrity. Microfluidic electrophoretic separations of a 400-base DNA ladder were performed in devices fabricated using this method in less than 8 min with efficiencies routinely between 2 x 10(6) and 3 x 10(6) plates/m. The simplicity and economy of this technique make it amenable for automation and mass production, which could make polymeric substrates more attractive for single-use chemical analysis devices.

The auxin-induced transcriptome for etiolated Arabidopsis seedlings using a structure/function approach.

To increase our understanding of the mode of action of auxin, we analyzed auxin-induced changes in the Arabidopsis transcriptome with microarrays representing 20426 Arabidopsis genes. Treatment of etiolated seedlings with low concentrations of the auxin, indole-3-acetic acid (IAA), decreased the expression levels of 23 genes, whereas it increased the expression levels of 47 genes within 20 min. After 40 min, the directional trend in genomic change was predominantly an increase in gene expression. Among the most rapidly induced changes are those in genes encoding transcription factors. Promoter regions of transiently induced genes contained DNA motifs that bind auxin response (ARFAT) and silence element binding factors whereas genes induced by IAA during the entire experimental period contained MYC and ARFAT DNA motifs at higher frequencies. Six structurally diverse auxins were analyzed to determine genes that are unique to a specific auxin, as well as a common set of genes that are rapidly regulated by all tested auxins, thus enabling the identification of shared DNA motifs. In addition to ARFAT, analysis of promoter regions of genes induced by all six auxins revealed the presence of an abscisic-acid-responsive DC3 promoter-binding factor and low temperature responsive elements suggesting a possible role for abscisic acid in modulating auxin-induced responses.

Ozone-induced ethylene production is dependent on salicylic acid, and both salicylic acid and ethylene act in concert to regulate ozone-induced cell death.

Ethylene is known to influence plant defense responses including cell death in response to both biotic and abiotic stress factors. However, whether ethylene acts alone or in conjunction with other signaling pathways is not clearly understood. Ethylene overproducer mutants, eto1 and eto3, produced high levels of ethylene and developed necrotic lesions in response to an acute O3 exposure that does not induce lesions in O3-tolerant wild-type Col-0 plants. Treatment of plants with ethylene inhibitors completely blocked O3-induced ethylene production and partially attenuated O3-induced cell death. Analyses of the responses of molecular markers of specific signaling pathways indicated a relationship between salicylic acid (SA)- and ethylene-signaling pathways and O3 sensitivity. Both eto1 and eto3 plants constitutively accumulated threefold higher levels of total SA and exhibited a rapid increase in free SA and ethylene levels prior to lesion formation in response to O3 exposure. SA pre-treatments increased O3 sensitivity of Col-0, suggesting that constitutive high SA levels prime leaf tissue to exhibit increased magnitude of O3-induced cell death. NahG and npr1 plants compromised in SA signaling failed to produce ethylene in response to O3 and other stress factors suggesting that SA is required for stress-induced ethylene production. Furthermore, NahG expression in the dominant eto3 mutant attenuated ethylene-dependent PR4 expression and rescued the O3-induced HR (hypersensitive response) cell death phenotype exhibited by eto3 plants. Our results suggest that both SA and ethylene act in concert to influence cell death in O3-sensitive genotypes, and that O3-induced ethylene production is dependent on SA.