Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers.

The development of an electronic skin is critical to the realization of artificial intelligence that comes into direct contact with humans, and to biomedical applications such as prosthetic skin. To mimic the tactile sensing properties of natural skin, large arrays of pixel pressure sensors on a flexible and stretchable substrate are required. We demonstrate flexible, capacitive pressure sensors with unprecedented sensitivity and very short response times that can be inexpensively fabricated over large areas by microstructuring of thin films of the biocompatible elastomer polydimethylsiloxane. The pressure sensitivity of the microstructured films far surpassed that exhibited by unstructured elastomeric films of similar thickness, and is tunable by using different microstructures. The microstructured films were integrated into organic field-effect transistors as the dielectric layer, forming a new type of active sensor device with similarly excellent sensitivity and response times.

Recent advances in the chemical synthesis of RNA.

As a consequence largely of recent developments in RNA interference (RNAi) research, the availability of rapid and efficient methods for the chemical synthesis of RNA sequences has become a matter of considerable urgency. This unit is concerned mainly with work that has been carried out, especially in the past decade, on the design of new and improved methods of RNA synthesis. The main criteria for the choice of protecting groups for the 2'-hydroxy functions of the ribonucleoside building blocks, which is arguably the most crucial strategic decision to be made, are discussed. A number of new ether-, acetal-, orthoester-, and ester-based 2'-protecting groups are described and their application, mainly in phosphoramidite-based solid-phase synthesis, is discussed in some detail. Brief consideration is also given to solution-phase RNA synthesis, which may well prove to be of great importance if a systemic drug is developed and multikilogram quantities of synthetic RNA sequences are required.

Water-stable organic transistors and their application in chemical and biological sensors.

The development of low-cost, reliable sensors will rely on devices capable of converting an analyte binding event to an easily read electrical signal. Organic thin-film transistors (OTFTs) are ideal for inexpensive, single-use chemical or biological sensors because of their compatibility with flexible, large-area substrates, simple processing, and highly tunable active layer materials. We have fabricated low-operating voltage OTFTs with a cross-linked polymer gate dielectric, which display stable operation under aqueous conditions over >10(4) electrical cycles using the p-channel semiconductor 5,5'-bis-(7-dodecyl-9H-fluoren-2-yl)-2,2'-bithiophene (DDFTTF). OTFT sensors were demonstrated in aqueous solutions with concentrations as low as parts per billion for trinitrobenzene, methylphosphonic acid, cysteine, and glucose. This work demonstrates of reliable OTFT operation in aqueous media, hence opening new possibilities of chemical and biological sensing with OTFTs.

Perylenediimide nanowires and their use in fabricating field-effect transistors and complementary inverters.

Perylenetetracarboxyldiimide (PTCDI) nanowires self-assembled from commercially available materials are demonstrated as the n-channel semiconductor in organic field-effect transistors (OFETs) and as a building block in high-performance complementary inverters. Devices based on a network of PTCDI nanowires have electron mobilities and current on/off ratios on the order of 10(-2) cm2/Vs and 10(4), respectively. Complementary inverters based on n-channel PTCDI nanowire transistors and p-channel hexathiapentacene (HTP) nanowire OFETs achieved gains as high as 8. These results demonstrate the first example of the use of one-dimensional organic semiconductors in complementary inverters.

Patterning organic single-crystal transistor arrays.

Field-effect transistors made of organic single crystals are ideal for studying the charge transport characteristics of organic semiconductor materials. Their outstanding device performance, relative to that of transistors made of organic thin films, makes them also attractive candidates for electronic applications such as active matrix displays and sensor arrays. These applications require minimal cross-talk between neighbouring devices. In the case of thin film systems, simple patterning of the active semiconductor layer minimizes cross-talk. But when using organic single crystals, the only approach currently available for creating arrays of separate devices is manual selection and placing of individual crystals-a process prohibitive for producing devices at high density and with reasonable throughput. In contrast, inorganic crystals have been grown in extended arrays, and efficient and large-area fabrication of silicon crystalline islands with high mobilities for electronic applications has been reported. Here we describe a method for effectively fabricating large arrays of single crystals of a wide range of organic semiconductor materials directly onto transistor source-drain electrodes. We find that film domains of octadecyltriethoxysilane microcontact-printed onto either clean Si/SiO(2) surfaces or flexible plastic provide control over the nucleation of vapour-grown organic single crystals. This allows us to fabricate large arrays of high-performance organic single-crystal field-effect transistors with mobilities as high as 2.4 cm(2) V(-1) s(-1) and on/off ratios greater than 10(7), and devices on flexible substrates that retain their performance after significant bending. These results suggest that our fabrication approach constitutes a promising step that might ultimately allow us to utilize high-performance organic single-crystal field-effect transistors for large-area electronics applications.

Hexathiapentacene: structure, molecular packing, and thin-film transistors.

In this communication we report the electrical characteristics of hexathiapentacene (HTP) and emphasize the unusual chemical structure and molecular packing. We report field-effect mobilities as high as 0.04 cm2 V-1 s-1 and current on/off ratios of >105. With crystallographic evidence of unusually long S-S bonds compared to normal S-S bonds, we have suggested a unique resonance structure similar to trithiapentalene, which well explains the bonding characteristics of HTP. This work appears to be the first to determine its molecular structure/packing mode and to study its application in organic transistors.

Oligo- and poly-nucleotides: 50 years of chemical synthesis.

It is fifty years since the first chemical synthesis of a dinucleoside phosphate and a dinucleotide with natural 3'-->5'-internucleotide linkages was reported. The main developments in the methodology of oligo- and poly-nucleotide synthesis that have taken place since are described.

Conversion of 2-deoxy-D-ribose into 2-amino-5-(2-deoxy-beta-D-ribofuranosyl)pyridine, 2'-deoxypseudouridine, and other C-(2'-deoxyribonucleosides).

The synthesis of 2-amino-5-(2-deoxy-beta-D-ribofuranosyl)pyridine 2a, 2-amino-5-(2-deoxy-alpha-D-ribofuranosyl)-pyridine 23, 2-amino-5-(2-deoxy-beta-D-ribofuranosyl)-3-methylpyridine 2b, 2-amino-5-(2-deoxy-alpha-D-ribofuranosyl)-3-methylpyridine 29 and 5-(2-deoxy-beta-D-ribofuranosyl)-2,4-dioxopyrimidine [2'-deoxypseudouridine] 30a is described. These C-nucleosides are prepared either from 2-deoxy-3,5-O-(1,1,3,3-tetraisopropyldisiloxan-1,3-diyl)-D-ribofuranose 15 or from 2-deoxy-3,5-O-(1,1,3,3-tetraisopropyldisiloxan-1,3-diyl)-D-ribono-1,4-lactone 16, which are themselves prepared from 2-deoxy-D-ribose 13. The sugar derivatives are first allowed to react with the appropriate 5-lithio-pyridine or 5-lithio-pyrimidine derivatives, which are prepared from 5-bromo-2-(dibenzylamino)pyridine 12a, 5-bromo-2-[bis(4-methoxybenzyl)amino]pyridine 12b, 5-bromo-2-dibenzylamino-3-methylpyridine 25 and 5-bromo-2,4-bis(4-methoxybenzyloxy)pyrimidine 33. The products from the reactions between the lithio-derivatives and the lactol 15 are cyclized under Mitsunobu conditions; the products from the reactions between the lithio-derivatives and the lactone 16 are first reduced with L-Selectride before cyclization, also under Mitsunobu conditions. In all cases, the beta-anomers of the protected C-nucleosides are the predominant products. Finally, the separation of the alpha- and beta-anomers and the removal of all of the protecting groups are described.