Removal of Bisphenol S (BPS) by Adsorption on Activated Carbons Commercialized in Brazil.

This study assessed three powdered activated carbons (BETM, COCO, and SIAL) commercialized in Brazil at the bench scale in agitated reactors, analyzing their kinetic behavior and adsorptive capacity for BPS and BPA in ultrapure water. BETM exhibited the highest adsorption capacities (Q0max) for BPS and BPA at 260.62 and 264.64 mg/g, respectively, followed by SIAL, with a Q0max of 248.25 mg/g for BPS and for 231.20 mg/g BPA, and COCO, with a Q0max of 136.51 mg/g for BPS and 150.03 mg/g for BPA. The Langmuir isotherm model can describe the processes well. A pseudo-second-order model can describe the adsorption kinetics, and SIAL carbon had the highest rate constants (7.45 × 10-3 mg/g/min for BPS and 2.84 × 10-3 mg/g/min for BPA). The Weber-Morris intraparticle diffusion model suggests intraparticle diffusion as the rate-limiting step of all adsorption processes. Boyd's model confirmed more than the mechanism actuating in the bisphenol adsorption. The results suggest that adsorbents with basic surfaces, high specific surface areas, and high mesopore volumes tend to remove BPS and BPA efficiently. Therefore, activated carbons can effectively complement the existing treatment in Brazilian water treatment plants (WTPs).

Use of wastewater alum-coagulation sludge as a phosphorus fertiliser - a mini review.

The use of aluminium (Al) salts, particularly alum, in coagulation is a widespread and conventional treatment method for eliminating pollutants, including phosphorus (P) which can cause eutrophication, from wastewater. However, a significant challenge of this process is the substantial amount of sludge generated, necessitating proper disposal. Historically, land disposal has been a common practice, but it poses potential issues for plant life on these lands. Despite the associated drawbacks, sludge contains elevated concentrations of vital plant nutrients like P and nitrogen, presenting an opportunity for beneficial use in agriculture. Given the imminent scarcity of P fertilizers due to the eventual depletion of high-grade P ores, this review explores the potential advantages and challenges of utilizing Al sludge as a P source for plants and proposes measures for its beneficial application. One primary concern with land application of Al sludge is its high levels of soluble Al, known to be toxic to plants, particularly in acidic soils. Another issue arises from the elevated Al concentration is P fixation and subsequently reducing P uptake by plants. To address these issues, soil treatment options such as lime, gypsum, and organic matter can be employed. Additionally, modifying the coagulation process by substituting part of the Al salts with cationic organic polymers proves effective in reducing the Al content of the sludge. The gradual release of P from sludge into the soil over time proves beneficial for plants with extended growth periods.

Membranes in Water Reclamation: Treatment, Reuse and Concentrate Management.

In this article, an extensive examination is provided on the possible uses of membranes and hybrid processes in wastewater treatment. While membrane technologies face certain constraints, such as membrane fouling and scaling, the incomplete elimination of emerging contaminants, elevated expenses, energy usage, and brine disposal, there are approaches that can address these challenges. Methods such as pretreating the feed water, utilizing hybrid membrane systems and hybrid dual-membrane systems, and employing other innovative membrane-based treatment techniques can enhance the efficacy of membrane processes and advance sustainability.

Suspended solid removal efficiency of plate settlers and tube settlers analysed by CFD modelling.

Removal of suspended solids from raw water is an essential process in water treatment plants. Conventional sedimentation tanks in water treatment plants occupy a large area and become expensive in urban areas. The use of plate settlers or tube settlers in sedimentation tanks to increase the efficiency and hence reduce the footprint of sedimentation tanks is an economical solution in water treatment. This study investigated the effectiveness of plate and tube settlers compared to conventional settlers in a water treatment plant. A three-dimensional Computational Fluid Dynamics (CFD) model was set up using ANSYS-CFX 17.2. Seven cases (a conventional settler, three plate settlers and three tube settlers) were analysed to compare the settler performances. The maximum removal efficiencies of all solid classes were approximately equal in plate and tube settlers with the same plate spacing and tube depth: around 100%, 67%, 28% and 9% for the solid classes with particle diameters of 41, 17, 9.5 and 5.0 µm, respectively. The settling efficiency remained unchanged with the increase of the plate settling area beyond 60% of the conventional settler area under the given tank and flow conditions. The tube cross-section shape does not affect the particle removal efficiency of a tube settler.

Bisphenols in water: Occurrence, effects, and mitigation strategies.

Bisphenols (bisphenol A (BPA), bisphenol S (BPS), bisphenol F (BPF) and bisphenol AF (BPAF)) are widely used as additives in numerous industries and therefore they are ubiquitously present throughout the world's natural environment including water. A review of the literature is presented on their sources, pathways of entry into the environment, and especially aquatic contexts, their toxicity to humans and other organisms and the technologies for removing them from water. The treatment technologies used are mostly adsorption, biodegradation, advanced oxidation, coagulation, and membrane separation processes. In the adsorption process, several adsorbents, especially carbon-based materials, have been tested. The biodegradation process has been deployed and it involves a variety of micro-organisms. Advanced oxidation processes (AOPs) such as UV/O3-based, catalysis relevant AOPs, electrochemical AOPs and physical AOPs have been employed. Both the biodegradation process and AOPs generate by-products which may be toxic. These by-products need to be subsequently removed using other treatment processes. Effectiveness of the membrane process varies depending on the porosity, charge, hydrophobicity, and other properties of the membrane. The problems and limitations of each treatment technique are discussed and methods to overcome them are presented. Suggestions are articulated to use a combination of processes to improve the removal efficiencies.

Removal of Organics with Ion-Exchange Resins (IEX) from Reverse Osmosis Concentrate.

Reverse osmosis concentrate (ROC) produced as the by-product of the reverse osmosis process consists of a high load of organics (macro and micro) that potentially cause eco-toxicological effects in the environment. Previous studies focused on the removal of such compounds using oxidation, adsorption, and membrane-based treatments. However, these methods were not always efficient and formed toxic by-products. The impact of ion-exchange resin (IEX) (Purolite®A502PS) was studied in a micro-filtration-IEX hybrid system to remove organics from ROC for varying doses of Purolite® A502PS (5-20 g/L) at a flux of 36 L/m2h. The purolite particles in the membrane reactor reduced membrane fouling, evidenced by the reduction of transmembrane pressure (TMP), by pre-adsorbing the organics, and by mechanically scouring the membrane. The dissolved organic carbon was reduced by 45-60%, out of which 48-81% of the hydrophilics were removed followed by the hydrophobics and low molecular weight compounds (LMWs). This was based on fluorescence excitation-emission matrix and liquid chromatography-organic carbon detection. Negatively charged and hydrophobic organic compounds were preferentially removed by resin. Long-term experiments with different daily replacements of resin are suggested to minimize the resin requirements and energy consumption.

Treatment Trends and Combined Methods in Removing Pharmaceuticals and Personal Care Products from Wastewater-A Review.

When discharged into wastewater, pharmaceuticals and personal care products (PPCPs) become microorganic contaminants and are among the largest groups of emerging pollutants. Human, animal, and aquatic organisms' exposures to PPCPs have linked them to an array of carcinogenic, mutagenic, and reproductive toxicity risks. For this reason, various methods are being implemented to remove them from water bodies. This report critically reviews these methods and suggests improvements to removal strategies. Biological, physical, and chemical methods such as biological degradation, adsorption, membrane filtration, and advanced electrical and chemical oxidation are the common methods used. However, these processes were not integrated into most studies to take advantage of the different mechanisms specific to each process and are synergistic in the removal of the PPCPs that differ in their physical and chemical characteristics (charge, molecular weight, hydrophobicity, hydrogen bonding, structure). In the review articles published to date, very little information is available on the use of such integrated methods for removing PPCPs. This report attempts to fill this gap with our knowledge.

Morphological image analysis of biofilm evolution with quantitative analysis in a moving bed biofilm reactor.

The quantitative analysis of biomass is essential for the research and application of moving bed biofilm reactors (MBBRs). However, the difficulty in measuring the attached growing biomass hinders the quantitative analysis of biofilm processes. In this study, a pilot-scale MBBR system was established to investigate biofilm evolution. The quantity of active heterotrophic and autotrophic biomass was measured throughout the entire culturing process. The total active biomass reached 250 mg COD/m2 when the biofilm attachment and detachment were balanced, and the corresponding autotrophic biomass contributes to as high as 17 % of the total biomass. Furthermore, quantitative image analysis was performed to obtain the thickness and morphological data of the biofilm evolution. Multivariate regression models were constructed based on the morphological data, which provided satisfactory prediction accuracy for the biofilm thickness and maturation. The most suitable carrier spots for biomass quantification and biofilm maturation were suggested. This work provided the life-cycle information of biofilm quantity and morphology of the MBBR, which contributes to the quantitative understanding of biofilm evolution at MBBRs.

Submerged membrane/adsorption hybrid process in water reclamation and concentrate management-a mini review.

Clean water shortage is a major global problem due to escalating demand resulting from increasing human population growth and industrial activities, decreasing freshwater resources and persistent droughts. Recycling and reuse of wastewater by adopting efficient reclamation techniques can help solve this problem. However, wastewater contains a wide range of pollutants, which require removal before it may be reused. Adsorption and membrane processes are two successful treatments used to remove most of these pollutants. Their efficiency increases when these processes are integrated as observed, for example in a submerged membrane adsorption hybrid system (SMAHS). It uses coarse air bubbling/sparging to produce local shear which minimises reversible membrane fouling, improves performance and extends the life of the membrane. Additionally, the adsorbent acts as a buoyant media that produces an extra shearing effect on the membrane surface, reduces membrane resistance and increases flux. In addition, it adsorbs the organics that would otherwise deposit on and cause fouling of the membrane. The use of activated carbon (AC) adsorbent in SMAHS is very effective in removing most pollutants including natural organic matter (NOM) and organic micropollutants (OMPs) from wastewaters and membrane concentrate wastes, the latter being a serious problem in practical applications of the reverse osmosis process. However, certain NOM fractions and OMPs (i.e. hydrophilic and negatively charged ones) are not efficiently removed by AC. Other adsorbents need to be explored for their effective removal.

Effects of Viscosity on Submerged Membrane Microfiltration Systems.

Submerged microfiltration has a wide range of applications in water and wastewater treatment. Membrane fouling is a major problem, resulting in a severe decline in flux, high energy consumption and frequent membrane cleaning and replacement. The effect of viscosity was not previously studied under controlled conditions to relate it to the air scour. Hence, this study investigated the effect of viscosity on membrane fouling during the operation of submerged membrane microfiltration by adding predetermined amounts of glycerol to a kaolin clay suspension. The addition of glycerol increased the viscosity (from 0.001 to 0.003 Pa·s), resulting in a 3-fold higher transmembrane pressure (TMP) development. An increased airflow (air scour) rate by 3 fold (from 0.6 m3/m2/h to 1.8 m3/m2/h), reduced TMP development by 65%. Membrane fouling quickly developed during the initial stage of microfiltration operation. Therefore, special precautions to control fouling during the early stages of filtration could significantly enhance the operation of the microfilter. Higher airflow caused a reduction in average specific cake resistance, whereas higher viscosity increased this value.

Ozonation/adsorption hybrid treatment system for improved removal of natural organic matter and organic micropollutants from water - A mini review and future perspectives.

Elevated concentrations of natural organic matter (NOM) and organic micropollutants (OMPs) can contaminate the quality of drinking water, and current water treatment technologies are not always successful in removing all their constituents. Ozonation and adsorption are two advanced processes with different removal mechanisms used to treat NOM and OMPs. Their treatment efficiency depends on the strength and kinetics of adsorption and ozonation (ozone molecule and OH radical (OH•) reaction) of the individual NOM constituents and OMPs. They are individually able to remove many of the NOM fractions and OMPs but not satisfactory in removing the vast array of their components which differ in their physico-chemical characteristics, for example molecular weight, charge, functional groups, aromaticity, and hydrophobicity/hydrophilicity. Significant progress has been made by integrating these processes (ozonation followed by activated carbon (AC) adsorption) but they need further improvement to efficiently target all NOM fractions and the various OMPs. Ozonation transforms the larger NOM molecules into smaller molecular sizes with lower aromaticity and hydrophobicity, subsequently resulting in reduced adsorption. The reduced adsorption of these molecules diminishes their competition against OMP adsorption resulting in increased OMP removal. Adsorption can remove unoxidized pollutants as well as the by-products of ozonation, and some of them are suspected to be human carcinogens. Of the commonly used adsorbents, anion exchange resin and AC, the former has higher affinity towards negatively charged humic fraction and OMPs. Conversely, the latter has higher affinity towards the hydrophobic constituents and smaller sized constituents which diffuse into AC pores and get adsorbed. Biofilm formed by long-term use of AC also contributes to enhanced removal of NOM and OMPs. This paper briefly reviews the currently available literature on removing NOM and OMPs by the ozonation/adsorption integrated process. It also suggests a new method for further increasing the efficiency of this process.

Pharmaceuticals and personal care products in aquatic environments and their removal by algae-based systems.

The consumption of pharmaceuticals and personal care products (PPCPs) has been widely increasing, yet up to 90-95% of PPCPs consumed by human are excreted unmetabolized. Moreover, the most of PPCPs cannot be fully removed by wastewater treatment plants (WWTPs), which release PPCPs to natural water bodies, affecting aquatic ecosystems and potentially humans. This study sought to review the occurrence of PPCPs in natural water bodies globally, and assess the effects of important factors on the fluxes of pollutants into receiving waterways. The highest ibuprofen concentration (3738 ng/L) in tap water was reported in Nigeria, and the highest naproxen concentration (37,700 ng/L) was reported in groundwater wells in Penn State, USA. Moreover, the PPCPs have affected aquatic organisms such as fish. For instance, up to 24.4 × 103 ng/g of atenolol was detected in P. lineatus. Amongst different technologies to eliminate PPCPs, algae-based systems are environmentally friendly and effective because of the photosynthetic ability of algae to absorb CO2 and their flexibility to grow in different wastewater. Up to 99% of triclosan and less than 10% of trimethoprim were removed by Nannochloris sp., green algae. Moreover, variable concentrations of PPCPs might adversely affect the growth and production of algae. The exposure of algae to high concentrations of PPCPs can reduce the content of chlorophyll and protein due to producing reactive oxygen species (ROS), and affecting expression of some genes in chlorophyll (rbcL, psbA, psaB and psbc).

Economic Model Predictive Control for optimal struvite recovery.

Resource recovery from municipal wastewater has been a prime focus for a decade. Although several recovery processes already exist in the market today, the high cost of material, inherent disturbance in the influent quality, lack of real time monitoring of critical parameters, and lack of a robust automation system may result in suboptimal performance. This work attempts to construct a model based predictive control for optimal operation of a struvite recovery unit in a full scale WRRF. A multi-parameter based predictive control has been developed by implementing an Economic Model Predictive Controller (EMPC) for optimal dosing of magnesium hydroxide in a struvite recovery unit. The EMPC used customized objective function for real-time optimization of performance and economical parameters of the crystallization unit. The effectiveness of the proposed EMPC controller is verified through tests conducted on the Benchmark Simulation Model No. 2 (BSM2d.). The results obtained from the simulator-based evaluation of EMPC demonstrate a significant improvement in resource recovery at reduced operational costs. The economic advantages of implementing an EMPC compared to proportional and constant magnesium dosage has also been enumerated.

Analysing consequences of infiltration and inflow water (I/I-water) using cost-benefit analyses.

The Municipality of Asker (Norway) is at risk of not meeting the water quality targets set by the European Union Water Framework Directive within the stipulated timeframe. While there are multiple factors negatively impacting water quality in the municipality, wastewater is likely to be a major contributor. Infiltration and inflow water (I/I-water) leads to a number of unwanted consequences, of which direct discharge of untreated wastewater through overflow points is particularly important. In Aker municipality the portion of I/I-water is about 63%, while the goal is to achieve a level of about 30%. This study utilises a socio-economic cost-effectiveness analysis of measures to prevent sewer overflows into waterbodies. The most effective alternative identified in the analysis is a complete renovation of old pipes in combination with troubleshooting for faulty stormwater connections, when compared to alternatives considering upsizing/retention. I/I-water cost the municipality of Asker NOK34 million in 2017, when using a price of NOK16,434 for each kg of total phosphorus (Tot-P) let into the recipient water bodies. If the phosphorus cost is equal to or less than NOK17,806/kg Tot-P, then it will not be socio-economically justified to reduce I/I-water.

Chemical Enhancement for Retrofitting Moving Bed Biofilm and Integrated Fixed Film Activated Sludge Systems into Membrane Bioreactors.

Positive effects of retrofitting MBBR and IFAS systems into MBRs can be exploited by introducing chemical enhancement applying coagulants in the membrane separation step. The current study reports basic principles of chemical enhancement with aluminium sulphate coagulant in biofilm-MBR (Bf-MBR) based on results of total recycle tests performed at different dosages of the chemical enhancer and properties characterization of filtrates, supernatants and sediments. It demonstrates a possibility to achieve lower membrane fouling rates with dosing of aluminium sulphate coagulant into MBBR and IFAS mixed liquors by extending operational cycles by 20 and 80 time respectively as well as increasing operating permeability of membrane separation by 1.3 times for IFAS. It has been found that charge neutralization is the dominating mechanism of aluminium sulphate action as a chemical enhancer in Bf-MBR, however, properties of the membrane surface influencing charge repulsion of foulants should be considered together with the secondary ability of the coagulant to improve consolidation of sediments.

Implementing an Extended Kalman Filter for estimating nutrient composition in a sequential batch MBBR pilot plant.

Online monitoring of water quality parameters can provide better control over various operations in wastewater treatment plants. However, a lack of physical online sensors, the high price of the available online water-quality analyzers, and the need for regular maintenance and calibration prevent frequent use of online monitoring. Soft-sensors are viable alternatives, with advantages in terms of price and flexibility in operation. As an example, this work presents the development, tuning, implementation, and validation of an Extended Kalman Filter (EKF) on a grey-box model to estimate the concentration of volatile fatty acids (VFA), soluble phosphates (PO4-P), ammonia nitrogen (NH4-N) and nitrate nitrogen (NO3-N) using simple and inexpensive sensors such as pH and dissolved oxygen (DO). The EKF is implemented in a sequential batch moving bed biofilm reactor (MBBR) pilot scale unit used for biological phosphorus removal from municipal wastewater. The grey-box model, used for soft sensing, was constructed by fitting the kinetic data from the pilot plant to a reduced order version of ASM2d model. The EKF is successfully validated against the standard laboratory measurements, which confirms its ability to estimate various states during the continuous operation of the pilot plant.

Microbial community composition of a multi-stage moving bed biofilm reactor and its interaction with kinetic model parameters estimation.

Microbial community diversity determines the function of each chamber of multi-stage moving bed biofilm reactor (MBBR) systems. How the microbial community data can be further used to serve wastewater treatment process modelling and optimization has been rarely studied. In this study, a MBBR system was set up to investigate the microbial community diversity of biofilm in each functional chamber. The compositions of microbial community of biofilm from different chambers of MBBR were quantified by high-throughput sequencing. Significantly higher proportion of autotrophs were found in the second aerobic chamber (15.4%), while 4.3% autotrophs were found in the first aerobic chamber. Autotrophs in anoxic chamber were negligible. Moreover, ratios of active heterotrophic biomass and autotrophic biomass (XH/XA) were obtained by performing respiration tests. By setting heterotroph/autotroph ratios obtained from sequencing analysis equal to XH/XA, a novel approach for kinetic model parameters estimation was developed. This work not only investigated microbial community of MBBR system, but also it provided an approach to make further use of molecular microbiology analysis results.

Identifying critical components causing seasonal variation of activated sludge settleability and developing early warning tool.

Settleability of activated sludge is one of the most common problems that restricts the efficiency of activated sludge system. Obvious seasonal variation of settleability was found in the activated sludge system of a full scale wastewater treatment plant (WWTP) during 2 years of observation. Principal component analysis (PCA) was applied to study the correlation between diluted sludge volume index (DSVI), operational and environmental factors. As a result, temperature and mixed liquid suspended solids (MLSS) were found as the most significant variables relating with DSVI variation. Multivariate regression, partial least squares regression and support vector machine regression were applied to develop early warning models for DSVI prediction. The multivariate regression model was proved as a simple and easy-to-interpret early warning tool to be applied in practice. Based on the ratio of volatile substances in biomass, the original cause of seasonal variation of settleability was further discussed by referring the storage-biodegradation mechanism. Moreover, the results of this work also suggested that modern statistical techniques were important to investigate complicated engineering problems. This study provided insights of seasonal variation of activated sludge settleability by systematic investigation of long-term data of a full scale WWTP.

A novel automatic flow method with direct-injection photometric detector for determination of dissolved reactive phosphorus in wastewater and freshwater samples.

The novel automatic flow system, direct-injection detector (DID) integrated with multi-pumping flow system (MPFS), dedicated for the photometric determination of orthophosphates in wastewater and freshwater samples is for the first time described. All reagents and the sample were injected simultaneously, in counter-current into the reaction-detection chamber by the system of specially selected for this purpose solenoid micro-pumps. The micro-pumps provided good precision and accuracy of the injected volumes. For the determination of orthophosphates, the molybdenum blue method was employed. The developed method can be used to detect orthophosphate in the range 0.1-12 mg L-1, with the repeatability (RSD) about 2.2% at 4 mg L-1 and a very high injection throughput of 120 injections h-1. It was possible to achieve a very small consumption of reagents (10 µL of ammonium molybdate and 10 µL of ascorbic acid) and sample (20 µL). The volume of generated waste was only 440 µL per analysis. The method has been successfully applied, giving a good accuracy, to determination of orthophosphates in complex matrix samples: treated wastewater, lake water and reference sample of groundwater. The developed system is compact, small in both size and weight, requires 12 V in supply voltage, which are desirable for truly portable equipment used in routine analysis. The simplicity of the system should result in its greater long-time reliability comparing to other flow methods previously described.

Statistical monitoring and dynamic simulation of a wastewater treatment plant: A combined approach to achieve model predictive control.

The on-line monitoring of Chemical oxygen demand (COD) and total phosphorus (TP) restrains wastewater treatment plants to achieve better control of aeration and chemical dosing. In this study, we applied principal components analysis (PCA) to find out significant variables for COD and TP prediction. Multiple regression method applied the variables suggested by PCA to predict influent COD and TP. Moreover, a model of full-scale wastewater treatment plant with moving bed bioreactor (MBBR) and ballasted separation process was developed to simulate the performance of wastewater treatment. The predicted COD and TP data by multiple regression served as model input for dynamic simulation. Besides, the wastewater characteristic of the wastewater treatment plant and MBBR model parameters were given for model calibration. As a result, R2 of predicted COD and TP versus measured data are 81.6% and 77.2%, respectively. The model output in terms of sludge production and effluent COD based on predicted input data fitted measured data well, which provides possibility to enabled model predictive control of aeration and coagulant dosing in practice. This study provide a feasible and economical approach to overcome monitoring and modelling restrictions that limits model predictive control of wastewater treatment plant.