A deep intronic variant in MME causes autosomal recessive Charcot-Marie-Tooth neuropathy through aberrant splicing.

BACKGROUND: Loss-of-function variants in MME (membrane metalloendopeptidase) are a known cause of recessive Charcot-Marie-Tooth Neuropathy (CMT). A deep intronic variant, MME c.1188+428A>G (NM_000902.5), was identified through whole genome sequencing (WGS) of two Australian families with recessive inheritance of axonal CMT using the seqr platform. MME c.1188+428A>G was detected in a homozygous state in Family 1, and in a compound heterozygous state with a known pathogenic MME variant (c.467del; p.Pro156Leufs*14) in Family 2. AIMS: We aimed to determine the pathogenicity of the MME c.1188+428A>G variant through segregation and splicing analysis. METHODS: The splicing impact of the deep intronic MME variant c.1188+428A>G was assessed using an in vitro exon-trapping assay. RESULTS: The exon-trapping assay demonstrated that the MME c.1188+428A>G variant created a novel splice donor site resulting in the inclusion of an 83 bp pseudoexon between MME exons 12 and 13. The incorporation of the pseudoexon into MME transcript is predicted to lead to a coding frameshift and premature termination codon (PTC) in MME exon 14 (p.Ala397ProfsTer47). This PTC is likely to result in nonsense mediated decay (NMD) of MME transcript leading to a pathogenic loss-of-function. INTERPRETATION: To our knowledge, this is the first report of a pathogenic deep intronic MME variant causing CMT. This is of significance as deep intronic variants are missed using whole exome sequencing screening methods. Individuals with CMT should be reassessed for deep intronic variants, with splicing impacts being considered in relation to the potential pathogenicity of variants.

A universal molecular control for DNA, mRNA and protein expression.

The expression of genes encompasses their transcription into mRNA followed by translation into protein. In recent years, next-generation sequencing and mass spectrometry methods have profiled DNA, RNA and protein abundance in cells. However, there are currently no reference standards that are compatible across these genomic, transcriptomic and proteomic methods, and provide an integrated measure of gene expression. Here, we use synthetic biology principles to engineer a multi-omics control, termed pREF, that can act as a universal molecular standard for next-generation sequencing and mass spectrometry methods. The pREF sequence encodes 21 synthetic genes that can be in vitro transcribed into spike-in mRNA controls, and in vitro translated to generate matched protein controls. The synthetic genes provide qualitative controls that can measure sensitivity and quantitative accuracy of DNA, RNA and peptide detection. We demonstrate the use of pREF in metagenome DNA sequencing and RNA sequencing experiments and evaluate the quantification of proteins using mass spectrometry. Unlike previous spike-in controls, pREF can be independently propagated and the synthetic mRNA and protein controls can be sustainably prepared by recipient laboratories using common molecular biology techniques. Together, this provides a universal synthetic standard able to integrate genomic, transcriptomic and proteomic methods.

The landscape of genomic structural variation in Indigenous Australians.

Indigenous Australians harbour rich and unique genomic diversity. However, Aboriginal and Torres Strait Islander ancestries are historically under-represented in genomics research and almost completely missing from reference datasets1-3. Addressing this representation gap is critical, both to advance our understanding of global human genomic diversity and as a prerequisite for ensuring equitable outcomes in genomic medicine. Here we apply population-scale whole-genome long-read sequencing4 to profile genomic structural variation across four remote Indigenous communities. We uncover an abundance of large insertion-deletion variants (20-49 bp; n = 136,797), structural variants (50 b-50 kb; n = 159,912) and regions of variable copy number (>50 kb; n = 156). The majority of variants are composed of tandem repeat or interspersed mobile element sequences (up to 90%) and have not been previously annotated (up to 62%). A large fraction of structural variants appear to be exclusive to Indigenous Australians (12% lower-bound estimate) and most of these are found in only a single community, underscoring the need for broad and deep sampling to achieve a comprehensive catalogue of genomic structural variation across the Australian continent. Finally, we explore short tandem repeats throughout the genome to characterize allelic diversity at 50 known disease loci5, uncover hundreds of novel repeat expansion sites within protein-coding genes, and identify unique patterns of diversity and constraint among short tandem repeat sequences. Our study sheds new light on the dimensions and dynamics of genomic structural variation within and beyond Australia.

Effects of atmospheric low-level jets on the mixing process of a large tropical reservoir.

Changes in the physical and biogeochemical properties of water columns are frequently associated with cold fronts and mesoscale convective systems due to increased cloud cover. The effects of low-level jet (LLJ) events on thermal stratification and water quality, however, remain undescribed, particularly for tropical reservoirs. Here, water temperature time series are combined with meteorological data, LIDAR observations, ERA5 reanalysis data, and hydrodynamical modeling to investigate the impact of an event of LLJ over the Furnas hydropower reservoir in Brazil. The LLJ event was characterized by dry, intense, and persistent winds (~10 m s-1) blowing for more than 12 hours over the main fetch of the reservoir. In the downwind side of the lake, the surface mixed layer depth increased by 50% during the LLJ event. The changes to the water column were produced by a combination of wind-induced upwelling, shear-driven mixing, and nocturnal convective overturning, different from the heat balance expected during passing cold fronts and mesoscale convective systems. The results suggest that both momentum and heat fluxes during LLJ events need to be accounted for in lake modelings to reproduce the vertical mixing process.

Library adaptors with integrated reference controls improve the accuracy and reliability of nanopore sequencing.

Library adaptors are short oligonucleotides that are attached to RNA and DNA samples in preparation for next-generation sequencing (NGS). Adaptors can also include additional functional elements, such as sample indexes and unique molecular identifiers, to improve library analysis. Here, we describe Control Library Adaptors, termed CAPTORs, that measure the accuracy and reliability of NGS. CAPTORs can be integrated within the library preparation of RNA and DNA samples, and their encoded information is retrieved during sequencing. We show how CAPTORs can measure the accuracy of nanopore sequencing, evaluate the quantitative performance of metagenomic and RNA sequencing, and improve normalisation between samples. CAPTORs can also be customised for clinical diagnoses, correcting systematic sequencing errors and improving the diagnosis of pathogenic BRCA1/2 variants in breast cancer. CAPTORs are a simple and effective method to increase the accuracy and reliability of NGS, enabling comparisons between samples, reagents and laboratories, and supporting the use of nanopore sequencing for clinical diagnosis.

Sex-specific transcriptomic and epitranscriptomic signatures of PTSD-like fear acquisition.

Our understanding of the molecular pathology of posttraumatic stress disorder (PTSD) is evolving due to advances in sequencing technologies. With the recent emergence of Oxford Nanopore direct RNA-seq (dRNA-seq), it is now also possible to interrogate diverse RNA modifications, collectively known as the "epitranscriptome.". Here, we present our analyses of the male and female mouse amygdala transcriptome and epitranscriptome, obtained using parallel Illumina RNA-seq and Oxford Nanopore dRNA-seq, associated with the acquisition of PTSD-like fear induced by Pavlovian cued-fear conditioning. We report significant sex-specific differences in the amygdala transcriptional response during fear acquisition and a range of shared and dimorphic epitranscriptomic signatures. Differential RNA modifications are enriched among mRNA transcripts associated with neurotransmitter regulation and mitochondrial function, many of which have been previously implicated in PTSD. Very few differentially modified transcripts are also differentially expressed, suggesting an influential, expression-independent role for epitranscriptional regulation in PTSD-like fear acquisition.

The retroelement Lx9 puts a brake on the immune response to virus infection.

The notion that mobile units of nucleic acid known as transposable elements can operate as genomic controlling elements was put forward over six decades ago1,2. However, it was not until the advancement of genomic sequencing technologies that the abundance and repertoire of transposable elements were revealed, and they are now known to constitute up to two-thirds of mammalian genomes3,4. The presence of DNA regulatory regions including promoters, enhancers and transcription-factor-binding sites within transposable elements5-8 has led to the hypothesis that transposable elements have been co-opted to regulate mammalian gene expression and cell phenotype8-14. Mammalian transposable elements include recent acquisitions and ancient transposable elements that have been maintained in the genome over evolutionary time. The presence of ancient conserved transposable elements correlates positively with the likelihood of a regulatory function, but functional validation remains an essential step to identify transposable element insertions that have a positive effect on fitness. Here we show that CRISPR-Cas9-mediated deletion of a transposable element-namely the LINE-1 retrotransposon Lx9c11-in mice results in an exaggerated and lethal immune response to virus infection. Lx9c11 is critical for the neogenesis of a non-coding RNA (Lx9c11-RegoS) that regulates genes of the Schlafen family, reduces the hyperinflammatory phenotype and rescues lethality in virus-infected Lx9c11-/- mice. These findings provide evidence that a transposable element can control the immune system to favour host survival during virus infection.

Using synthetic chromosome controls to evaluate the sequencing of difficult regions within the human genome.

BACKGROUND: Next-generation sequencing (NGS) can identify mutations in the human genome that cause disease and has been widely adopted in clinical diagnosis. However, the human genome contains many polymorphic, low-complexity, and repetitive regions that are difficult to sequence and analyze. Despite their difficulty, these regions include many clinically important sequences that can inform the treatment of human diseases and improve the diagnostic yield of NGS. RESULTS: To evaluate the accuracy by which these difficult regions are analyzed with NGS, we built an in silico decoy chromosome, along with corresponding synthetic DNA reference controls, that encode difficult and clinically important human genome regions, including repeats, microsatellites, HLA genes, and immune receptors. These controls provide a known ground-truth reference against which to measure the performance of diverse sequencing technologies, reagents, and bioinformatic tools. Using this approach, we provide a comprehensive evaluation of short- and long-read sequencing instruments, library preparation methods, and software tools and identify the errors and systematic bias that confound our resolution of these remaining difficult regions. CONCLUSIONS: This study provides an analytical validation of diagnosis using NGS in difficult regions of the human genome and highlights the challenges that remain to resolve these difficult regions.

Chimeric synthetic reference standards enable cross-validation of positive and negative controls in SARS-CoV-2 molecular tests.

DNA synthesis in vitro has enabled the rapid production of reference standards. These are used as controls, and allow measurement and improvement of the accuracy and quality of diagnostic tests. Current reference standards typically represent target genetic material, and act only as positive controls to assess test sensitivity. However, negative controls are also required to evaluate test specificity. Using a pair of chimeric A/B RNA standards, this allowed incorporation of positive and negative controls into diagnostic testing for the Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2). The chimeric standards constituted target regions for RT-PCR primer/probe sets that are joined in tandem across two separate synthetic molecules. Accordingly, a target region that is present in standard A provides a positive control, whilst being absent in standard B, thereby providing a negative control. This design enables cross-validation of positive and negative controls between the paired standards in the same reaction, with identical conditions. This enables control and test failures to be distinguished, increasing confidence in the accuracy of results. The chimeric A/B standards were assessed using the US Centres for Disease Control real-time RT-PCR protocol, and showed results congruent with other commercial controls in detecting SARS-CoV-2 in patient samples. This chimeric reference standard design approach offers extensive flexibility, allowing representation of diverse genetic features and distantly related sequences, even from different organisms.

A universal and independent synthetic DNA ladder for the quantitative measurement of genomic features.

Standard units of measurement are required for the quantitative description of nature; however, few standard units have been established for genomics to date. Here, we have developed a synthetic DNA ladder that defines a quantitative standard unit that can measure DNA sequence abundance within a next-generation sequencing library. The ladder can be spiked into a DNA sample, and act as an internal scale that measures quantitative genetics features. Unlike previous spike-ins, the ladder is encoded within a single molecule, and can be equivalently and independently synthesized by different laboratories. We show how the ladder can measure diverse quantitative features, including human genetic variation and microbial abundance, and also estimate uncertainty due to technical variation and improve normalization between libraries. This ladder provides an independent quantitative unit that can be used with any organism, application or technology, thereby providing a common metric by which genomes can be measured.

Scanning Magnetic Microscope Using a Gradiometric Configuration for Characterization of Rock Samples.

Scanning magnetic microscopy is a tool that has been used to map magnetic fields with good spatial resolution and field sensitivity. This technology has great advantages over other instruments; for example, its operation does not require cryogenic technology, which reduces its operational cost and complexity. Here, we presented a spatial domain technique based on an equivalent layer approach for processing the data set produced by magnetic microscopy. This approach estimated a magnetic moment distribution over a fictitious layer composed by a set of dipoles located below the observation plane. For this purpose, we formulated a linear inverse problem for calculating the magnetic vector and its amplitude. Vector field maps are valuable tools for the magnetic interpretation of samples with a high spatial variability of magnetization. These maps could provide comprehensive information regarding the spatial distribution of magnetic carriers. In addition, this approach might be useful for characterizing isolated areas over samples or investigating the spatial magnetization distribution of bulk samples at the micro and millimeter scales. This technique could be useful for many applications that require samples that need to be mapped without a magnetic field at room temperature, including rock magnetism.

Use of synthetic DNA spike-in controls (sequins) for human genome sequencing.

Next-generation sequencing (NGS) has been widely adopted to identify genetic variants and investigate their association with disease. However, the analysis of sequencing data remains challenging because of the complexity of human genetic variation and confounding errors introduced during library preparation, sequencing and analysis. We have developed a set of synthetic DNA spike-ins-termed 'sequins' (sequencing spike-ins)-that are directly added to DNA samples before library preparation. Sequins can be used to measure technical biases and to act as internal quantitative and qualitative controls throughout the sequencing workflow. This step-by-step protocol explains the use of sequins for both whole-genome and targeted sequencing of the human genome. This includes instructions regarding the dilution and addition of sequins to human DNA samples, followed by the bioinformatic steps required to separate sequin- and sample-derived sequencing reads and to evaluate the diagnostic performance of the assay. These practical guidelines are accompanied by a broader discussion of the conceptual and statistical principles that underpin the design of sequin standards. This protocol is suitable for users with standard laboratory and bioinformatic experience. The laboratory steps require ~1-4 d and the bioinformatic steps (which can be performed with the provided example data files) take an additional day.

Characterizing Complex Mineral Structures in Thin Sections of Geological Samples with a Scanning Hall Effect Microscope.

We improved a magnetic scanning microscope for measuring the magnetic properties of minerals in thin sections of geological samples at submillimeter scales. The microscope is comprised of a 200 µm diameter Hall sensor that is located at a distance of 142 µm from the sample; an electromagnet capable of applying up to 500 mT DC magnetic fields to the sample over a 40 mm diameter region; a second Hall sensor arranged in a gradiometric configuration to cancel the background signal applied by the electromagnet and reduce the overall noise in the system; a custom-designed electronics system to bias the sensors and allow adjustments to the background signal cancelation; and a scanning XY stage with micrometer resolution. Our system achieves a spatial resolution of 200 µm with a noise at 6.0 Hz of 300 nTrms/(Hz)1/2 in an unshielded environment. The magnetic moment sensitivity is 1.3 × 10-11 Am². We successfully measured the representative magnetization of a geological sample using an alternative model that takes the sample geometry into account and identified different micrometric characteristics in the sample slice.

Gene detection and toxin production evaluation of hemolysin BL of Bacillus cereus isolated from milk and dairy products marketed in Brazil

Bacillus cereusis an ubiquitous, spore-forming bacteria that can survive pasteurization and the majority of the heating processes used in the dairy industry. Besides, it is a pathogen responsible for different types of food poisoning. One type of foodborne disease caused by B.cereusis the diarrheal syndrome, which is caused by the ingestion of vegetative cells producing toxins in the small intestine. One virulence factor for the diarrheal syndrome is the toxin hemolysin BL (HBL), a three-component protein formed by the L1, L2 and B components. In order to evaluate the presence of diarrheal strains isolated from milk and dairy products, 63 B. cereus isolates were obtained from 260 samples of UHT milk, pasteurized milk and powdered milk, sold in commercial establishments and from different brands. The isolates were subjected to the Polymerase Chain Reaction (PCR) for the detection of the encoding genes for the L1, L2 and B components and the toxin production capacity were evaluated with an immunoassay. A total of 23 [36.5%] isolates were identified carrying simultaneously the three tested genes, from which, 20 [86.9%] showed toxigenic capacity. 26 [41.3%] isolates did not carry any of genes tested and the other 14 [22.2%] were positive for one or two of them. The results showed a high toxigenic capacity among the B. cereus isolates able to produce the HBL, indicating a potential risk for consumers.

Gene detection and toxin production evaluation of hemolysin BL of Bacillus cereus isolated from milk and dairy products marketed in Brazil.

Bacillus cereusis an ubiquitous, spore-forming bacteria that can survive pasteurization and the majority of the heating processes used in the dairy industry. Besides, it is a pathogen responsible for different types of food poisoning. One type of foodborne disease caused by B.cereusis the diarrheal syndrome, which is caused by the ingestion of vegetative cells producing toxins in the small intestine. One virulence factor for the diarrheal syndrome is the toxin hemolysin BL (HBL), a three-component protein formed by the L1, L2 and B components. In order to evaluate the presence of diarrheal strains isolated from milk and dairy products, 63 B. cereus isolates were obtained from 260 samples of UHT milk, pasteurized milk and powdered milk, sold in commercial establishments and from different brands. The isolates were subjected to the Polymerase Chain Reaction (PCR) for the detection of the encoding genes for the L1, L2 and B components and the toxin production capacity were evaluated with an immunoassay. A total of 23 [36.5%] isolates were identified carrying simultaneously the three tested genes, from which, 20 [86.9%] showed toxigenic capacity. 26 [41.3%] isolates did not carry any of genes tested and the other 14 [22.2%] were positive for one or two of them. The results showed a high toxigenic capacity among the B. cereus isolates able to produce the HBL, indicating a potential risk for consumers.

Avaliação da atividade antimicrobiana de duas espécies de Rutaceae do Nordeste Brasileiro / Evaluation of the antimicrobial activity of two Rutaceae species from the Brazilian Northeast

Com o aumento da resistência bacteriana aos antibióticos disponíveis, tornou-se imprescindível a busca por novos fármacos ou protótipos. Os metabólitos secundários produzidos por alguns vegetais como cumarinas, alcaloides e terpenoides podem apresentar várias atividades biológicas, dentre elas, atividade antibiótiotica. O objetivo deste trabalho foi avaliar a atividade antimicrobiana in vitro, pelo método de difusão em disco, das diferentes partes de duas espécies pertencentes à família Rutaceae coletadas na Chapada Diamantina, Bahia, Brasil: Spiranthera odoratissima A. St.-Hil. e Zanthoxylum stelligerum Turcz., bem como do alcaloide diidroqueleritrina, isolado do extrato metanólico de Z. stelligerum frente a cepas padrão de microrganismos e isolados clínicos. Os resultados apresentados indicam que o extrato da raiz da espécie Z. stelligerum e o alcaloide extraído desta apresentaram propriedades antimicrobianas contra as cepas Gram positivas e leveduras. A E. coli foi a única cepa Gram negativa que se mostrou sensível ao extrato e ao alcaloide.

With the increase in bacterial resistance to available antibiotics, it became imperative to search for new drugs or prototypes. The secondary metabolites produced by some plants as coumarins, alkaloids and terpenoids have several biological activities, among them, antibiotic activity. The objective of this study was to evaluate the antimicrobial activity in vitro by the disk diffusion method, from different parts of two species belonging to the family Rutaceae, collected in the Chapada Diamantina, Bahia, Brazil: Spiranthera odoratissima A. St Hil. and Zanthoxylum stelligerum Turcz., and the alkaloid dihydrochelerythrine, isolated from the methanolic extract of Z. stelligerum front of standard strains of microorganisms and clinical isolates. The results indicate that the extract from the roots of Z. stelligerum and the alkaloid had antimicrobial properties against Gram positive and yeast strains. The E. coli was the only Gram negative strain that was sensitive to extract and the alkaloid.