N-Containing Carbon-Coated ß-Si3 N4 Enhances Si Anodes for High-Performance Li-Ion Batteries.

The lithiation/delithiation properties of α-Si3 N4 and ß-Si3 N4 are compared and the carbon coating effects are examined. Then, ß-Si3 N4 at various fractions is used as the secondary phase in a Si anode to modify the electrode properties. The incorporated ß-Si3 N4 decreases the crystal size of Si and introduces a new NSiO species at the ß-Si3 N4 /Si interface. The nitrogen from the milled ß-Si3 N4 diffuses into the surface carbon coating during the carbonization heat treatment, forming pyrrolic nitrogen and CNO species. The synergistic effects of combining ß-Si3 N4 and Si phases on the specific capacity are confirmed. The operando X-ray diffraction and X-ray photoelectron spectroscopy data indicate that ß-Si3 N4 is partially consumed during lithiation to form a favorable Li3 N species at the electrode. However, the crystalline structure of the hexagonal ß-Si3 N4 is preserved after prolonged cycling, which prevents electrode agglomeration and performance deterioration. The carbon-coated ß-Si3 N4 /Si composite anode shows specific capacities of 1068 and 480 mAh g-1 at 0.2 and 5 A g-1 , respectively. A full cell consisting of the carbon-coated ß-Si3 N4 /Si anode and a LiNi0.8 Co0.1 Mn0.1 O2 cathode is constructed and its properties are evaluated. The potential of the proposed composite anodes for Li-ion battery applications is demonstrated.

Suppression of Dehydrofluorination Reactions of a Li0.33La0.557TiO3-Nanofiber-Dispersed Poly(vinylidene fluoride-co-hexafluoropropylene) Electrolyte for Quasi-Solid-State Lithium-Metal Batteries by a Fluorine-Rich Succinonitrile Interlayer.

Solid-state lithium-metal batteries have great potential to simultaneously achieve high safety and high energy density for energy storage. However, the low ionic conductivity of the solid electrolyte and large electrode/electrolyte interfacial impedance are bottlenecks. A composite solid electrolyte (CSE) that integrates electrospun Li0.33La0.557TiO3 (LLTO) nanofibers, poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) is fabricated in this work. The effects of the LLTO filler fraction and morphology (spherical vs fibrous) on CSE conductivity are examined. Additionally, a fluorine-rich interlayer based on succinonitrile, fluoroethylene carbonate, and LiTFSI, denoted as succinonitrile interlayer (SNI), is developed to reduce the large interfacial impedance. The use of SNI rather than a conventional ester-based interlayer (EBI) effectively decreases the Li//CSE interfacial resistance and suppresses unfavorable interfacial side reactions. The LiF- and CFx-rich solid electrolyte interphase (SEI), derived from SNI, on the Li metal electrode, mitigates the accumulation of dead Li and excessive SEI. Importantly, dehydrofluorination reactions of PVDF-HFP are significantly reduced by the introduction of SNI. A symmetric Li//CSE//Li cell with SNI exhibits a much longer cycle life than that of an EBI counterpart. A Li//CSE@SNI//LiFePO4 cell shows specific capacities of 150 and 112 mAh g-1 at 0.1 and 2 C (based on LiFePO4), respectively. After 100 charge-discharge cycles, 98% of the initial capacity is retained.

Composition Modulation of Ionic Liquid Hybrid Electrolyte for 5 V Lithium-Ion Batteries.

Electrolyte is a key component in high-voltage lithium-ion batteries (LIBs). Bis(trifluoromethanesulfonyl)imide-based ionic liquid (IL)/organic carbonate hybrid electrolytes have been a research focus owing to their excellent balance of safety and ionic conductivity. Nevertheless, corrosion of Al current collectors at high potentials usually happens for this kind of electrolyte. In this study, this long-standing problem is solved via the modulation of the IL/carbonate ratio and LiPF6 concentration in the hybrid electrolyte. The proposed electrolyte suppresses Al dissolution and electrolyte oxidation at 5 V (vs Li+/Li) and thus allows for ideal lithiation/delithiation performance of a high-voltage LiNi0.5Mn1.5O4 (LNMO) cathode even at 55 °C. The underlying mechanism is examined in this work. Excellent cycling stability (97% capacity retention) for an LNMO cathode after 300 cycles is achieved. This electrolyte shows good wettability toward a polyethylene separator and low flammability. In addition, satisfactory compatibility with both graphite and Si-based anodes is confirmed. The proposed electrolyte design strategies have great potential for applications in high-voltage LIBs.

Carbonaceous Anodes Derived from Sugarcane Bagasse for Sodium-Ion Batteries.

To realize the sustainability of Na-ion batteries (NIBs) for large-scale energy storage applications, a resource-abundant and cost-effective anode material is required. In this study, sugarcane bagasse (SB), one of the most abundant types of biowaste, is chosen as the carbon precursor to produce a hard carbon (HC) anode for NIBs. SB has a great balance of cellulose, hemicellulose, and lignin, which prevents full graphitization of the pyrolyzed carbon but ensures a sufficiently ordered carbon structure for Na+ transport. Compared with HC derived from waste apples, which are pectin-rich and have less cellulose than SB, SB-derived HC (SB-HC) has fewer defects and a lower oxygen content. SB-HC thus has a higher first-cycle sodiation/desodiation coulombic efficiency and better cycling stability. In addition, SB-HC has a unique flake-like morphology, which can shorten the Na+ diffusion length, and higher electronic conductivity (owing to more sp2 -hybridized carbon), resulting in superior high-rate charge-discharge performance to apple-derived HC. The effects of pyrolysis temperature on the material characteristics and electrochemical properties, evaluated by using chronopotentiometry, cyclic voltammetry, and electrochemical impedance spectroscopy, are systematically investigated for both kinds of HC.

A Water-Soluble NaCMC/NaPAA Binder for Exceptional Improvement of Sodium-Ion Batteries with an SnO2 -Ordered Mesoporous Carbon Anode.

SnO2 @CMK-8 composite, a highly promising anode for Na-ion batteries (NIBs), was incorporated with polyvinylidene difluoride (PVDF), sodium carboxymethylcellulose (NaCMC), sodium polyacrylate (NaPAA), and NaCMC/NaPAA mixed binders to optimize the electrode sodiation/desodiation properties. Synergistic effects between NaCMC and NaPAA led to the formation of an effective protective film on the electrode. This coating layer not only increased the charge-discharge Coulombic efficiency, suppressing the accumulation of solid-electrolyte interphases, but also kept the SnO2 nanoparticles in the CMK-8 matrix, preventing the agglomeration and removal of oxide upon cycling. The adhesion strength and stability towards the electrolyte of the binders were evaluated. In addition, the charge-transfer resistance and apparent Na+ diffusion of the SnO2 @CMK-8 electrodes with various binders were examined and post-mortem analyses were conducted. With NaCMC/NaPAA binder, exceptional electrode capacities of 850 and 425 mAh g-1 were obtained at charge-discharge rates of 20 and 2000 mA g-1 , respectively. After 300 cycles, 90 % capacity retention was achieved. The thermal reactivity of the sodiated electrodes was studied by using differential scanning calorimetry. The binder effects on NIB safety, in terms of thermal runaway, are discussed.

Three-dimensional interpenetrating mesoporous carbon confining SnO2 particles for superior sodiation/desodiation properties.

Nanosized SnO2 particles (∼2 nm in diameter) are embedded in ordered mesoporous CMK-8 carbon with unique three-dimensional interconnected pore channels and used as a sodium-ion battery (NIB) anode. Due to the CMK-8 confinement effects, the growth of SnO2 is suppressed during synthesis, leading to high material electroactivity. The CMK-8 not only serves as an electronic conducting pathway, but also creates interpenetrating tunnels, which guarantee electrolyte accessibility and thus Na+ transport throughout the electrode. Moreover, the change in the SnO2 volume during sodiation/desodiation can be accommodated by the CMK-8 framework. With a high tap density of ∼1000 mg cm-3 (vs. ∼800 mg cm-3 for the conventional NIB anode, hard carbon), the SnO2/CMK-8 anode shows a high reversible capacity of 800 mA h g-1 and excellent rate capability, delivering 330 mA h g-1 in ∼10 min. The electrode charge storage mechanism is examined using synchrotron X-ray diffraction. We confirm that CMK-8 incorporation can effectively promote the SnO2-Sn conversion reaction and Sn-Na alloying reaction, which are known to be thermodynamically/kinetically difficult, increasing the electrode charge-discharge performance.

Ethane-bridged periodic mesoporous organosilicas functionalized with high loadings of carboxylic acid groups: synthesis, bifunctionalization, and fabrication of metal nanoparticles.

Well-ordered periodic mesoporous organosilicas (PMOs) functionalized with high contents of carboxylic acid (COOH) groups, up to 85 mol % based on silica, were synthesized by co-condensation of 1,2-bis(triethoxysilyl)ethane (BTEE) and carboxyethylsilanetriol sodium salt (CES) under acidic conditions by using alkyl poly(oxyethylene) surfactant Brij 76 as a structure-directing agent. A variety of techniques including powder X-ray diffraction (XRD), nitrogen adsorption/desorption, Fourier-transformed infrared (FTIR), transmission electron microscopy (TEM), (13) C- and (29) Si solid-state nuclear magnetic resonance (NMR) were used to characterize the products. The materials thus obtained were used as an effective support to synthesize metal nanoparticles (Ag and Pt) within the channel of 2D hexagonal mesostructure of PMOs. The size and distribution of the nanoparticles were observed to be highly dependent on the interaction between the carboxylic acid functionalized group and the metal precursors. The size of Pt nanoparticles reduced from 3.6 to 2.5 nm and that of Ag nanoparticles reduced from 5.3 to 3.4 nm with the increase in the COOH loading from 10 to 50 %.