The DIAD Approach to Correlative Synchrotron X-ray Imaging and Diffraction Analysis of Human Enamel.

The Dual Imaging and Diffraction (DIAD) beamline at Diamond Light Source (Didcot, U.K.) implements a correlative approach to the dynamic study of materials based on concurrent analysis of identical sample locations using complementary X-ray modalities to reveal structural detail at various length scales. Namely, the underlying beamline principle and its practical implementation allow the collocation of chosen regions within the sample and their interrogation using real-space imaging (radiography and tomography) and reciprocal space scattering (diffraction). The switching between the two principal modes is made smooth and rapid by design, so that the data collected is interlaced to obtain near-simultaneous multimodal characterization. Different specific photon energies are used for each mode, and the interlacing of acquisition steps allows conducting static and dynamic experiments. Building on the demonstrated realization of this state-of-the-art approach requires further refining of the experimental practice, namely, the methods for gauge volume collocation under different modes of beam-sample interaction. To address this challenge, experiments were conducted at DIAD devoted to the study of human dental enamel, a hierarchical structure composed of hydroxyapatite mineral nanocrystals, as a static sample previously affected by dental caries (tooth decay) as well as under dynamic conditions simulating the process of acid demineralization. Collocation and correlation were achieved between WAXS (wide-angle X-ray scattering), 2D (radiographic), and 3D (tomographic) imaging. While X-ray imaging in 2D or 3D modes reveals real-space details of the sample microstructure, X-ray scattering data for each gauge volume provided statistical nanoscale and ultrastructural polycrystal reciprocal-space information such as phase and preferred orientation (texture). Careful registration of the gauge volume positions recorded during the scans allowed direct covisualization of the data from two modalities. Diffraction gauge volumes were identified and visualized within the tomographic data sets, revealing the underlying local information to support the interpretation of the diffraction patterns. The present implementation of the 4D microscopy paradigm allowed following the progression of demineralization and its correlation with time-dependent WAXS pattern evolution in an approach that is transferable to other material systems.

Flexible positioning of a large area detector using an industrial robot.

The DIAD beamline for Dual Imaging and Diffraction at Diamond Light Source has opted to use an industrial robot to position its Dectris Pilatus 2M CdTe diffraction detector. This setup was chosen to enable flexible positioning of the detector in a quarter-sphere around the sample position whilst reliably holding the large weight of 139 kg of detector, detector mount and cabling in a stable position. Metrology measurements showed that the detector can be positioned with a linear repeatability of <19.7 µm and a rotational repeatability of <16.3 µrad. The detector position stays stable for a 12 h period with <10.1 µm of movement for linear displacement and <3.8 µrad for rotational displacement. X-ray diffraction from calibration samples confirmed that the robot is sufficiently stable to resolve lattice d-spacings within the instrumental broadening given by detector position and beam divergence.

Beamline K11 DIAD: a new instrument for dual imaging and diffraction at Diamond Light Source.

The Dual Imaging and Diffraction (DIAD) beamline at Diamond Light Source is a new dual-beam instrument for full-field imaging/tomography and powder diffraction. This instrument provides the user community with the capability to dynamically image 2D and 3D complex structures and perform phase identification and/or strain mapping using micro-diffraction. The aim is to enable in situ and in operando experiments that require spatially correlated results from both techniques, by providing measurements from the same specimen location quasi-simultaneously. Using an unusual optical layout, DIAD has two independent beams originating from one source that operate in the medium energy range (7-38 keV) and are combined at one sample position. Here, either radiography or tomography can be performed using monochromatic or pink beam, with a 1.4 mm × 1.2 mm field of view and a feature resolution of 1.2 µm. Micro-diffraction is possible with a variable beam size between 13 µm × 4 µm and 50 µm × 50 µm. One key functionality of the beamline is image-guided diffraction, a setup in which the micro-diffraction beam can be scanned over the complete area of the imaging field-of-view. This moving beam setup enables the collection of location-specific information about the phase composition and/or strains at any given position within the image/tomography field of view. The dual beam design allows fast switching between imaging and diffraction mode without the need of complicated and time-consuming mode switches. Real-time selection of areas of interest for diffraction measurements as well as the simultaneous collection of both imaging and diffraction data of (irreversible) in situ and in operando experiments are possible.

A novel molten-salt electrochemical cell for investigating the reduction of uranium dioxide to uranium metal by lithium using in situ synchrotron radiation.

A novel electrochemical cell has been designed and built to allow for in situ energy-dispersive X-ray diffraction measurements to be made during reduction of UO2 to U metal in LiCl-KCl at 500°C. The electrochemical cell contains a recessed well at the bottom of the cell into which the working electrode sits, reducing the beam path for the X-rays through the molten-salt and maximizing the signal-to-noise ratio from the sample. Lithium metal was electrodeposited onto the UO2 working electrode by exposing the working electrode to more negative potentials than the Li deposition potential of the LiCl-KCl eutectic electrolyte. The Li metal acts as a reducing agent for the chemical reduction of UO2 to U, which appears to proceed to completion. All phases were fitted using Le Bail refinement. The cell is expected to be widely applicable to many studies involving molten-salt systems.

Simultaneous Differential Scanning Calorimetry-Synchrotron X-ray Powder Diffraction: A Powerful Technique for Physical Form Characterization in Pharmaceutical Materials.

We report a powerful new technique: hyphenating synchrotron X-ray powder diffraction (XRD) with differential scanning calorimetry (DSC). This is achieved with a simple modification to a standard laboratory DSC instrument, in contrast to previous reports which have involved extensive and complex modifications to a DSC to mount it in the synchrotron beam. The high-energy X-rays of the synchrotron permit the recording of powder diffraction patterns in as little as 2 s, meaning that thermally induced phase changes can be accurately quantified and additional insight on the nature of phase transitions obtained. Such detailed knowledge cannot be gained from existing laboratory XRD instruments, since much longer collection times are required. We demonstrate the power of our approach with two model systems, glutaric acid and sulfathiazole, both of which show enantiotropic polymorphism. The phase transformations between the low and high temperature polymorphs are revealed to be direct solid-solid processes, and sequential refinement against the diffraction patterns obtained permits phase fractions at each temperature to be calculated and unit cell parameters to be accurately quantified as a function of temperature. The combination of XRD and DSC has further allowed us to identify mixtures of phases which appeared phase-pure by DSC.

Phase-Contrast Micro-Computed Tomography Measurements of the Intraocular Pressure-Induced Deformation of the Porcine Lamina Cribrosa.

The lamina cribrosa (LC) is a complex mesh-like tissue in the posterior eye. Its biomechanical environment is thought to play a major role in glaucoma, the second most common cause of blindness. Due to its small size and relative inaccessibility, high-resolution measurements of LC deformation, important in characterizing LC biomechanics, are challenging. Here we present a novel noninvasive imaging method, which enables measurement of the three-dimensional deformation of the LC caused by acute elevation of intraocular pressure (IOP). Posterior segments of porcine eyes were imaged using synchrotron radiation phase contrast micro-computed tomography (PC µCT) at IOPs between 6 and 37 mmHg. The complex trabecular architecture of the LC was reconstructed with an isotropic spatial resolution of 3.2 µm. Scans acquired at different IOPs were analyzed with digital volume correlation (DVC) to compute full-field deformation within the LC. IOP elevation caused substantial tensile, shearing and compressive devformation within the LC, with maximum tensile strains at 30 mmHg averaging 5.5%, and compressive strains reaching 20%. We conclude that PC µCT provides a novel high-resolution method for imaging the LC, and when combined with DVC, allows for full-field 3D measurement of ex vivo LC biomechanics at high spatial resolution.

I12: the Joint Engineering, Environment and Processing (JEEP) beamline at Diamond Light Source.

I12 is the Joint Engineering, Environmental and Processing (JEEP) beamline, constructed during Phase II of the Diamond Light Source. I12 is located on a short (5 m) straight section of the Diamond storage ring and uses a 4.2 T superconducting wiggler to provide polychromatic and monochromatic X-rays in the energy range 50-150 keV. The beam energy enables good penetration through large or dense samples, combined with a large beam size (1 mrad horizontally × 0.3 mrad vertically). The beam characteristics permit the study of materials and processes inside environmental chambers without unacceptable attenuation of the beam and without the need to use sample sizes which are atypically small for the process under study. X-ray techniques available to users are radiography, tomography, energy-dispersive diffraction, monochromatic and white-beam two-dimensional diffraction/scattering and small-angle X-ray scattering. Since commencing operations in November 2009, I12 has established a broad user community in materials science and processing, chemical processing, biomedical engineering, civil engineering, environmental science, palaeontology and physics.

Flow cytometry protocols for surface and intracellular antigen analyses of neural cell types.

Flow cytometry has been extensively used to define cell populations in immunology, hematology and oncology. Here, we provide a detailed description of protocols for flow cytometric analysis of the cluster of differentiation (CD) surface antigens and intracellular antigens in neural cell types. Our step-by-step description of the methodological procedures include: the harvesting of neural in vitro cultures, an optional carboxyfluorescein succinimidyl ester (CFSE)-labeling step, followed by surface antigen staining with conjugated CD antibodies (e.g., CD24, CD54), and subsequent intracellar antigen detection via primary/secondary antibodies or fluorescently labeled Fab fragments (Zenon labeling). The video demonstrates the most critical steps. Moreover, principles of experimental planning, the inclusion of critical controls, and fundamentals of flow cytometric analysis (identification of target population and exclusion of debris; gating strategy; compensation for spectral overlap) are briefly explained in order to enable neurobiologists with limited prior knowledge or specific training in flow cytometry to assess its utility and to better exploit this powerful methodology.

Reliable method for calculating the center of rotation in parallel-beam tomography.

High-throughput processing of parallel-beam X-ray tomography at synchrotron facilities is lacking a reliable and robust method to determine the center of rotation in an automated fashion, i.e. without the need for a human scorer. Well-known techniques based on center of mass calculation, image registration, or reconstruction evaluation work well under favourable conditions but they fail in cases where samples are larger than field of view, when the projections show low signal-to-noise, or when optical defects dominate the contrast. Here we propose an alternative technique which is based on the Fourier analysis of the sinogram. Our technique shows excellent performance particularly on challenging data.

A novel high-temperature furnace for combined in situ synchrotron X-ray diffraction and infrared thermal imaging to investigate the effects of thermal gradients upon the structure of ceramic materials.

A new technique combining in situ X-ray diffraction using synchrotron radiation and infrared thermal imaging is reported. The technique enables the application, generation and measurement of significant thermal gradients, and furthermore allows the direct spatial correlation of thermal and crystallographic measurements. The design and implementation of a novel furnace enabling the simultaneous thermal and X-ray measurements is described. The technique is expected to have wide applicability in material science and engineering; here it has been applied to the study of solid oxide fuel cells at high temperature.

Ammonia-rich high-temperature superconducting intercalates of iron selenide revealed through time-resolved in situ X-ray and neutron diffraction.

The development of a technique for following in situ the reactions of solids with alkali metal/ammonia solutions, using time-resolved X-ray diffraction methods, reveals high-temperature superconducting ammonia-rich intercalates of iron selenide which reversibly absorb and desorb ammonia around ambient temperatures.

Complete elliptical ring geometry provides energy and instrument calibration for synchrotron-based two-dimensional X-ray diffraction.

A complete calibration method to characterize a static planar two-dimensional detector for use in X-ray diffraction at an arbitrary wavelength is described. This method is based upon geometry describing the point of intersection between a cone's axis and its elliptical conic section. This point of intersection is neither the ellipse centre nor one of the ellipse focal points, but some other point which lies in between. The presented solution is closed form, algebraic and non-iterative in its application, and gives values for the X-ray beam energy, the sample-to-detector distance, the location of the beam centre on the detector surface and the detector tilt relative to the incident beam. Previous techniques have tended to require prior knowledge of either the X-ray beam energy or the sample-to-detector distance, whilst other techniques have been iterative. The new calibration procedure is performed by collecting diffraction data, in the form of diffraction rings from a powder standard, at known displacements of the detector along the beam path.

Aminoacylase 1 deficiency associated with autistic behavior.

Aminoacylase 1 (ACY1) deficiency is a recently described inborn error of metabolism. Most of the patients reported so far have presented with rather heterogeneous neurologic symptoms. At this moment, it is not clear whether ACY1 deficiency represents a true metabolic disease with a causal relationship between the enzyme defect and the clinical phenotype or merely a biochemical abnormality. Here we present a patient identified in the course of selective screening for inborn errors of metabolism (IEM). The patient was diagnosed with autistic syndrome and admitted to the Children's Memorial Health Institute (CMHI) for metabolic evaluation. Organic acid analysis using gas chromatography-mass spectrometry (GC-MS) revealed increased urinary excretion of several N-acetylated amino acids, including the derivatives of methionine, glutamic acid, alanine, glycine, leucine, isoleucine, and valine. In Epstein-Barr virus (EBV)-transformed lymphoblasts, ACY1 activity was deficient. The mutation analysis showed a homozygous c.1057C>T transition, predicting a p.Arg353Cys substitution. Both parents were heterozygous for the mutation and had normal results in the organic acid analysis using GC-MS. This article reports the findings of an ACY1-deficient patient presenting with autistic features.

Deletions and point mutations of LRRC50 cause primary ciliary dyskinesia due to dynein arm defects.

Genetic defects affecting motility of cilia and flagella cause chronic destructive airway disease, randomization of left-right body asymmetry, and, frequently, male infertility in primary ciliary dyskinesia (PCD). The most frequent defects involve outer and inner dynein arms (ODAs and IDAs) that are large multiprotein complexes responsible for cilia-beat generation and regulation, respectively. Here, we demonstrate that large genomic deletions, as well as point mutations involving LRRC50, are responsible for a distinct PCD variant that is characterized by a combined defect involving assembly of the ODAs and IDAs. Functional analyses showed that LRRC50 deficiency disrupts assembly of distally and proximally DNAH5- and DNAI2-containing ODA complexes, as well as DNALI1-containing IDA complexes, resulting in immotile cilia. On the basis of these findings, we assume that LRRC50 plays a role in assembly of distinct dynein-arm complexes.

An improved and highly standardised transformation procedure allows efficient production of single and multiple targeted gene-knockouts in a moss, Physcomitrella patens.

The moss Physcomitrella patens is the only land plant known to date with highly efficient homologous recombination in its nuclear DNA, making it a unique model for plant functional genomics approaches. For high-throughput production of knockout plants, a robust transformation system based on polyethylene glycol-mediated transfection of protoplasts was developed and optimised. Both the DNA conformation and pre-culture of plants used for protoplast isolation significantly affected transformation efficiencies. Employing a newly developed PCR high-throughput method, the gene-targeting efficiency in more than 1000 plants transformed with different cDNA-based knockout constructs was determined and analysed with regard to the length and intron/exon structure of the homologous gene locus. Different targeting constructs, each containing an identical selectable marker gene, were applied as batch DNA in a single transformation experiment and resulted in double-knockout plants. Thus, the fast and efficient generation of multiple targeted gene-knockouts is now feasible in Physcomitrella.

Hyperplastic and Tumorous Lesions of the Adrenals in an Unselected Autopsy Series.

In an unselected consecutive postmortem series, 512% of the adrenals showed cortical nodules with diameters up to 1 mm in 13%, between 1 and 2 mm in 28% and < 2 mm in 12%. In 22% of cases only one nodule was present; whereas in 15% two nodules and in 17% more than three nodules were found. A cortical adenoma was detected in 5% of cases. Adenomas were smaller than 6 mm in 1% and < 15 mm also in 1% of the entire collection. For differentiation of nodules criteria listed in Table 4 were used. Correlation with clinical data revealed a significantly higher number of nodules and an adenoma more frequently in hypertensive patients. Metastases were found in 19% of all cases with malignant tumors. Twenty-three percent of the metastases were smaller than 1 mm and 20% were < 10 mm in diameter. Adrenal metastases usually indicated generalized dissemination of the tumor.