Fabricating low cost and high performance elastomer lenses using hanging droplets.

Existing methods for low cost lenses using parallel mold stamping and high temperature reflow requires complex engineering controls to produce high quality lenses. These manufacturing techniques rely on expensive equipment. In this paper, we propose a low cost (< $ 0.01 per pc) flexible moldless lens fabrication method based on curing a hanging transparent polydimethylsiloxane (PDMS) elastomer droplet on a curved substrate. Additional deposition of hanging droplets in the same manner led to a substantial increase in the lens curvature and concomitant decrease in the focal length of the PDMS lenses down to ~2 mm. The shortest focal length lenses were shown to collimate light from a bare light emitting diode (LED) and image microscopic structures down to around 4 µm with 160x magnification. Our hanging droplet lens fabrication technique heralds a new paradigm in the manufacture of low cost, high performance optical lenses for the masses. Using these lenses, we were able to transform an ordinary commercial smartphone camera into a low-cost digital dermascope (60x magnification) that can readily visualize microscopic structures on skin such as sweat pores.

The effect of (NH4)2Sx passivation on the (311)A GaAs surface and its use in AlGaAs/GaAs heterostructure devices.

We have studied the efficacy of (NH4)2Sx surface passivation on the (311)A GaAs surface. We report XPS studies of simultaneously-grown (311)A and (100) heterostructures showing that the (NH4)2Sx solution removes surface oxide and sulfidizes both surfaces. Passivation is often characterized using photoluminescence measurements; we show that while (NH4)2Sx treatment gives a 40-60 ×  increase in photoluminescence intensity for the (100) surface, an increase of only 2-3 ×  is obtained for the (311)A surface. A corresponding lack of reproducible improvement in the gate hysteresis of (311)A heterostructure transistor devices made with the passivation treatment performed immediately prior to gate deposition is also found. We discuss possible reasons why sulfur passivation is ineffective for (311)A GaAs, and propose alternative strategies for passivation of this surface.

Parameter exploration of optically trapped liquid aerosols.

When studying the motion of optically trapped particles on the microsecond time scale, in low-viscosity media such as air, inertia cannot be neglected. Resolution of unusual and interesting behavior not seen in colloidal trapping experiments is possible. In an attempt to explain the phenomena we use power-spectral methods to perform a parameter study of the Brownian motion of optically trapped liquid aerosol droplets concentrated around the critically damped regime. We present evidence that the system is suitably described by a simple harmonic oscillator model which must include a description of Faxén's correction, but not necessarily frequency dependent hydrodynamic corrections to Stokes' law. We also provide results describing how the system behaves under several variables and discuss the difficulty in decoupling the parameters responsible for the observed behavior. We show that due to the relatively low dynamic viscosity and high trap stiffness, it is easy to transfer between over- and underdamped motion by experimentally altering either trap stiffness or damping. Our results suggest stable aerosol trapping may be achieved in underdamped conditions, but the onset of deleterious optical forces at high trapping powers prevents the probing of the upper stability limits due to Brownian motion.

Optical micromanipulation using supercontinuum Laguerre-Gaussian and Gaussian beams.

We characterize a single beam supercontinuum "white light" trap and determine the trap stiffness in the transverse trapping plane. We realize a holographic white light trapping system using a spatial light modulator, and explore the generation of a dual beam trap and characterize its performance. We also demonstrate optical trapping and rotation of particles using a supercontinuum vortex beam. It is shown that orbital angular momentum can be transferred to spheres trapped in a supercontinuum vortex. Quantified rotation rates are demonstrated.

Optical deflection and sorting of microparticles in a near-field optical geometry.

Near-field optical micromanipulation permits new possibilities for controlled motion of trapped objects. In this work, we report an original geometry for optically deflecting and sorting micro-objects employing a total internal reflection microscope system. A small beam of laser light is delivered off-axis through a total internal reflection objective which creates an elongated evanescent illumination of light at a glass/water interface. Asymmetrical gradient and scattering forces from this light field are seen to deflect and sort polystyrene microparticles within a fluid flow. The speed of the deflected objects is dependent upon their intrinsic properties. We present a finite element method to calculate the optical forces for the evanescent waves. The numerical simulations are in good qualitative agreement with the experimental observations and elucidate features of the particle trajectory. In the size range of 1 microm to 5 microm in diameter, polystyrene spheres were found to be guided on average 2.9 +/- 0.7 faster than silica spheres. The velocity increased by 3.0 +/- 0.5 microms(-1) per microm increase in diameter for polystyrene spheres and 0.7 +/- 0.2 microms(-1) per microm for silica. We employ this size dependence for performing passive optical sorting within a microfluidic chip and is demonstrated in the accompanying video.

Experimental observation of modulation instability and optical spatial soliton arrays in soft condensed matter.

In this Letter we report observations of optically induced self-organization of colloidal arrays in the presence of unpatterned counterpropagating evanescent waves. The colloidal arrays formed along the laser propagation axis are shown to be linked to the breakup of the incident field into optical spatial solitons, the lateral spacing of the arrays being related to modulation instability of the soft condensed matter system.

Efficient silicon light-emitting diodes.

Considerable effort is being expended on the development of efficient silicon light-emitting devices compatible with silicon-based integrated circuit technology. Although several approaches are being explored, all presently suffer from low emission efficiencies, with values in the 0.01-0.1% range regarded as high. Here we report a large increase in silicon light-emitting diode power conversion efficiency to values above 1% near room temperature-close to the values of representative direct bandgap emitters of a little more than a decade ago. Our devices are based on normally weak one- and two-phonon assisted sub-bandgap light-emission processes. Their design takes advantage of the reciprocity between light absorption and emission by maximizing absorption at relevant sub-bandgap wavelengths while reducing the scope for parasitic non-radiative recombination within the diode. Each feature individually is shown to improve the emission efficiency by a factor of ten, which accounts for the improvement by a factor of one hundred on the efficiency of baseline devices.