ABSTRACT
The study was undertaken to evaluate the biaxial flexural strength, biaxial flexural strength after etching with 9 % HF acid and fracture toughness of three commonly used pressable all ceramic core materials. Ninety glass ceramic specimens were fabricated from three commercially available leucite based core ceramic material (1) Esthetic Empress, (2) Cergo, and (3) Performance Plus. Thirty discs of each material were divided into three groups of 10 discs each. Biaxial flexural strength (30 discs,) Biaxial flexural strength for samples treated with 9 % HF acid (30 discs) and fracture toughness (30 discs) were evaluated. Core material Performance Plus had the lowest biaxial strength of 124.89 MPa, Cergo had strength of 152.22 MPa and the highest value of 163.95 was reported for Esthetic Empress. For samples treated 9 % HF, Performance Plus had the lowest biaxial strength of 98.37 MPa, Cergo had strength of 117.42 MPa and the highest value of 143.74 was reported for Esthetic Empress. Core material Performance Plus had the lowest fracture toughness of 1.063 MPa, Cergo had strength of 1.112 MPa and the highest value of 1.225 was reported for Esthetic Empress. The results shows that Esthetic Empress had better mechanical properties compared to Cergo had Performance Plus in relation to the parameters tested.
ABSTRACT
Bone density is a key parameter in determining the surgical procedure of implant placement and for the predictability of successful implant treatment. Several clinical studies have shown lower survival rates of implants in maxilla which was attributed to poor bone quality. The present study compared the variations in the pre-operative and post-operative bone density values in Hounsfield units using CT between drilling technique and bone expansion technique at 0.25 and 1.0 mm sections at two sites which were selected in maxillary arch between the second premolar regions of either quadrants and results have shown bone expansion technique is superior to drilling technique in division III bone.
ABSTRACT
BACKGROUND: Proper gingival retraction improves the prognosis of crowns and bridges with sub gingival finishlines.Use of lasers assists the operator to achieve proper retraction with good clinical results. AIMS: The present study was intended to assess the amount of lateral gingival retraction achieved quantitatively by using diode lasers. SETTINGS AND DESIGN: Study was carried on 20 patients attended to a dental institution that underwent root canal treatment and indicated for fabrication of crowns. MATERIAL AND METHODS: Gingival retraction was carried out on 20 teeth and elastomeric impressions were obtained. Models retrieved from the impressions were sectioned and the lateral distance between finish line and the marginal gingival was measured using tool makers microscope. Retraction was measured in mid buccal, mesio buccal and disto buccal regions. STATISTICAL ANALYSIS: The values obtained were used to calculate the mean lateral retraction in microns. RESULTS: Mean retraction values of 399.5 µm, 445.5 µm and 422.5µm were obtained in mid buccal, mesio buccal and disto buccal regions respectively. CONCLUSIONS: Gingival Retraction achieved was closer to the thickness of sulcular epithelium and greater than the minimum required retraction of 200um.
ABSTRACT
Impression making is not only important but is also the most significant step in the fabrication of any fixed or removable prosthesis. Proper impression making may be hindered by certain pathologic conditions. Reduced mouth opening is one of the common mechanical obstructions for proper orientation of the impression tray in the patient's mouth. In patients with trismus induced by submucous fibrosis, the procedure may be even more difficult to carry out because of reduced tissue resiliency and obliteration of vestibular spaces. Use of sectional trays offers one of the alternatives to overcome the problem of restricted mouth opening. Fabrication of customized impression trays according to the patient dentition improves the accuracy of impression making. The present case reports describe the fabrication of sectional custom trays designed for dentulous patients with chronic tobacco-induced submucous fibrosis.
