Large Optical Nonlinearity of the Activated Carbon Nanoparticles Prepared by Laser Ablation.

Carbon nanoparticles (CNPs) with high porosity and great optical features can be used as a luminescent material. One year later, the same group investigated the NLO properties CNPs and boron-doped CNPs by 532 nm and 1064 nm laser excitations to uncover the underlying physical mechanisms in their NLO response. Hence, a facile approach, laser ablation technique, was employed for carbon nanoparticles (CNPs) synthesis from suspended activated carbon (AC). Morphological properties of the prepared CNPs were studied by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). UV-Vis and fluorescence (FL) spectra were used to optical properties investigation of CNPs. The size distribution of nanoparticles was evaluated using dynamic light scattering (DLS). The nonlinear optical (NLO) coefficients of the synthesized CNPs were determined by the Z-scan method. As a result, strong reverse saturable absorption and self-defocusing effects were observed at the excitation wavelength of 442 nm laser irradiation. These effects were ascribed to the presence of delocalized π-electrons in AC CNPs. To the best of our knowledge, this is the first study investigating the NLO properties of the AC CNPs.

High-contrast optical microscopy of graphene sheets.

In the way of making graphene an industry-friendly material, it must be mass-produced with high-quality and reduced cost over large areas. Assisted by machine-learning techniques, rapid, nondestructive and accurate determination of large graphene sheets on SiO2 /Si substrates has been made possible in recent years by the optical microscopy method. Optimization of the substrate to achieve the maximum contrast can further extend the application of the optical microscopy method for quality control of the mass-produced graphene. Graphene/n2 /n3 three-layer structures, where n2 and n3 are refractive indices, are routinely used for identifying the number of graphene layers by optical reflection microscopy. In this paper, two analytical equations are derived that can be easily used for high-contrast optical imaging of graphene sheets without any need to resort to the cumbersome numerical methods. One of the equations is derived for choosing the best material with refractive index n2 that when coated on a substrate with refractive index n3 , maximizes the optical contrast. The other equation is derived for finding the best thickness of the SiO2 layer in graphene/SiO2 /Si structures, which are in common use for fabrication of graphene-based devices. The results are implemented in a MATLAB GUI, see Supporting Information, to assist the users in using the equations.

A New Optical Method for Online Monitoring of the Light Dose and Dose Profile in Photodynamic Therapy.

BACKGROUND AND OBJECTIVES: Photodynamic therapy (PDT) has gained widespread popularity in the last decades because of its distinctive advantages over the other commonly used cancer treatments. PDT dosimetry is a crucial factor in achieving a good optimization of PDT treatment planning. PDT dosimetry is a complex task since light dose as well as photosensitizer and oxygen concentrations in tissue need to be measured (ideally continuously) to be able to fully characterize the biological response. Light dose in PDT is routinely measured by the optical fibers that provide dose data at a limited number of discrete points and are not able to capture spatial dose profiles. The objective of this study is to propose and develop a new optical method for online monitoring of the dose profile data for PDT. STUDY DESIGN/MATERIALS AND METHODS: Using the digital holography technique, first, the general sketch of an experimental setup for PDT light dosimetry is provided. The theory behind the proposed method for using the experimental setup in PDT light dosimetry is fully described, and its limits of validity are determined. In a proof of principle study, the ability of the method for online monitoring of the absorbed light dose profile in PDT is evaluated by a simple experimental setup. RESULTS: The experimental results confirm the usefulness of the proposed method in providing continuous online dose profiles. The absorbed light dose profiles from an infrared light source in a quartz cell containing water are measured and shown. The depth-dose curves are extracted and it is shown that how these dosimetric data can be used for assisting the physicians in determining the appropriate spatiotemporal characteristics for treating the infected tissues and solid tumors with the required light dose amounts. A conversion relation is also derived for transforming the measured light dose with the proposed method to the most frequently used dose values by PDT practitioners, in terms of light power per square area. CONCLUSIONS: There is no restriction in using the method with other commonly used light sources in PDT, like light-emitting diodes and filtered lamps, with different wavelengths in visible or infrared regions of the spectrum. More complex experimental setups can be used in future studies to study the role of accumulated photosensitizers in malignant tissues. The proposed method in this study can also be used for light dose monitoring in other biomedical applications, where light is used for treating special diseases, and patients must receive sufficient amounts of light dose. Lasers Surg. Med. © 2019 Wiley Periodicals, Inc.

Development of a novel mixed hemimicelles dispersive micro solid phase extraction using 1-hexadecyl-3-methylimidazolium bromide coated magnetic graphene for the separation and preconcentration of fluoxetine in different matrices before its determination by fiber optic linear array spectrophotometry and mode-mismatched thermal lens spectroscopy.

This study aims at developing a novel, sensitive, fast, simple and convenient method for separation and preconcentration of trace amounts of fluoxetine before its spectrophotometric determination. The method is based on combination of magnetic mixed hemimicelles solid phase extraction and dispersive micro solid phase extraction using 1-hexadecyl-3-methylimidazolium bromide coated magnetic graphene as a sorbent. The magnetic graphene was synthesized by a simple coprecipitation method and characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). The retained analyte was eluted using a 100 µL mixture of methanol/acetic acid (9:1) and converted into fluoxetine-ß-cyclodextrin inclusion complex. The analyte was then quantified by fiber optic linear array spectrophotometry as well as mode-mismatched thermal lens spectroscopy (TLS). The factors affecting the separation, preconcentration and determination of fluoxetine were investigated and optimized. With a 50 mL sample and under optimized conditions using the spectrophotometry technique, the method exhibited a linear dynamic range of 0.4-60.0 µg L(-1), a detection limit of 0.21 µg L(-1), an enrichment factor of 167, and a relative standard deviation of 2.1% and 3.8% (n = 6) at 60 µg L(-1) level of fluoxetine for intra- and inter-day analyses, respectively. However, with thermal lens spectrometry and a sample volume of 10 mL, the method exhibited a linear dynamic range of 0.05-300 µg L(-1), a detection limit of 0.016 µg L(-1) and a relative standard deviation of 3.8% and 5.6% (n = 6) at 60 µg L(-1) level of fluoxetine for intra- and inter-day analyses, respectively. The method was successfully applied to determine fluoxetine in pharmaceutical formulation, human urine and environmental water samples.

Iron oxide functionalized graphene oxide as an efficient sorbent for dispersive micro-solid phase extraction of sulfadiazine followed by spectrophotometric and mode-mismatched thermal lens spectrometric determination.

A simple and rapid dispersive micro-solid phase extraction (DMSPE) combined with mode-mismatched thermal lens spectrometry as well as fiber optic linear array spectrophotometry was developed for the separation, extraction and determination of sulfadiazine. Graphene oxide was synthesized using the modified Hummers method and functionalized with iron oxide nanoparticles by means of a simple one step chemical coprecipitation method. The synthesized iron oxide functionalized graphene oxide was utilized as an efficient sorbent in DMSPE of sulfadiazine. The retained analyte was eluted by using 180µL of a 6:4 mixture of methanol/acetic acid solution and was spectrophotometrically determined based on the formation of an azo dye through coupling with thenoyltrifluoroacetone. Under the optimized conditions, with the application of spectrophotometry technique and with a sample volume of 100mL, the method exhibited a linear dynamic range of 3-80µg L(-1) with a detection limit of 0.82µg L(-1), an enrichment factor of 200 as well as the relative standard deviations of 2.6% and 4.3% (n=6) at 150µg L(-1) level of sulfadiazine for intra- and inter-day analyses, respectively. Whereas, through the application of the thermal lens spectrometry and a sample volume of 10mL, the method exhibited a linear dynamic range of 1-800µg L(-1) with a detection limit of 0.34µg L(-1) and the relative standard deviations of 3.1% and 5.4% (n=6) at 150µg L(-1) level of sulfadiazine for intra- and inter-day analyses, respectively. The method was successfully applied to the determination of sulfadiazine in milk, honey and water samples.

Z-scan theory for nonlocal nonlinear media with simultaneous nonlinear refraction and nonlinear absorption.

In this paper, the Z-scan theory for nonlocal nonlinear media has been further developed when nonlinear absorption and nonlinear refraction appear simultaneously. To this end, the nonlinear photoinduced phase shift between the impinging and outgoing Gaussian beams from a nonlocal nonlinear sample has been generalized. It is shown that this kind of phase shift will reduce correctly to its known counterpart for the case of pure refractive nonlinearity. Using this generalized form of phase shift, the basic formulas for closed- and open-aperture beam transmittances in the far field have been provided, and a simple procedure for interpreting the Z-scan results has been proposed. In this procedure, by separately performing open- and closed-aperture Z-scan experiments and using the represented relations for the far-field transmittances, one can measure the nonlinear absorption coefficient and nonlinear index of refraction as well as the order of nonlocality. Theoretically, it is shown that when the absorptive nonlinearity is present in addition to the refractive nonlinearity, the sample nonlocal response can noticeably suppress the peak and enhance the valley of the Z-scan closed-aperture transmittance curves, which is due to the nonlocal action's ability to change the beam transverse dimensions.