Effect of Antioxidants in Medicinal Products on Intestinal Drug Transporters.

The presence of mutagenic and carcinogenic N-nitrosamine impurities in medicinal products poses a safety risk. While incorporating antioxidants in formulations is a potential mitigation strategy, concerns arise regarding their interference with drug absorption by inhibiting intestinal drug transporters. Our study screened thirty antioxidants for inhibitory effects on key intestinal transporters-OATP2B1, P-gp, and BCRP in HEK-293 cells (OATP2B1) or membrane vesicles (P-gp, BCRP) using 3H-estrone sulfate, 3H-N-methyl quinidine, and 3H-CCK8 as substrates, respectively. The screen identified that butylated hydroxyanisole (BHA) and carnosic acid inhibited all three transporters (OATP2B1, P-gp, and BCRP), while ascorbyl palmitate (AP) inhibited OATP2B1 by more than 50%. BHA had IC50 values of 71 ± 20 µM, 206 ± 14 µM, and 182 ± 49 µM for OATP2B1, BCRP, and P-gp, respectively. AP exhibited IC50 values of 23 ± 10 µM for OATP2B1. The potency of AP and BHA was tested with valsartan, an OATP2B1 substrate, and revealed IC50 values of 26 ± 17 µM and 19 ± 11 µM, respectively, in HEK-293-OATP2B1 cells. Comparing IC50 values of AP and BHA with estimated intestinal concentrations suggests an unlikely inhibition of intestinal transporters at clinical concentrations of drugs formulated with antioxidants.

Physiologically Based Biopharmaceutics Modeling (PBBM): Best Practices for Drug Product Quality, Regulatory and Industry Perspectives: 2023 Workshop Summary Report.

Physiologically based biopharmaceutics modeling (PBBM) is used to elevate drug product quality by providing a more accurate and holistic understanding of how drugs interact with the human body. These models are based on the integration of physiological, pharmacological, and pharmaceutical data to simulate and predict drug behavior in vivo. Effective utilization of PBBM requires a consistent approach to model development, verification, validation, and application. Currently, only one country has a draft guidance document for PBBM, whereas other major regulatory authorities have had limited experience with the review of PBBM. To address this gap, industry submitted confidential PBBM case studies to be reviewed by the regulatory agencies; software companies committed to training. PBBM cases were independently and collaboratively discussed by regulators, and academic colleagues participated in some of the discussions. Successful bioequivalence "safe space" industry case examples are also presented. Overall, six regulatory agencies were involved in the case study exercises, including ANVISA, FDA, Health Canada, MHRA, PMDA, and EMA (experts from Belgium, Germany, Norway, Portugal, Spain, and Sweden), and we believe this is the first time such a collaboration has taken place. The outcomes were presented at this workshop, together with a participant survey on the utility and experience with PBBM submissions, to discuss the best scientific practices for developing, validating, and applying PBBMs. The PBBM case studies enabled industry to receive constructive feedback from global regulators and highlighted clear direction for future PBBM submissions for regulatory consideration.

Lack of Effect of Antioxidants on Biopharmaceutics Classification System (BCS) Class III Drug Permeability.

The addition of antioxidants to pharmaceutical products is a potential approach to inhibit nitrosamine formation, particularly in solid oral dosage forms like tablets and capsules. The objective was to assess the effect of ten antioxidants on the permeability of four Biopharmaceutics Classification System (BCS) Class III drugs. Bi-directional drug permeability studies in the absence and presence of antioxidants were performed in vitro across MDCK-II monolayers. No antioxidant increased drug permeability, while the positive control sodium lauryl sulfate always increased drug permeability. Results support that any of the ten antioxidants, up to at least 10 mg, can be added to a solid oral dosage form without modulating passive drug intestinal permeability. Additional considerations are also discussed.

Scientific and Regulatory Considerations in Solid Oral Modified Release Drug Product Development.

This review presents scientific and regulatory considerations for the development of solid oral modified release (MR) drug products. It includes a rationale for patient-focused development based on Quality-by-Design (QbD) principles. Product and process understanding of MR products includes identification and risk-based evaluation of critical material attributes (CMAs), critical process parameters (CPPs), and their impact on critical quality attributes (CQAs) that affect the clinical performance. The use of various biopharmaceutics tools that link the CQAs to a predictable and reproducible clinical performance for patient benefit is emphasized. Product and process understanding lead to a more comprehensive control strategy that can maintain product quality through the shelf life and the lifecycle of the drug product. The overall goal is to develop MR products that consistently meet the clinical objectives while mitigating the risks to patients by reducing the probability and increasing the detectability of CQA failures.

Surfactant-mediated dissolution: contributions of solubility enhancement and relatively low micelle diffusivity.

The objective of this study was to assess the contributions of surfactant-mediated solubility and micellar diffusivity on the ability of surfactant to enhance drug dissolution. The following model was derived to predict the degree to which surfactants enhance griseofulvin dissolution: phi = 1 + (fm/ff).((D(D-M)2/3)/(DD2/3)) where phi is the degree of surfactant-mediated dissolution enhancement, fm is the fraction of the drug in micelle, and ff is the fraction of free drug, and DD and D(D-M) are the diffusivities of free drug and drug-loaded micelles, respectively. The Wood apparatus was used to measure the dissolution of griseofluvin in the presence of the anionic surfactant sodium dodecyl sulfate (SDS), the cationic surfactant cetyl trimethyl ammonium bromide (CTAB), and the neutral surfactants Tween 80 and Cremophor EL. DD was estimated using the Levich equation. D(D-M) was measured using dynamic light scattering. Griseofulvin solubility was evaluated in SDS, CTAB, Tween 80, and Cremophor EL at the surfactant concentrations used in the dissolution studies. DD was 11.0 x 10(-6) cm2/s. D(D-M) was 1.29 x 10(-6) cm2/s, 0.956 x 10(-6) cm2/s, 0.569 x 10(-6) cm2/s, and 0.404 x 10(-6) cm2/s for griseofulvin-loaded micelles of SDS, CTAB, Tween 80, and Cremophor EL, respectively. At the highest surfactant concentrations studied, griseofulvin solubility increased 107-fold, 31-fold, fourfold, and threefold for SDS, CTAB, Tween 80, and Cremophor EL. Dissolution into SDS and CTAB were markedly enhanced, but only about one-third as much as solubility enhancement. Dissolution enhancement in the presence of SDS and CTAB were in excellent agreement with model predicted values, with prediction error less than 12%. The model predicted dissolution into Tween 80 and Cremophor EL to be minimally enhanced, as was observed, although the model underpredicted dissolution into these two neutral surfactants. The derived model predicted surfactant-mediated dissolution and reflects dissolution enhancement to be promoted by surfactant-enhanced solubility, but limited by the relatively slow diffusion of drug-loaded surfactant micelles.

Effects of nonionic surfactants on membrane transporters in Caco-2 cell monolayers.

The objectives of this study were (1) to investigate the transporter inhibition activity of three nonionic surfactants on P-glycoprotein, the human intestinal peptide transporter, and the monocarboxylic acid transporter in Caco-2 cell monolayers, and (2) to evaluate the role of membrane fluidity and protein kinase C in surfactant-induced transporter inhibition. All three surfactants inhibited P-glycoprotein (P-gp). Over a range from 0 to 1 mM, Tween 80 and Cremophor EL increased apical-to-basolateral permeability (AP-BL) and decreased basolateral-to-apical (BL-AP) permeability of the P-gp substrate rhodamine 123. Vitamin E TPGS's effect was equally large, but essentially only reduced the BL-AP permeability of rhodamine 123, and did so at a vitamin E TPGS concentration of only 0.025 mM. These P-gp inhibition effects would appear to be related to these excipients' modulation of membrane fluidity, where Tween 80 and Cremophor EL fluidized cell lipid bilayers, while vitamin E TPGS rigidized lipid bilayers. However, among the three surfactants, only Tween 80 inhibited the peptide transporter, as measured by glycyl sarcosine permeability. Likewise, only Cremophor EL inhibited the monocarboxylic acid transporter, as measured by benzoic acid permeability. Nevertheless, at least one of these three surfactants inhibited each P-gp, the human intestinal peptide transporter, and the monocarboxylic acid transporter. A common functional feature of these three surfactants was their ability to modulate fluidity, although results indicate that even strong membrane fluidity modulation alone was not sufficient to reduce transporter activity. N-octyl glucoside, a nonionic surfactant that did not modulate membrane fluidity, did not affect transporter functioning. Protein kinase C inhibitors failed to affect rhodamine 123 and glycyl sarcosine permeability, suggesting protein kinase C inhibition was not the mechanism of transporter inhibition. These results suggest that surfactants can inhibit multiple transporters but that changes in membrane fluidity may not be a generalized mechanism to reduce transporter activity.

Identification of critical process variables for coating actives onto tablets via statistically designed experiments.

The objective of this work was to identify, using a statistical experimental design, the critical processing variables that affect content uniformity and loading of active agent coated on tablets in a 24" Accela-Cota. United States Pharmacopeia (USP) specifies that the % relative standard deviation (RSD) of drug content within a batch should be less than 6%. A Plackett-Burman experimental design was used to identify the process variables that influence the content uniformity and loading efficiency of the drug in the aqueous-based film coat of the tablets. The process variables investigated were inlet airflow, pan speed, inlet air temperature, coating time, atomization pressure, and fan pressure. Atomization pressure was identified as a major variable with respect to content uniformity (P<0.01). Pan speed and coating duration were also identified as variables significantly affecting content uniformity (P<0.05). Fan pressure was identified as a critical variable affecting recovery (P<<0.01). Temperature also significantly affected recovery (P<0.05). A good correlation was obtained between observed and predicted values for content uniformity (r(2)=0.85) and recovery (r(2)=0.95). It was possible to achieve % RSD less than 6% while maintaining the recovery at 80% or higher.