Molecular methods used to estimate thermal inactivation of a prototype human norovirus: more heat resistant than previously believed?

Two molecular-based methods for estimating capsid integrity as a proxy for virus infectivity were used to produce thermal inactivation profiles of Snow Mountain virus (SMV), a prototype human norovirus (HuNoV). Monodispersed virus suspensions were exposed to 77, 80, 82 and 85 °C for various times, pre-treated with either propidium monoazide (PMA) or RNase, and subjected to RNA isolation followed by RT-qPCR amplification. D-values were 25.6 ± 2.8, 3.1 ± 0.1, 0.7 ± 0.04 and 0.2 ± 0.07 min at 77, 80, 82 and 85 °C, respectively for PMA-treated SMV; and 16.4 ± 0.4, 3.9 ± 0.2 0.9 ± 0.3 and 0.12 ± 0.00 min at 77, 80, 82 and 85 °C, respectively for RNase-treated SMV. Corresponding zD values were 3.80 °C and 3.71 °C for PMA and RNase-treated virus, respectively. Electron microscopy data applied to heat-treated virus-like particles supported this relatively high degree of thermal resistance. The data suggest that SMV is more heat resistant than common cultivable HuNoV surrogates. Standardized thermal inactivation methods (such as milk pasteurization) may not be stringent enough to eliminate this virus and perhaps other HuNoV.

Persistence and transferability of noroviruses on and between common surfaces and foods.

Human noroviruses (HuNoV) are the leading cause of foodborne disease, and poor personal hygiene practices of infected workers are the most common mode of contamination. The purpose of this study was to characterize the persistence and transferability of representative noroviruses Norwalk virus (NV), Snow Mountain virus (SMV), and murine norovirus 1 (MNV-1) on and between solid surfaces and foods. Changes in virus concentration on artificially inoculated solid surfaces (stainless steel, ceramic, and Formica) or lettuce were monitored over a period of 14 to 42 days. Virus transfer was evaluated from donor (solid surface) to recipient (food, e.g., lettuce and sliced turkey deli meat) for up to 2 h postinoculation. Viruses were recovered by elution and titered with reverse transcription quantitative PCR (RT-qPCR) and/or infectivity assay, as appropriate. Based on RTqPCR, the concentration of NV and SMV on surfaces dropped gradually over time, with an average reduction of 1.5 to 2.0 and 1.8 to 2.3 log, respectively, after 42 days, with no statistically significant differences by surface. When inoculated onto lettuce stored for 2 weeks at 4°C and room temperature, the titers of NV and SMV dropped by approximately 1.0 and 1.2 to 1.8 log, respectively. Comparatively, the RT-qPCR signal associated with purified HuNoV RNA placed on the same surfaces was more rapidly lost to degradation. Transfer efficiency ranged from 0 to 26 % for lettuce and from 55 to 95 % for sliced turkey deli meat, with statistically significant differences (P ≤ 0.05) in transferability as a function of contact pressure (100 and 1,000 g/9 cm(2)) and inoculum drying time. When similar experiments were done with MNV-1, infectious virus failed to be detected on solid surfaces after storage day 21, although the virus did persist on lettuce. This study provides much needed quantitative data for use in risk assessment efforts intended to characterize the transmission of HuNoV during food preparation and handling.

Detection and enumeration of Dekkera anomala in beer, cola, and cider using real-time PCR.

AIMS: In this article, a quantitative real-time PCR assay for detection and enumeration of the spoilage yeast Dekkera anomala in beer, cola, apple cider, and brewing wort is presented as an improvement upon existing detection methods, which are very time-consuming and not always accurate. METHODS AND RESULTS: Primers were designed to exclude other organisms common in these beverages, and the assay was linear over 6 log units of cell concentrations. The addition of large amounts of non-target yeast DNA did not affect the efficiency of this assay. A standard curve of known DNA was established by plotting the C(t) values obtained from the QPCR against the log of plate counts on yeast peptone dextrose medium and unknowns showed exceptional correlation when tested against this standard curve. The assay was found to detect D. anomala at levels of 10-14 CFU ml⁻¹ in either cola or beer and at levels of 9·4-25·0 CFU ml⁻¹ in apple cider. The assay was also used to follow the growth of D. anomala in brewing wort. CONCLUSIONS: The results indicate that real-time PCR is an effective tool for rapid, accurate detection and quantitation of D. anomala in beer, cola and apple cider. SIGNIFICANCE AND IMPACT OF THE STUDY: This method gives a faster and more efficient technique to screen beer, cola, and cider samples and reduce spoilage by D. anomala. Faster screening may allow for significant reduction in economic loss because of reduced spoilage.

The presence of Saccharomyces cerevisiae DNA in various media used to propagate yeasts and its removal by ethidium monoazide.

AIMS: In this study we demonstrate the interference of yeast extract in enumeration of Saccharomyces cerevisiae using real-time PCR and develop a method for its removal from the media using ethidium monoazide (EMA). METHODS AND RESULTS: Using real-time PCR and primers to S. cerevisiae we demonstrate the presence of yeast DNA in various media as well as the media impact on S. cerevisiae real-time PCR standard curves. By pretreatment with EMA, we were able to remove this interference. CONCLUSIONS: Saccharomyces cerevisiae DNA can be found in a number of common laboratory media and may impact the enumeration of this yeast by real-time PCR. However, pretreatment with EMA eliminates this concern. SIGNIFICANCE AND IMPACT OF THE STUDY: We have developed a method for removal of contaminating DNA in yeast growth media.

PCR-based method using propidium monoazide to distinguish viable from nonviable Bacillus subtilis spores.

This paper describes a molecular-based method which is able to discriminate between viable and inactivated Bacillus subtilis spores by utilizing the DNA-intercalating dye propidium monoazide. The approach should be valuable in our attempt to employ molecular methods to streamline the evaluation of process validation using bacterial endospores.

Comparative genomics of the lactic acid bacteria.

Lactic acid-producing bacteria are associated with various plant and animal niches and play a key role in the production of fermented foods and beverages. We report nine genome sequences representing the phylogenetic and functional diversity of these bacteria. The small genomes of lactic acid bacteria encode a broad repertoire of transporters for efficient carbon and nitrogen acquisition from the nutritionally rich environments they inhabit and reflect a limited range of biosynthetic capabilities that indicate both prototrophic and auxotrophic strains. Phylogenetic analyses, comparison of gene content across the group, and reconstruction of ancestral gene sets indicate a combination of extensive gene loss and key gene acquisitions via horizontal gene transfer during the coevolution of lactic acid bacteria with their habitats.

Zinc uptake, oxidative stress and the FNR-like proteins of Lactococcus lactis.

Lactococcus lactis ssp. cremoris MG1363 contains two FNR homologues, FlpA and FlpB, encoded by the distal genes of two paralogous operons (orfX(A/B)-orfY(A/B)-flpA/B). An flpA flpB double mutant strain is hypersensitive to hydrogen peroxide and has a depleted intracellular Zn(II) pool. The phenotypes of the flp mutant strains suggest that FlpA and FlpB control the expression of high and low affinity ATP-dependent Zn(II) uptake systems, respectively. Plate tests revealed that expression from a orfX(B)::lac reporter was activated by Cd(II), consistent with other Zn(II)-regulated systems. The link between a failure to acquire Zn(II) and hypersensitivity to oxidative stress suggests that Zn(II) may be required to protect vulnerable protein thiols from oxidation.