Effect of Acrylic Removable Partial Denture in Caries Prevalence Among Diabetic and Non-Diabetic Patients.

Background: Dental caries is the most prevalent dental disease affecting human race. The etiology and pathogenesis of dental caries are known to be multifactorial. Studies have shown that removable partial dentures in the oral cavity increases the biofilm formation and consequently an increase in the occurrence of caries and periodontal diseases. There is a complex relationship between diabetes mellitus and dental caries. Patients with diabetes are more susceptible to oral sensory, periodontal, and salivary disorders which could increase the risk of developing new and recurrent dental caries. Therefore, the aim of the study was to assess the prevalence of dental caries among diabetic and non-diabetic acrylic removable partial denture wearers. Materials and Methods: Individuals participating in the study were partially edentulous and aged between 18 and 64 years. Patients were screened at Out patient department (OPD) in the Department of Prosthodontics JSSDCH, among which 60 patients were diabetic based on the random blood sugar level more than 160 mg/dl-30 patients were wearing RPD and 30 were without RPD. And 60 non-diabetic patients were selected among which 30 were wearing RPD and 30 without RPD. A total 120 patients were screened. Dental caries prevalence was assessed using Decayed, Missing, Filled (DMFT) index. Results: Diabetic group unrehabilitated with removable partial prosthesis showed significant difference in the number of missing teeth when compared to non-diabetic patients without removable prosthesis (P < 0.05). Conclusion: Removable partial denture prosthesis had less impact on prevalence of dental caries with good oral hygiene, following post insertion RPD instructions and regular dental visits irrespective of diabetes.

Antibacterial Efficacy of Hubballi Propolis against Aggregatibacter Actinomycetemcomitans One of the Major Causative Organisms of Perimplantitis: An In vitro Study.

Background: Peri-implantitis can be attributed to many underlying causes, one of the chief ones being due to infection caused by oral micro flora and particularly Aggregatibacter actinomycetemcomitans. Antibiotics are administered along with mechanical debridement to control the infection. The side effect of conventional antibiotic therapy and drug resistance has led to the necessity for alternate approaches to handle infections. Natural products are being investigated because of their multi-target activity and structurally different from the normal antibiotics. Propolis a product by Apis Mellifera bees as a wound healing and bone regenerating effect along with antimicrobial effect. One of the important features of Propolis is the chemical properties of Propolis changes with the different locations of procurement. Antimicrobial activity of Hubballi propolis against Aggregatibacter actinomycetemcomitans is not been reported in the literature. Aim: The aim of this study is to evaluate the antimicrobial effect of the Hubballi Propolis against Aggregatibacter actinomycetemcomitans. Methods: The two solvents used for the study were water and 70% Aq ethanol. Minimum inhibitory concentration (MIC), total phenolic contents (TPC), and total flavonoid content (TFC) were tested. Results: Hubballi Propolis sample showed antimicrobial effect against Aggregatibacter actinomycetemcomitans with MIC range from 0.1 mg/ml to 0.25 mg/ml. Conclusion: Hubballi Propolis is effective against Aggregatibacter actinomycetemcomitans infection thus may help in treating peri-implantitis. Propolis extracted with water as solvent showed better MIC, higher TPC and TFC than the propolis extracted using alcohol as solvent. This feature is noteworthy as the formulations produced using water extract is favorable than alcohol extract of propolis which irritates the mucosa and hence difficult for its application in dentistry.

Influence of Domestic Exposure to Polycyclic Aromatic Hydrocarbons on Women's Periconceptional Stage and Associated Risk of Oral Cleft in Offspring.

Background: Polycyclic aromatic hydrocarbons (PAHs) constitute a group of chemicals with an omnipresence in the environment and our surroundings. With their genotoxicity and carcinogenic nature, it has been proven to be monstrous in our daily life and, especially for pregnant women and their newborn. Aim: This questionnaire study was done to verify the influence of domestic exposure to polyaromatic hydrocarbons on women's periconceptional stage and risk of oral cleft in offspring in the suburban and the rural population of Mysore. Methodology: Two hundred pregnant women as patients from four different hospitals in Mysore were given a questionnaire to be filled with 24 parameters ranging from the knowledge to various means of exposure to the pregnant women with the PAH and the severity and the extent of the orofacial defect in the newborn. Results: It was determined that exposure of pregnant women to the smoke emanating from the method of cooking or heating to smoking (first or passive) and the direct inhalation of gas had the maximum effects on the association of cleft palate (60.7%) in unilateral followed by 90.9% in bilateral, 65.0% in soft tissue, and 76.2% in hard tissue cleft palate. Conclusion: The deleterious effects of the cooking and water heating measures practiced in the suburban and the rural population predisposed the pregnant women to significantly higher chances of offspring with the varied extent of the orofacial defect. There is an influence of domestic exposure to polycyclic aromatic hydrocarbons on women's periconceptional stage and risk of oral cleft in offspring.

Prosthetic Rehabilitation of Rhino Orbital Mucormycosis Associated with COVID-19: A Case Series.

Mucormycosis, a rare fungal infection seen in diabetes, is now very frequent owing to the deadly triad of COVID-19 infection, diabetes, and rampant use of corticosteroids. Immediate management revolves around therapeutic drugs like antifungals, antibiotics, and aggressive surgical debridement. The cases described in the article explain prosthetic rehabilitation of maxillectomy defects. The findings focus on prosthetic rehabilitation of patients with acquired maxillectomy defects after mucormycotic necrosis post-COVID-19 infection and the techniques to overcome the complications like lack of supporting tissues and post-surgical microstomia. The maxillectomies were performed on patients who suffered a superinfection of mucormycosis after COVID-19 contraction and uncontrolled blood sugar levels. Case 1 elaborates a technique to overcome the complications like lack of supporting structures and microstomia by fabrication of sectional and hollow obturator prostheses using sectional impression technique and lost salt technique. Case 2 explains the management of an extensive defect with a mobile soft tissue flap and lone standing tooth by using a functional impression technique to gain retention and support from the remaining soft and hard tissues. Both the techniques overcome the clinical complications and give predictable outcomes. Prosthetic rehabilitation of such challenging cases needs modifications depending upon the clinical challenges encountered.

Unusual case presentation of an aneurysmal bone cyst of maxilla in geriatric patient: A diagnostic challenge.

An aneurysmal bone cyst (ABC) is a non-neoplastic, rapidly expanding pathologic bone lesion that mostly affects the mandible and is most commonly found in the first to third decade of life. The most of the ABC cases are locally aggressive osteolytic lesion with a high recurrence rate. As a result, we present a swelling with pus discharge at the maxillary alveolus in a 68-year-old female who was diagnosed with ABC after a computed tomography scan and histological analysis. The conservative surgical excision was performed without considerable bleeding, and no recurrence was observed even after a five-year follow-up period.

Analysis of antimicrobial activity of Karnataka propolis against oral pathogens - An in vitro study.

Background: Propolis, a natural antibiotic, which is in high demand in dentistry is a resinous substance. The main ingredient of propolis that is required for antibiotic effect is flavonoids and phenolic acids. Although propolis is a promising option for the control of oral microbes with lower related hazards and a good immunomodulator effect, its composition differs considerably depending on its botanical origin, the site and the season of collection. This original research aims to find the chemical composition and minimum inhibitory concentration (MIC) of propolis procured from different places of Karnataka state. The results would help the dentist and the pharmacist to select the best propolis to use as antibiotics in treating oral disease. Materials and Methods: Propolis sample from 5 different locations of Karnataka was procured from single apiary in Bangalore. Extraction of propolis using two different extracting solvents was carried out. The total phenolic content, total flavonoid content and MIC of each sample were analyzed. Results: Water extract propolis of Sullia and Hubli was highly active against tested organism with the MIC <0.312; alcohol extract of Sullia, Hubli and Chitradurga was moderately active with the MIC between 0.312 and 5 mg/ml. Vijayapura and Bagalkot were least active with the MIC >5 mg/ml at tested concentration. Conclusion: Propolis procured from different locations of Karnataka can be used as an antimicrobial agent with varying concentrations. However, when propolis is procured for therapeutic purpose, then it needs to be tested for its chemical composition before being utilized.

Marginal and internal fit evaluation of conventional metal-ceramic versus zirconia CAD/CAM crowns.

BACKGROUND: The purpose of this in vivo study was to compare the marginal and internal gap widths of monolithic zirconia crowns fabricated by CAD/CAM technique and metal-ceramic crowns fabricated by conventional technique. MATERIAL AND METHODS: 10 participants needing a single restoration were selected. Zirconia crowns using CAD/CAM technology (Group A) (n=10) and metal-ceramic crowns (Group B) (n=10) using lost wax casting technique were fabricated for each selected tooth. The marginal and internal gaps of crowns were recorded using a replica technique with light body silicone material stabilized with a regular set putty. Each replica was sectioned buccolingually and mesiodistally and then evaluated at five pre-determined sites. The points measured were PM for marginal gap, PA for axial gap, PAO for axio-occlusal transition gap and PO and PCO for occlusal gaps using a stereomicroscope at 30× magnification. The Paired Sample (t) test was used to detect significant differences between the two groups in terms of marginal and internal fit (α= 0.05). RESULTS: The mean for the marginal gap was 77.42µm (±39.5µm) for Group A compared with 95.86µm (±55.12µm) for Group B. Mean values for internal gap was 87.24 (±21.7 µm) for Group A and 132.91 µm (± 50.63 µm) for Group B. Significant differences were observed between both the groups for marginal (p=.010) and internal (p=.000) fit. CONCLUSIONS: The CAD/CAM fabricated zirconia crowns demonstrated a better accuracy of fit when compared to metal-ceramic crowns fabricated by conventional technology. Key words:Marginal fit, Internal fit, Computer-aided design/computer-aided manufacturing (CAD/CAM).