Optimal follow-up schedule for patients taking PCSK9 monoclonal antibodies in a health system: Analysis of specialty pharmacy clinical interventions.

PURPOSE: The objective of this study was to determine if and when it is clinically appropriate to consider a reduction in the frequency of health-system specialty pharmacy (HSSP) clinical pharmacist assessments for patients taking a proprotein convertase subtilisin/kexin type 9 (PCSK9) monoclonal antibody (mAb) after they are deemed clinically stable on therapy. METHODS: A single-center, retrospective, observational study of adult patients on PCSK9 mAb therapy enrolled in the University of Rochester Specialty Pharmacy Cardiology Patient Management Program was performed between October 24, 2016, and April 30, 2022. The primary outcome was the number of clinical pharmacist interventions per interval within the baseline 12 months compared to 12-month intervals for up to 72 months after initiation of PCSK9 mAb therapy. RESULTS: A total of 368 patients on PCSK9 mAb therapy were included in the study. A significantly lower percentage of patients had more than 2 interventions during the 12- to 24-month interval (24.3%) as compared to the baseline 12-month interval (80.2%) (P < 0.001); this represented a 70% reduction in the chance of a patient requiring more than 2 interventions (relative risk, 0.30; 95% CI, 0.24-0.38). A similar trend was demonstrated in the 24- to 36-month and 36- to 48-month intervals when compared to the first year of therapy. The most commonly documented clinical pharmacist interventions were in the categories of safety (29.2%), effectiveness (28.4%), and adherence (19.9%). CONCLUSION: Patients beyond 1 year of PCSK9 mAb therapy required less clinical pharmacist interventions. Therefore, stable patients receiving a PCSK9 mAb may be considered for less frequent clinical assessments to allow for HSSP growth to nontraditional clinical areas.

Pneumococcal Vaccination Practices in Patients With Multiple Sclerosis Receiving Anti-CD20 Monoclonal Antibodies After Pharmacy and Nursing Collaboration.

BACKGROUND: It is recommended that patients taking immunosuppressive anti-CD20 monoclonal antibodies (mAbs) receive pneumococcal vaccinations before their first dose to ensure optimal immune response. An initial medication use evaluation reviewed adherence to Centers for Disease Control and Prevention (CDC) pneumococcal immunization recommendations at the study site, and room for improvement was identified. The nursing team implemented workflow changes to increase nursing involvement in vaccination coordination, education, tracking, and administration. We sought to evaluate the impact of a nursing intervention on optimal pneumococcal vaccination administration rates in patients receiving anti-CD20 mAbs at a multiple sclerosis (MS) center. METHODS: We performed a single-center, retrospective, pre/post medication use evaluation. Inclusion criteria were older than 18 years with a diagnosis of MS and received their first anti-CD20 mAb infusion at the study site during the preintervention or postintervention time frame. RESULTS: We included 406 and 73 patients in the preintervention and postintervention studies, respectively. The nursing intervention significantly improved the percentage of patients receiving optimal pneumococcal vaccination before their first infusion from 58% to 84% and significantly reduced the number with unknown vaccination status from 17% to 3%. Patients who received optimal follow-up vaccination with 23-valent pneumococcal polysaccharide vaccine after optimal 13-valent pneumococcal conjugate vaccine administration improved from 9% to 56%. CONCLUSIONS: A nursing team intervention improved adherence to CDC pneumococcal immunization recommendations for patients receiving anti-CD20 mAb therapy. This project highlights the value of interdisciplinary team collaboration between health system specialty pharmacies and specialized nursing teams in the care of patients with MS.

Physical and Chemical Stability of Dexamethasone Sodium Phosphate in Intravenous Admixtures Used to Prevent Chemotherapy-Induced Nausea and Vomiting.

Purpose: Dilute intravenous (IV) admixtures of dexamethasone sodium phosphate (DSP) are becoming increasingly used in antiemetic regimens to prevent chemotherapy-induced nausea and vomiting (CINV). Based on its chemical structure and previous studies, DSP is known to be susceptible to hydrolysis and oxidation under certain conditions. There are limited data to directly support the selection of IV diluents, storage conditions, and beyond-use dates for the dilute IV solutions of DSP used in the antiemetic regimens. This study was designed to investigate these parameters. Methods: A stability-indicating high-performance liquid chromatography (HPLC) method was first developed for the analysis of DSP. Commercially available 100 mg/10 mL DSP injection vials were used to prepare the IV admixtures of DSP in 0.9% sodium chloride injection or 5% dextrose injection. The final DSP concentrations were 0.08 or 0.4 mg/mL, which bracketed the range commonly used in antiemetic regimens. These admixtures were packaged in 50-mL polyvinylchloride (PVC) bags and stored at room temperature or under refrigeration for 14 days. Samples from each IV bag underwent visual, pH, and HPLC assessments on days 0, 1, 3, 7, and 14. Results: Immediately after preparation, the IV admixtures of DSP appeared clear, colorless, and free of particulate matters. The initial pH values were 6.4 to 6.8 and 7.0 to 7.8 for samples in 0.9% sodium chloride and 5% dextrose, respectively. The initial DSP concentrations of all samples were within 96% to 100% of the expected values. Over the 14 days of storage at room temperature or refrigeration, no significant change was observed for the visual appearance of any IV bags. The pH of all samples remained within one pH unit from the initial values. The HPLC results confirmed that all samples retained 94% to 100% of original drug concentrations and that no significant degradation products were observed. Conclusions: Intravenous admixtures of DSP at 0.08 to 0.4 mg/mL are compatible with 0.9% sodium chloride and 5% dextrose in PVC bags. These admixtures are also chemically and physically stable when stored at room temperature or under refrigeration for up to 14 days.

An Exploratory Study of Suboxone (Buprenorphine/Naloxone) Film Splitting: Cutting Methods, Content Uniformity, and Stability.

Suboxone films are U.S. Food and Drug Administration approved to treat opioid dependence. While the package insert states that films should not be cut, physicians often prescribe film fractions for treatment and tapering. There is no data to support this practice, and this study was initiated to evaluate cutting methods, content uniformity, and stability of split films. Suboxone 8-mg buprenorphine/2-mg naloxone films were split using four methods: 1) ruler/razor cut, 2) scissor cut, 3) fold/rip, and 4) fold/scissor cut. United States Pharmacopeia Chapter <905> was used to evaluate the weight variation and content uniformity of split films. The stability of split films stored in polybags was evaluated over 7 days. A stability-indicating high-performance liquid chromatography method was used for content uniformity and stability evaluation. The weight variation results were acceptable for the half films from all four cutting methods, but this was not true for the quarter films. The method of ruler/razor cut was determined most favorable and used for the content uniformity test. Based on the high-performance liquid chromatography results, the half films from the ruler/razor cut method met the passing criteria of United States Pharmacopeia Chapter <905> with acceptance values of 9.8 to 10.4 for buprenorphine and 8.4 to 11.5 for naloxone (=15 is considered passing). The stability results indicated that both actives retained >97.7% of initial strength. Four cutting methods were found to be acceptable for splitting Suboxone films into half but not quarter fractions. The half films from the ruler/razor cut method also passed United States Pharmacopeia Chapter <905> content uniformity test. Both actives remained stable for 7 days when the half films were stored in polybags at room temperature.

In Vitro Evaluation of Eslicarbazepine Delivery via Enteral Feeding Tubes.

Purpose: The feasibility of preparing an eslicarbazepine acetate suspension using Aptiom tablets for administration via enteral feeding tubes was evaluated. Methods: Eslicarbazepine acetate suspension (40 mg/mL) was prepared using Aptiom tablets after optimizing the tablet crushing methods and the vehicle composition. A stability-indicating high-performance liquid chromatography (HPLC) method was developed to monitor the eslicarbazepine stability in the prepared suspension. Three enteric feeding tubes of various composition and dimensions were evaluated for the delivery of the suspensions. The suspension was evaluated for the physical and chemical stability for 48 hours. Results: The reproducibility and consistency of particle size reduction was found to be best with standard mortar/pestle. The viscosity analysis and physical stability studies showed that ORA-Plus:water (50:50 v/v) was optimal for suspending ability and flowability of suspension through the tubes. The developed HPLC method was found to be stability indicating and suitable for the assay of eslicarbazepine acetate in the prepared suspension. The eslicarbazepine concentrations in separately prepared suspensions were within acceptable range (±3%), indicating accuracy and reproducibility of the procedure. The eslicarbazepine concentrations in suspensions before and after delivery through the enteric feeding tubes were within acceptable range (±4%), indicating absence of any physical/chemical interactions of eslicarbazepine with the tubes and a successful delivery of eslicarbazepine dosage via enteric feeding tubes. The stability study results showed that eslicarbazepine concentration in the suspension remained unchanged when stored at room temperature for 48 hours. Conclusion: The study presents a convenient procedure for the preparation of a stable suspension of eslicarbazepine acetate (40 mg/mL) using Aptiom tablets, for administration via enteral feeding tubes.