Direct electron transfer reactions between human ceruloplasmin and electrodes.

In an effort to find conditions favouring bioelectrocatalytic reduction of oxygen by surface-immobilised human ceruloplasmin (Cp), direct electron transfer (DET) reactions between Cp and an extended range of surfaces were considered. Exploiting advances in surface nanotechnology, bare and carbon-nanotube-modified spectrographic graphite electrodes as well as bare, thiol- and gold-nanoparticle-modified gold electrodes were considered, and ellipsometry provided clues as to the amount and form of adsorbed Cp. DET was studied under different conditions by cyclic voltammetry and chronoamperometry. Two Faradaic processes with midpoint potentials of about 400 mV and 700 mV vs. NHE, corresponding to the redox transformation of copper sites of Cp, were clearly observed. In spite of the significant amount of Cp adsorbed on the electrode surfaces, as well as the quite fast DET reactions between the redox enzyme and electrodes, bioelectrocatalytic reduction of oxygen by immobilised Cp was never registered. The bioelectrocatalytic inertness of this complex multi-functional redox enzyme interacting with a variety of surfaces might be associated with a very complex mechanism of intramolecular electron transfer involving a kinetic trapping behaviour.

Analysis of triazines and associated metabolites with electrospray ionization field-asymmetric ion mobility spectrometry/mass spectrometry.

Triazines comprise an important pollutant class owing to continued use in certain countries, and owing to strong environmental persistence that leads to problems even in countries like Sweden where the use of triazines has been prohibited for some years. We investigated mass-selective detection for analysis of triazines. More specifically, we studied the background reduction and sensitivity enhancement that result from the use of a new interface technique, field-asymmetric ion mobility spectrometry (FAIMS), in conjunction with electrospray ionization ion-trap mass spectrometry. This technique allows for ion sorting and discrimination against the considerable "chemical noise", nonspecific cluster and fragment ions, which are typically generated in electrospray ionization. This paper presents results of a pilot study of triazines and some metabolites in ideal solvents. Our long-range goal is automated analysis with mass-selective detection coupled to membrane-based sample cleanup and enrichment for additional enhancement in sensitivity.

Terbutaline enantiomer separation and quantification by complexation and field asymmetric ion mobility spectrometry-tandem mass spectrometry.

Recently, we introduced a new approach to chiral separation and analysis of amino acids by chiral complexation and electrospray high-field asymmetric waveform ion mobility spectrometry coupled to mass spectrometry (ESI-FAIMS-MS). In the present work, we extended this approach to the separation of the drug compound terbutaline. Terbutaline enantiomers were complexed with metal ions and an amino acid to form diastereomeric complexes of the type [M(II)(L-Ref)2((+)/(-)-A)-H](+), where M(II) is a divalent metal ion, L-Ref is an amino acid in its L-form, and A is the terbutaline analyte. When metal and reference compound were suitably chosen, these complexes were separable by FAIMS. We also detected and characterized larger clusters that were transmitted at distinct FAIMS compensation voltages (CV), disturbing data analysis by disintegrating after the FAIMS separation and forming complexes of the same composition [M(II)(L-Ref)2((+)/(-)-A)-H](+), thus giving rise to additional peaks in the FAIMS CV spectra. This undesired phenomenon could be largely avoided by adjusting the mass spectrometer skimmer voltages in such a way that said larger clusters remained intact. In the quantitative part of the present work, we achieved a limit of detection of 0.10% (-)-terbutaline in a sample of (+)-terbutaline. The limit of detection and analysis time per sample compared favorably to literature values for chiral terbutaline separation by HPLC and CE.

Electrospray ionization mass spectrometry in enzymology: uncovering the mechanisms of two-substrate reactions.

The purpose of this review is to draw attention to the use of electrospray ionization mass spectrometry (ESI-MS) for monitoring the course of enzyme-substrate interactions, in the particular case of complex systems in which two substrates participate. The determination and characterization of intra-molecular reactions, especially those that occur in the enzyme active site, is not a trivial task in chemical kinetics, typically requiring long measurement times and relatively expensive techniques such as nuclear magnetic resonance (NMR), X-ray crystallography or electron microscopy (EM). However, nowadays almost all laboratories are equipped with or else have access to the ESI-MS technique. The aim of this review is to focus on the possibilities of employing even quite simple MS equipment to tackle different applications in studies of complex enzymatic systems.

Enantiomer separation of amino acids by complexation with chiral reference compounds and high-field asymmetric waveform ion mobility spectrometry: preliminary results and possible limitations.

We present a new method for separation of enantiomers with high-field asymmetric waveform ion mobility spectrometry (FAIMS), coupled to mass spectrometric detection. Upon addition of an appropriate chiral reference compound to the analyte solution and subsequent ionization of the solution by electrospray ionization, analyte enantiomers formed diastereomeric complexes, which were potentially separable by FAIMS. The methodology being developed is intended to be general, but here amino acid analytes are specifically considered. In the examples presented herein, six pairs of amino acid enantiomers were successfully separated as metal-bound trimeric complexes of the form [MII(L-Ref)2(D/L-A)-H]+, where MII is a divalent metal ion, L-Ref is an amino acid in its L form acting as chiral reference compound, and A is the amino acid analyte. For example, D- and L-tryptophan were separated in FAIMS as [NiII(L-Asn)2(D-Trp)-H]+ and [NiII(L-Asn)2(L-Trp)-H]+. As FAIMS separation typically takes place over a time scale of only a few hundred milliseconds, the presented separation method opens new possibilities for rapid analysis of one analyte enantiomer in the presence of the other enantiomer. Preliminary quantification results are presented, which suggest that fast and sensitive quantitative chiral analyses can be performed with FAIMS. Method limitations are discussed in terms of diverse phenomena, which are not yet understood.

Characterization of two new multiforms of Trametes pubescens laccase.

Electrochemical properties of two multiforms of laccase from Trametes pubescens basidiomycete (LAC1 and LAC2) have been studied. The standard redox potentials of the T1 sites of the enzymes were found to be 746 and 738 mV vs. NHE for LAC1 and LAC2, respectively. Bioelectroreduction of oxygen based on direct electron transfer between each of the two forms of Trametes pubescens laccase and spectrographic graphite electrodes has been demonstrated and studied. It is concluded that the T1 site of laccase is the first electron acceptor, both in solution (homogeneous case) and when the enzymes are adsorbed on the surface of the graphite electrode (heterogeneous case). Thus, the previously proposed mechanism of oxygen bioelectroreduction by adsorbed fungal laccase was additionally confirmed using two forms of the enzyme. Moreover, the assumed need for extracellular laccase to communicate directly and electronically with a solid matrix (lignin) in the course of lignin degradation is discussed. In summary, the possible roles of multiforms of the enzyme based on their electrochemical, biochemical, spectral, and kinetic properties have been suggested to consist in broadening of the substrate specificity of the enzyme, in turn yielding the possibility to dynamically regulate the process of lignin degradation according to the real-time survival needs of the organism.

Extraction and preconcentration of salbutamol and terbutaline from aqueous samples using hollow fiber supported liquid membrane containing anionic carrier.

This paper presents a new three-phase liquid-phase microextraction (LPME) strategy for extraction and preconcentration of salbutamol (SB) and terbutaline (TB) from aqueous samples, including urine. The drugs were extracted from 11 ml of aqueous sample (source phase; SP) into an organic phase with microliter volume located inside the pores of a polypropylene hollow fiber, and then back-extracted into 24 microl of a second aqueous solution as the receiving phase (RP), located in the lumen of the hollow fiber. In preliminary experiments, we tried to transport the drugs using a pH gradient between the two sides of the hollow fiber. Due to the existence of both amine and phenolic groups on the drugs, very little transport occurred and enrichment factors (EF) less than one were obtained. Further experiments were done in the presence of bis(2-ethylhexyl) monohydrogenphosphoric acid (D2EHPA) or methyltrioctylammonium chloride (Aliquat 336) in the organic phase, to extract drugs from acidic and basic matrices, respectively. Results showed that transport of drugs from alkaline solution into 1M of sodium bromide occurred when the membrane was impregnated with dihexyl ether containing 20% Aliquat 336. To optimize the EF, the effects of different parameters such as the nature of organic solvent used to impregnate the membrane, compositions and volumes of SP and RP, type and concentration of carrier, extraction time and stirring rate were investigated. Optimal results were obtained in the presence of 0.005 M of NaOH (pH 11.70) in the SP, 1M of NaBr in the RP, 20% of Aliquat 336 in dihexyl ether as membrane impregnation solvent, stirring rate of 500 rpm and extraction time of 60 min. Under these conditions, enrichment factors of 52.9 and 213.1, dynamic linear ranges of 20-5000 and 10-5000, and limits of detection of 2.5 and 0.5 ng/ml were obtained for salbutamol and terbutaline, respectively. Also determination of drugs in environmental water and urine samples in the range of nanograms per millilitre with RSDs<10% was possible using HPLC-photodiode array detection or HPLC-MS.

Autoreduction and aggregation of fungal laccase in solution phase: possible correlation with a resting form of laccase.

This paper reports results of a reexamination of some poorly understood peculiarities of laccases, an enzyme family which has been extensively studied in our laboratories as well as by others for some years. The issue that is reconsidered here is the previously proposed existence of "active" and "resting" forms of laccases. The presence of fungal laccases with partly reduced active sites is demonstrated. Of further interest is that an aggregated state in solution, not to our knowledge previously noted for laccase, has been found by using small-angle X-ray scattering as well as thorough analysis of the results of several biochemical experiments. Under some conditions, this aggregated state may correlate with the resting form of the laccases, although this resting form could have a broader significance. It was shown that Trametes ochracea laccase had some anomalous characteristics, which could be correlated with the high concentration of the "resting" enzyme. The mechanism of formation of resting laccase is suggested. Knowledge of the resting state is of importance for in vitro studies. Additionally, a suggestion about the possible regulatory role of this form in vivo is mentioned.

Metallation of the transition-state inhibitor N-methyl mesoporphyrin by ferrochelatase: implications for the catalytic reaction mechanism.

Insertion of metals into various tetrapyrroles is catalysed by a group of enzymes called chelatases, e.g. nickel, cobalt, magnesium and ferro-chelatase. It has been proposed that catalytic metallation includes distorting the porphyrin substrate by the enzyme towards a transition state-like geometry in which at least one of the pyrrole rings will be available for metal chelation. Here, we present a study of metal insertion into the transition-state inhibitor of protoporphyrin IX ferrochelatase, N-methyl mesoporphyrin (N-MeMP), by time-resolved crystallography and mass spectrometry with and without the presence of ferrochelatase. The results show that metallation of N-MeMP has a very limited effect on the conformation of the residues that participate in porphyrin and metal binding. These findings support theoretical data, which indicate that product release is controlled largely by the strain created by metal insertion into the distorted porphyrin. The results suggest that, similar to non-catalytic metallation of N-MeMP, the ferrochelatase-assisted metallation depends on the ligand exchange rate for the respective metal. Moreover, ferrochelatase catalyses insertion of Cu(II) and Zn(II) into N-MeMP with a rate that is about 20 times faster than non-enzymatic metallation in solution, suggesting that the catalytic strategy of ferrochelatase includes a stage of acceleration of the rate of ligand exchange for the metal substrate. The greater efficiency of N-MeMP metallation by Cu(II), as compared to Zn(II), contrasts with the K(m) values for Zn(II) (17 microM) and Cu(II) (170 microM) obtained for metallation of protoporphyrin IX. We suggest that this difference in metal specificity depends on the type of distortion imposed by the enzyme on protoporphyrin IX, which is different from the intrinsic non-planar distortion of N-MeMP. A mechanism of control of metal specificity by porphyrin distortion may be general for different chelatases, and may have common features with the mechanism of metal specificity in crown ethers.

Microchip immobilized enzyme reactors for hydrolysis of methyl cellulose.

Microchip immobilized enzyme reactors (microIMERs) with immobilized endoglucanases were applied for the hydrolysis of methyl cellulose (MC). MCs of various molecular weights were hydrolyzed using two microIMERs containing immobilized celloendoglucanase Cel 5A from Bacillus agaradhaerens (BaCel 5A) connected in series. Hydrolysis by the microIMER could be confirmed from the average molar masses and molar mass distributions measured by size exclusion chromatography (SEC) with online multiangle light scattering and refractive index detection. Methylated cellooligosaccharides with degrees of polymerization (DP) between 1 and 6 formed during hydrolysis were analyzed by direct infusion electrospray ionization ion-trap mass spectrometry (ESI-ITMS). Mass spectra of microIMER- and batch-hydrolyzed samples were compared and no significant differences were found, indicating that microIMER hydrolysis was as efficient as conventional batch hydrolysis. A fast and automated hydrolysis with online MS detection was achieved by connecting the microIMER to high-performance liquid chromatography and ESI-ITMS. This online separation reduced the relative intensities of interfering signals and increased the signal-to-noise ratios in MS. The microIMER hydrolysates were also subjected to SEC interfaced with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. With this technique, oligomers with DP 3-30 could be detected. The hydrolysis by the microIMER was performed within 60 min, i.e. significantly faster compared with batch hydrolysis usually performed for at least 24 h. The microIMER also allowed hydrolysis after 10 days of continuous use. The method presented in this work offers new approaches for the analysis of derivatized cellulose and provides the possibility of convenient online, fast, and more versatile analysis compared with the traditional batch method.