Hydrothermal Synthesis and Characterization of Ni-Al Montmorillonite-Like Phyllosilicates.

This work describes the first hydrothermal synthesis in fluoride medium of Ni-Al montmorillonite-like phyllosilicates, in which the only metallic elements in the octahedral sheet are Ni and Al. X-ray diffraction, chemical analysis, thermogravimetric and differential thermal analysis, scanning electron microscopy and transmission electron microscopy confirm that the synthesized samples are montmorillonite-like phyllosilicates having the expected chemical composition. The specific surface areas of the samples are relatively large (>100 m² g-¹) compared to naturally occurring montmorillonites. 29Si and 27Al nuclear magnetic resonance (NMR) indicate substitutions of Al for Si in the tetrahedral sheet. 19F NMR and Ni K-edge extended X-ray absorption fine structure (EXAFS) local probes highlight a clustering of the metal elements and of the vacancies in the octahedral sheet of the samples. These Ni-Al phyllosilicates exhibit a higher local order than in previously synthesized Zn-Al phyllosilicates. Unlike natural montmorillonites, where the distribution of transition metal cations ensures a charge equilibrium allowing a stability of the framework, synthetic montmorillonites entail clustering and instability of the lattice when the content of divalent element in the octahedral sheet exceeds ca. 20%. Synthesis of Ni-Al montmorillonite-like phyllosilicates, was successfully achieved for the first time. These new synthetic materials may find potential applications as catalysts or as materials with magnetic, optical or staining properties.

Cross-linked sulfonated poly(ether ether ketone) by using diamino-organosilicon for proton exchange fuel cells.

Fuel cells are at the battlefront to find alternate sources of energy to the highly polluting, economically and environmentally constraining fossil fuels. This work uses an organosilicon molecule presenting two amine functions, bis(3-aminopropyl)-tetramethyldisiloxane (APTMDS) with the aim of preparing cross-linked sulfonated poly(ether ether ketone) (SPEEK) based membranes. The hybrid membranes obtained at varying APTMDS loadings are characterized for their acid, proton conductivity, water uptake, and swelling properties. APTMDS may be considered as an extreme case of silica nanoparticle and is therefore most advantageously distributed within the polymeric matrix. The two amine groups can interact, via electrostatic interactions, with the sulfonic acid groups of SPEEK, resulting in a double anchoring of the molecule. The addition of a small amount of APTMDS is enhancing the mechanical and hydrolytic properties of the membranes and allows some unfolding of the polymer chains, rendering some acid sites accessible to water molecules and thus available for proton transport.

Amine grafted silica/SPEEK nanocomposites as proton exchange membranes.

This work presents the elaboration of porous silica nanospheres, eventually amine functionalized, which are used as the inorganic filler in mixed matrix silica/SPEEK membranes. The surface of the silica nanoparticles is modified by grafting (3-aminopropyl)dimethylethoxysilane (APDMS). The two sets of nanocomposite membranes obtained at varying silica loadings are characterized for their proton conductivity and water uptake properties. At higher degrees of sulfonation, some cross-linking due to the interaction of the amine groups of the silica with the sulfonic acid groups of the SPEEK polymer is attested by the water uptake reduction between the composites made with amine grafted or pristine silica particles. However, even in these conditions the proton conductivity of the mixed matrix membrane is not essentially different in the two sets of nanocomposites. This indicates that the inorganic filler effect on proton conductivity is related to changes in the microstructure of the water channels in the polymer lattice.

Proton exchange membranes for application in fuel cells: grafted silica/SPEEK nanocomposite elaboration and characterization.

Hydrogen technologies and especially fuel cells are key components in the battle to find alternate sources of energy to the highly polluting and economically constraining fossil fuels in an aim to preserve the environment. The present paper shows the synthesis of surface functionalized silica nanoparticles, which are used to prepare grafted silica/SPEEK nanocomposite membranes. The nanoparticles are grafted either with hexadecylsilyl or aminopropyldimethylsilyl moieties or both. The synthesized particles are analyzed using XRD, NMR, TEM, and DLS to collect information on the nature of the particles and the functional groups, on the particle sizes, and on the hydrophilic/hydrophobic character. The composite membranes prepared using the synthesized particles and two SPEEK polymers with sulfonation degrees of 69.4% and 85.0% are characterized for their proton conductivity and water uptake properties. The corresponding curves are very similar for the composites prepared with both polymers and the nanoparticles bearing the two functional groups. The composites prepared with the nanoparticles bearing solely the aminopropyldimethylsilyl moiety exhibit lower conductivity and water uptake, possibly due to higher interaction of the polymer sulfonic acid sites with the amine groups. The composites prepared with the nanoparticles bearing solely the hexadecylsilyl moiety were not further investigated because of very high particles segregation. A study of the proton conductivity as a function of temperature was performed on selected membranes and showed that nanocomposites made with nanoparticles bearing both functional moieties have a higher conductivity at higher temperatures.

Montmorillonite-poly(ethylene oxide) nanocomposites: interlayer alkali metal behavior.

Clay-PEO nanocomposites can have large electrical conductivities that make them potential electrolyte materials for rechargeable lithium batteries, but the origin of these large conductivities, especially for Li-containing materials, is poorly understood. This paper presents X-ray diffraction (XRD), TGA-DTA, and (7)Li and (23)Na NMR data for PEO nanocomposites made with natural (SWy-1) and synthetic (MNTS) montmorillonite clays that provide new insight into interlayer structure. An increase in basal d(001)-spacings demonstrates successful intercalation of PEO in all samples, and X-ray line narrowing shows that this intercalation improves the layer stacking order. The basal spacings of 17.9-19.4 A are consistent with a helical or bilayer structure of PEO in the interlayer. TGA-DTA provides quantitative results for the hydration state of the nanocomposites, demonstrates PEO intercalation, and shows that the composites prepared from the synthetic montmorillonite are less stable than those made with SWy-1. (7)Li NMR shows that the nearest neighbor hydration state of Li(+) is unaffected by PEO intercalation and suggests weak interaction of Li(+) with PEO. (23)Na NMR shows that PEO intercalation results in the conversion of the multiple Na(+) hydration states observed for the pristine clay into inner sphere sites most likely formed through coordination with the basal oxygens of the clay. These differences between lithium and sodium suggested that tighter binding of the Na to the clay may be the origin of the conductivity of Li-montmorillonite-PEO nanocomposites being as much as 2 orders of magnitude larger than those of Na-montmorillonite-PEO nanocomposites. The results confirm the idea that polymer oxygen atoms do not participate in sequestering the exchangeable cations and agree with the jump process for cation migration advanced by Kuppa and Manias (Kuppa, V.; Manias, E. Chem. Mater. 2002, 14, 2171).