Polarity and functionality tailored conjugated microporous polymer coatings on silica microspheres for enhanced pollutant adsorption.

Many sources of pollution that are generated by modern society are not addressable by conventional methods. Especially organic compounds, like pharmaceutics, are particularly hard to remove from waterbodies. Herein, a new approach is presented using conjugated microporous polymers (CMPs) to coat silica microparticles yielding specifically tailored adsorbents. The CMPs are generated with three different monomers: 2,6-dibromonaphthalene (DBN), 2,5-dibromoaniline (DBA) and 2,5-dibromopyridine (DBPN) respectively coupled to 1,3,5-triethynylbenzene (TEB) via Sonogashira coupling. By optimizing the polarity of the silica surface, all three CMPs were converted into microparticle coatings. The resulting hybrid materials feature the advantages of being adjustable in polarity and functionality, as well as morphology. Sedimentation allows facile removal of the coated microparticles after the adsorption. Further, the expansion of the CMP to a thin coating increases the accessible surface area compared to the bulk material. These effects were demonstrated by the adsorption of the model drug diclofenac. Thereby, the aniline-based CMP proved to be most advantageous due to a secondary crosslinking mechanism of amino and alkyne functionalities. An outstanding adsorption capacity of 228 mg diclofenac per gram of the aniline CMP within the hybrid material was achieved. This represents a five-fold increase compared to the value obtained by the pure CMP material underlining the advantages of the hybrid material.

SiO2 nanospheres as surfactant and template in aqueous dispersion polymerizations yielding highly nanoporous resin particles.

HYPOTHESIS: High nitrogen containing resins such as poly(melamine-co-formaldehyde) (PMF) are known for their very good adsorption properties. Until now, using an ecofriendly hard-templating approach with SiO2 nanospheres in water for synthesis, only yielded either highly porous particles with diameters up to 1 µm or non-porous particles with diameters above 1 µm. Small particles cannot be used as fixed bed adsorbents in columns because of the very high pressure occurring. EXPERIMENTS: To yield particles with high porosity and larger diameters for the use as fixed bed adsorbent, we investigated the influence of several synthesis parameters on porosity and particle morphology. FINDINGS: From all variations, we proposed a mechanism for the complex interplay between the PMF prepolymer and resin species with SiO2 nanoparticles acting both as Pickering-like surfactant and template particle. With this knowledge we were able to produce a suitable column material with high specific surface area up to 260 m2/g. We then proved the application of this material for aqueous dichromate adsorption in batch, yielding a maximum capacity of 138 mg/g with recyclability. In column experiments, the contamination of 5 mg/L dichromate in water was reduced to drinking water safe levels for an influent volume equal to over 160 bed volumes.

Tuning the pore structure of templated mesoporous poly(melamine-co-formaldehyde) particles toward diclofenac removal.

The increasing demand and implementation of pharmaceutics poses severe risk to different aquatic species as detectable contaminant in almost every surface water worldwide. Diclofenac (DCF) as one of the most common used analgesics was investigated as contaminant to be removed by adsorption onto nanoporous poly(melamine-co-formaldehyde) (PMF) particles featuring a very high amount of nitrogen functionalities. To achieve a high specific surface area (up to 416 m2/g) and a tunable pore system by hard templating, four different SiO2 nanoparticles were used as template. Differences in the pore formation and achieved pore structure were elucidated. For the first time, the adsorption of DCF onto PMF was tested. In batch adsorption experiments, impactful adsorption capacities as high as 76 µmol/g were achieved and complete removal at initial concentrations of 2 mg/L DCF. Differences in the connectivity and the micropore structure were decisive for uptake in low concentrations and the achieved adsorption capacity, respectively. As the presented PMF particles can be easily synthesized with the monomers formaldehyde and melamine combined with colloidal silica as sacrificial template and water as green solvent, this material presents a viable adsorbent for the removal of DCF at a larger scale. Our study further indicates a high potential for the removal of other pharmaceuticals.

Mesoporous Poly(melamine-co-formaldehyde) Particles for Efficient and Selective Phosphate and Sulfate Removal.

Due to the existence-threatening risk to aquatic life and entire ecosystems, the removal of oxyanions such as sulfate and phosphate from anthropogenic wastewaters, such as municipal effluents and acid mine drainage, is inevitable. Furthermore, phosphorus is an indispensable resource for worldwide plant fertilization, which cannot be replaced by any other substance. This raises phosphate to one of the most important mineral resources worldwide. Thus, efficient recovery of phosphate is essential for ecosystems and the economy. To face the harsh acidic conditions, such as for acid mine drainage, an adsorber material with a high chemical resistivity is beneficial. Poly(melamine-co-formaldehyde) (PMF) sustains these conditions whilst its very high amount of nitrogen functionalities (up to 53.7 wt.%) act as efficient adsorption sides. To increase adsorption capacities, PMF was synthesized in the form of mesoporous particles using a hard-templating approach yielding specific surface areas up to 409 m2/g. Different amounts of silica nanospheres were utilized as template and evaluated for the adsorption of sulfate and phosphate ions. The adsorption isotherms were validated by the Langmuir model. Due to their properties, the PMF particles possessed outperforming maximum adsorption capacities of 341 and 251 mg/g for phosphate and sulfate, respectively. Furthermore, selective adsorption of sulfate from mixed solutions of phosphate and sulfate was found for silica/PMF hybrid particles.

A Complementary and Revised View on the N-Acylation of Chitosan with Hexanoyl Chloride.

The modification of the biobased polymer chitosan is a broad and widely studied field. Herein, an insight into the hydrophobization of low-molecular-weight chitosan by substitution of amino functionalities with hexanoyl chloride is reported. Thereby, the influence of the pH of the reaction media was investigated. Further, methods for the determination of the degree of substitution based on 1H-NMR, FTIR, and potentiometric titration were compared and discussed regarding their accuracy and precision. 1H-NMR was the most accurate method, while FTIR and the potentiometric titration, though precise and reproducible, underlie the influence of complete protonation and solubility issues. Additionally, the impact of the pH variation during the synthesis on the properties of the samples was investigated by Cd2+ sorption experiments. The adjusted pH values during the synthesis and, therefore, the obtained degrees of substitution possessed a strong impact on the adsorption properties of the final material.

Thermoresponsive Catechol Based-Polyelectrolyte Complex Coatings for Controlled Release of Bortezomib.

To overcome the high relapse rate of multiple myeloma (MM), a drug delivery coating for functionalization of bone substitution materials (BSM) is reported based on adhesive, catechol-containing and stimuli-responsive polyelectrolyte complexes (PECs). This system is designed to deliver the MM drug bortezomib (BZM) directly to the anatomical site of action. To establish a gradual BZM release, the naturally occurring caffeic acid (CA) is coupled oxidatively to form poly(caffeic acid) (PCA), which is used as a polyanion for complexation. The catechol functionalities within the PCA are particularly suitable to form esters with the boronic acid group of the BZM, which are then cleaved in the body fluid to administer the drug. To achieve a more thorough control of the release, the thermoresponsive poly(N-isoproplyacrylamide-co-dimethylaminoethylmethacrylate) (P(NIPAM-co-DMAEMA)) was used as a polycation. Using turbidity measurements, it was proven that the lower critical solution temperature (LCST) character of this polymer was transferred to the PECs. Further special temperature dependent attenuated total reflection infrared spectroscopy (ATR-FTIR) showed that coatings formed by PEC immobilization exhibit a similar thermoresponsive performance. By loading the coatings with BZM and studying the release in a model system, via UV/Vis it was observed, that both aims, the retardation and the stimuli control of the release, were achieved.

Switchable Release of Bone Morphogenetic Protein from Thermoresponsive Poly(NIPAM-co-DMAEMA)/Cellulose Sulfate Particle Coatings.

Thermoresponsive coatings of poly(N-isopropylacrylamide-co-DMAEMA)/cellulose sulfate (PNIPAM-DMAEMA/CS) complexes are reported eluting bone-morphogenetic-protein-2 (BMP-2) on demand relevant for implant assisted local bone healing. PNIPAM-DMAEMA/CS dispersions contained colloid particles with hydrodynamic radii RH = 170⁻288 nm at T = 25 °C shrinking to RH = 74⁻103 nm at T = 60 °C. Obviously, PNIPAM-DMAEMA/CS undergoes volume phase transition (VPT) analogously to pure PNIPAM, when critical VPT temperature (VPTT) is exceeded. Temperature dependent turbidity measurements revealed broad VPT and VPTT 47 °C for PNIPAM-DMAEMA/CS colloid dispersions at pH = 7.0. FTIR spectroscopy on thermoresponsive PNIPAM-DMAEMA/CS particle coatings at germanium model substrates under HEPES buffer indicated both wet-adhesiveness and VPT behavior based on diagnostic band intensity increases with temperature. From respective temperature courses empirical VPTT ≈ 42 °C for PNIPAM-DMAEMA/CS coatings at pH = 7.0 were found, which were comparable to VPTT found for respective dispersions. Finally, the PNIPAM-DMAEMA/CS coatings were loaded with BMP-2 and model protein papain (PAP). Time dependent FTIR spectroscopic measurements showed, that for T = 37 °C there was a relative protein release of ≈30% for PAP and ≈10% for BMP-2 after 24 h, which did not increase further. Heating to T = 42 °C for PAP and to 47 °C for BMP-2 further secondary protein release of ≈20% after 24 h was found, respectively, interesting for clinical applications. BMP-2 eluted even at 47 °C was found to be still biologically active.