Electro-chemical studies of Zn doped nickel oxide nanoparticles synthesized via solution combustion method using green and chemical fuels.

This study presents a new green solution combustion method (aloe vera gel extract as fuel) and chemical method (glucose as fuel) to synthesise Zn-doped nickel oxide nanoparticles (Zn:NiO NPs). The face centered cubic crystal structure (FCC) phase was validated by PXRD, while the produced samples' spongy, spherical, agglomerated, and porous characteristics were shown by electron microscopy. The energy band gap values of 4.21 eV and 4.09 eV, respectively, were deduced for green and chemically synthesized Zn:NiO NPs. The reversibility was demonstrated by cyclic voltammetry with a lower EO-ER value for the green-Zn:NiO electrode. The studies on electrochemical impedance confirmed strong conductivity for the NPs by demonstrating a low charge transfer resistance. The Zn:NiO NPs are easily convertible into a stable electrode material that may be used in supercapacitors. According to the findings, Zn:NiO is an economical and promising material for use in supercapacitors in the future.

In Situ Green Synthesis of Co3O4@ZnO Core-Shell Nanoparticles Using Datura stramonium Leaf Extract: Antibacterial and Antioxidant Studies.

Investigating and synthesizing potent antibacterial NPs using biological methods is highly preferred, and it involves nontoxic, cost-effective, and environmentally friendly chemicals and methods. Antibiotic drug resistance and oxidative stress have become a serious public health issue worldwide. Hence, the key objective of this study was to biologically synthesize and characterize the potent antibacterial Co3O4@ZnO core-shell nanoparticles for the antibacterial application. The radical scavenging ability of green synthesized Co3O4@ZnO core-shell nanoparticles was also determined. In this study, Co3O4@ZnO core-shell nanoparticles (CZCS NPs) have been synthesized using three different core to shell materials ratios of Co3O4 to ZnO (0.5 : 0.25 CZCS (1), 0.5 : 0.5 CZCS (2), and 0.5 : 0.75 M CZCS (3)) by employing Datura stramonium leaf extract. The polycrystalline nature of Co3O4@ZnO core-shell nanoparticles was investigated using the XRD and SAED characterization techniques. The investigated nanostructure of Co3O4@ZnO core-shell nanoparticles appeared with Co3O4 as the core and ZnO as an outer shell. Additionally, a variety of physicochemical properties of the nanoparticles were determined using various characterization techniques. The average crystallite sizes of CZCS (1), CZCS (2), and CZCS (3) were found to be 24 ± 1.4, 22 ± 1.5, and 25 ± 1.5 nm, respectively. The band gap energy values for CZCS (1), CZCS (2), and CZCS (3) determined from the UV-DRS data were found to be 2.75, 2.76, and 2.73 eV, respectively. The high inhibition activities against S. aureus, S. pyogenes, E. coli, and P. aeruginosa bacterial strains were obtained for the small size CZCS (2) nanoparticles at the concentration of 100 mg/mL with 22 ± 0.34, 19 ± 0.32, 18 ± 0.45, and 17 ± 0.32 mm values, respectively. The high inhibition performance of CZCS (2) nanoparticles against Gram-positive and Gram-negative bacteria which is even above the control drug ampicillin is because of its small size and synergistic effect. The percentage scavenging activity of Co3O4@ZnO core-shell nanoparticles was also studied and CZCS (2) nanoparticles showed a good scavenging capacity (86.87%) at 500 µg/mL with IC50 of 209.26 µg/mL.

Exploring the potential of sulphur forms in Northeastern Indian coals: Implications in environmental remediation and heavy metal sensing.

The Sampar Coalfield in Northeastern India is a source of plentiful coal reserves, which are burnt for energy production and industrial applications, resulting in the release of pollutants such as sulphur , arsenic, and lead, which are hazardous to the environment and public health. In this work, samples from the Sampar coalfield have been analyzed to understand the origin, distribution, and various forms of sulphur and their ability to detect toxic heavy metals. The total sulphur concentration ranged from 4.31% to 6%, with organic sulphur being the predominant form at 69.21%, followed by pyritic sulphur at 16.49% and sulphate sulphur at 14.28%. With high sulphur content, this coal indicates a marine influence in the peat-forming swamps. The samples have also been examined for petrographic and elemental analysis, which have revealed the presence of vitrinite, liptinite, inertinite, carbon, hydrogen, nitrogen, oxygen, and mineral matter. In addition, the same coal sample has also been used for electrochemical sensing-based detection of toxic heavy metals like arsenic and lead, and the findings indicate an improved efficacy. These results are expected to have significant implications in the development of effective bio-based remediation strategies in the region to mitigate the harmful effects of coal-related pollution.

Solanum tuberosum Leaf Extract Templated Synthesis of Co3O4 Nanoparticles for Electrochemical Sensor and Antibacterial Applications.

Green synthesis of metal oxide nanoparticles (NPs) is a viable alternative methodology because of cost-effective and availability of environmentally friendly templates for desired application, which has attracted the attention of researchers in recent years. In the present study, Co3O4 NPs were synthesized in various volume ratios in the presence of Solanum tuberosum leaf extract as a template. The synthesized Co3O4 NPs were characterized by X-ray diffraction (XRD), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), surface area electron diffraction (SAED), UV-Vis diffuse reflectance spectroscopy (UV-DRS), and Fourier transform infrared (FTIR) spectroscopy. XRD analysis found that the average crystalline sizes for the 1 : 2, 1 : 1, and 2 : 1 volume ratios was 25.83, 21.05, and 27.98 nm, respectively. SEM-EDX and TEM analyses suggest that the green-synthesized Co3O4 NPs are spherical in shape without the presence of impurities. The band gap E g values of the 1 : 2, 1 : 1, and 2 : 1 volume ratios of Co3O4 NPs were found to be 1.83, 1.77, and 2.19 eV, respectively. FTIR analysis confirmed the presence of various bioactive ingredients within the leaf extract of Solanum tuberosum. Co3O4 NPs-modified electrodes showed better sensing capability towards ascorbic acid and citric acid due to enhanced electron transfer kinetics. Among three volume ratios (1 : 2, 1 : 1, and 2 : 1) of Co3O4 nanoelectrodes, 1 : 1 and 2 : 1 were identified as the best performing nanoelectrodes. This is possibly due to the high catalytic behavior and the more homogenized surface structure. Co3O4 (1 : 2) nanodrug showed the enhanced antibacterial activity (16 mm) towards S. aureus which is attributed to the formation of enhanced reactive oxygen species (ROS).

Early-stage culprit in protein misfolding diseases investigated using electrochemical parameters: New insights over peptide-membrane interactions.

The dysfunctioning of ß-cells caused by the unspecific misfolding of the human islet amyloid polypeptide (hIAPP) at the membrane results in type 2 diabetes mellitus. Here, we report for the first time, the early-stage interaction of hIAPP oligomers on the DMPC (1,2-dimyristoyl-sn-glycero-3-phosphocholine) lipid membrane using electrochemical parameters. Electrochemical techniques are better than other techniques to detect hIAPP at significantly lower concentrations. The surface level interactions between the peptide (hIAPP) and lipid membrane (DMPC) were investigated using atomic force microscopy (AFM), confocal microscopy (CM) and electrochemical techniques such as Tafel polarization, cyclic voltammetry (CV), differential pulse voltammetry (DPV), linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS). Inserting IAPP into the fluid domains results in breaking the lipid-to-lipid interaction, leading to restriction of membrane mobility. The SLateral values of the liposome and IAPP co-solubilized liposome indicates the cooperative insertion of IAPP. Further, a new method of immobilizing a membrane to the gold surface has been employed, resulting in an electrical contact with the buffer, preventing the direct utilization of a steady-state voltage across the bilayer. The electrochemical studies revealed that the charge transfer resistance decreased for 3-mercaptopropanoic acid modified gold (MPA-Au) electrode coated with the liposome and after the addition of IAPP, followed by an increase in the capacitance. The present study has opened up new dimensions to the understanding of peptide-membrane interactions and shows different experimental approaches for the future researchers in this domain.

Optical and Electrochemical Applications of Li-Doped NiO Nanostructures Synthesized via Facile Microwave Technique.

Nanostructured NiO and Li-ion doped NiO have been synthesized via a facile microwave technique and simulated using the first principle method. The effects of microwaves on the morphology of the nanostructures have been studied by Field Emission Spectroscopy. X-ray diffraction studies confirm the nanosize of the particles and favoured orientations along the (111), (200) and (220) planes revealing the cubic structure. The optical band gap decreases from 3.3 eV (pure NiO) to 3.17 eV (NiO doped with 1% Li). Further, computational simulations have been performed to understand the optical behaviour of the synthesized nanoparticles. The optical properties of the doped materials exhibit violet, blue and green emissions, as evaluated using photoluminescence (PL) spectroscopy. In the presence of Li-ions, NiO nanoparticles exhibit enhanced electrical capacities and better cyclability. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) results show that with 1% Li as dopant, there is a marked improvement in the reversibility and the conductance value of NiO. The results are encouraging as the synthesized nanoparticles stand a better chance of being used as an active material for electrochromic, electro-optic and supercapacitor applications.

Enhanced photocatalytic and electrochemical performance of TiO2-Fe2O3 nanocomposite: Its applications in dye decolorization and as supercapacitors.

This work reveals a green combustion route for the synthesis of TiO2, Fe2O3 and TiO2-Fe2O3 nanocomposites as photocatalysts for decolorization of Titan Yellow (TY) and Methyl Orange (MO) dyes at room temperature in aqueous solution concentration of 20 ppm under UV-light irradiation. We observed that the TiO2-Fe2O3 nanocomposite shows superior photocatalytic activity for TY dye compared to pure TiO2 and Fe2O3. Rate constant (k) values of TiO2, Fe2O3 and TiO2-Fe2O3 for TY and MO are 0.0194, 0.0159, 0.04396 and 0.00931, 0.00772 0.0119 kmin-1 respectively. The surface area and pore volume of TiO2-Fe2O3 nanocomposite were found to be 71.56 m2/g and 0.076 cm3/g, respectively as revealed by BET studies. From the Barrett-Joyner-Halenda (BJH) plot, the mean pore diameter of TiO2-Fe2O3 nanoparticles was found to be 2.43 nm. Further, the TiO2-Fe2O3 nanocomposite showed good electrochemical behavior as an electrode material for supercapacitors when compared to pure TiO2 and Fe2O3 nanoparticles resulted in stable electrochemical performance with nearly 100% coulombic efficiency at a scan rate of 10 mV/s for 1000 cycles. Interestingly, the novelty of this work is that the designed supercapacitors showed stable electrochemical performance even at 1000th cycle, which might be useful for rechargeable supercapacitor applications. The electrochemical properties of the nanocomposites were compared by the data obtained by cyclic voltammograms, charge-discharge tests and electrochemical impedance spectroscopic studies. These results demonstrated that the TiO2-Fe2O3 nanocomposite showed stable performance compared to TiO2 and Fe2O3 nanoparticles at current density of 5 Ag-1.