Ultrathin CAD-CAM glass-ceramic and composite resin occlusal veneers for the treatment of severe dental erosion: An up to 3-year randomized clinical trial.

STATEMENT OF PROBLEM: Ultrathin bonded posterior occlusal veneers represent a conservative alternative to traditional onlays and complete coverage crowns for the treatment of erosive dental wear. Data regarding the clinical performance of ceramic and composite resin ultrathin occlusal veneers are lacking. PURPOSE: The purpose of this prospective randomized clinical trial was to evaluate the influence of computer-aided design and computer-aided manufacturing (CAD-CAM) restorative material (ceramic versus composite resin) on the clinical performance of ultrathin occlusal veneers bonded to worn posterior teeth. MATERIAL AND METHODS: Eleven participants (mean age, 30.4 years) had their posterior teeth restored with 24 ceramic (e.max CAD) and 36 composite resin (Lava Ultimate) ultrathin occlusal veneers. The material type was assigned randomly. The tooth preparations were trial restoration driven and included immediate dentin sealing (OptiBond FL). The intaglio surfaces of the ceramic restorations were etched with hydrofluoric acid and silanated, and the composite resins were airborne-particle abraded and silanated. The tooth preparations were airborne-particle abraded and etched with phosphoric acid before restoration insertion. All restorations were adhesively luted with preheated composite resin (Filtek Z100). The participants were evaluated according to the modified United States Public Health Service (USPHS) criteria at baseline and then each year for up to 3 years. Survival rates were estimated with time to failure (primary outcome of interest) as the endpoint (scores 4 or 5). RESULTS: No restorations were lost. Five partial failures, in the form of chipping (all scored 4), were observed in the composite resin group (Lava Ultimate). The Kaplan-Meier survival rates were 100% for ceramic and 84.7% (SE 0.065%) for composite resin. Differences between the 2 groups were not statistically significant (P=.124). In the surviving restorations, significant difference (P=.003) was found for surface roughness as restorations in the composite resin group experienced some surface degradation. CONCLUSIONS: The findings of this medium-term clinical trial suggest that ceramic (e.max CAD) and composite resin (Lava Ultimate) CAD-CAM ultrathin occlusal veneers presented statistically comparable performance regardless of the minor partial failures (restorable chipping) observed in the composite resin group. Higher surface degradation was observed in the composite resin group.

Influence of different separating mediums applied on the immediate dentin sealing in the tensile strength of temporary restorations / Influência de diferentes agentes isolantes aplicados sobre o selamento dentinário imediato na resistência à tração de restaurações provisórias

Objective: To evaluate the ability of different separating mediums to prevent adhesion between provisional restorations and hybridized dentin surfaces when used with the Immediate Dentin Sealing technique (IDS). Material and Methods: 120 extracted human teeth ­ 40 premolars and 80 molars ­ were selected to integrate acrylics samples separated into 4 different groups (n=10) according to the separating medium used for IDS protection. Forty samples were made of three teeth mounted in a self-cure acrylic resin block (Jet, Classic, São Paulo, Brazil) arranged side by side, simulating the positioning and proximal contacts present in the dental arch between the second premolar, first molar and second molar. A standard dental preparation for ultra-thin occlusal veneer was performed and complete occlusal dentin exposure was achieved by selective removal of the occlusal enamel with a high-speed conical round burr (Code: 1801.4138 FG, KG Sorensen, Medical Burs Ind. e Com. de Pontas e Brocas Cirúrgicas Ltda, São Paulo, Brazil). Dentin hybridization were performed on the control group and 3 different groups of separating mediums (n=10): PC­commercial provisional separating agent (Pro-V Coat, Bisco, Schaumburg, USA); GG­glycerin gel (K-Y Gel; Johnson & Johnson Industry and Commerce LTDA, São Paulo, Brazil); PJ­petroleum jelly (Rioquímica, São Paulo, Brazil). Provisionalization were manufactured on the prepared teeth. After 2 weeks, the tensile test was performed, and the analysis of the failure pattern was performed by 3D laser confocal microscopy and Scanning Electron Microscopy (SEM). The data were analyzed with the 1-way ANOVA and the Tukey test (α = 0.05). Results: Significantly lower tensile strength values were found for the commercial provisional separating agent (30.39 ± 10.01 N) compared to others (p < 0.05). Conclusion: The commercial provisional separating agent showed greater effectiveness on protecting hybridized dentin against the provisional restorations (AU)

Objetivo: Avaliar a capacidade de diferentes agentes isolantes em prevenir a adesão entre as restaurações provisórias e a superfícies de dentina hibridizadas quando usados com a técnica do Selamento Dentinário Imediato (IDS). Material e Métodos: 120 dentes humanos extraídos - 40 pré-molares e 80 molares - foram selecionados para integrar as amostras de acrílico divididas em 4 grupos diferentes (n = 10) de acordo com o meio de separação usado para proteção IDS. Foram confeccionadas 40 amostras de três dentes montados em um bloco de resina acrílica autopolimerizável (Jet, Classic, São Paulo, Brasil) dispostos lado a lado, simulando o posicionamento e os contatos proximais presentes na arcada dentária entre o segundo pré-molar, primeiro molar e segundo molar. Um preparo dentário padrão para laminado oclusal ultrafino foi realizado e a exposição completa da dentina oclusal foi obtida pela remoção seletiva do esmalte oclusal com uma broca cônica arredondada de alta rotação (Código: 1801.4138 FG, KG Sorensen, Medical Burs Ind. E Com. de Pontas e Brocas Cirúrgicas Ltda, São Paulo, Brasil). A hibridização da dentina foi realizada no grupo controle e em 3 grupos diferentes de agentes isolantes (n = 10): PC - agente de separação provisório comercial (Pro-V Coat, Bisco, Schaumburg, EUA); GG ­ gel de glicerina (K-Y Gel; Johnson & Johnson Industry and Commerce LTDA, São Paulo, Brasil); PJ ­ vaselina (Rioquímica, São Paulo, Brasil). As restaurações provisórias foram fabricadas nos dentes preparados. Após 2 semanas, foi realizado o teste de tração, e a análise do padrão de falha foi realizada por microscopia confocal a laser 3D e Microscopia Eletrônica de Varredura (MEV). Os dados foram analisados com a ANOVA de 1 fator e o teste de Tukey (α = 0,05). Resultados: Valores de resistência à tração significativamente menores foram encontrados para o agente separador provisório comercial (30,39 ± 10,01 N) em comparação com os demais (p < 0,05). Conclusão: O agente separador provisório comercial mostrou maior eficácia para a proteção da dentina hibridizada contra as restaurações provisórias (AU)

Longevity of defective direct restorations treated by minimally invasive techniques or complete replacement in permanent teeth: A systematic review.

OBJECTIVES: This systematic review aimed to verify if there is difference in the longevity of minimally invasive techniques compared to the complete replacement for the treatment of defective direct restorations in permanent teeth. DATA: The data included randomized controlled clinical trials comparing the clinical performance of defective dental restorations treated by a complete replacement technique or minimally invasive techniques on permanent teeth. Evaluation of the risk of bias was performed using the Cochrane Collaboration common scheme for bias and the evidence was qualified using the GRADE tool. SOURCE: A comprehensive search was performed in the electronic databases: PubMed, Scopus, ISI Web of Science, The Cochrane Library, LILACS, BBO, SIGLE, followed by manual search in the reference lists of the included studies, without any restrictions. STUDY SELECTION: From 5554 retrieved studies, 10 met the eligibility criteria and were submitted to data extraction and quality assessment. The repair technique presented similar results to replacement and superior results when compared to sealing. In addition, refurbishment demonstrated to be a useful treatment for localized anatomical form defects. All the studies presented low risk of bias and high quality evidence for repair and refurbishment and moderate for the sealing technique. CONCLUSIONS: The direct restorations treated by the repair, seal and refurbishment techniques did not present a significant difference in clinical longevity in comparison to the replacement technique in permanent teeth with overall moderate quality of evidence. CLINICAL SIGNIFICANCE: The present findings demonstrated that the best treatment for defective restorations is conservative management. The evidence demonstrated here helps and encourages clinicians during the decision-making process. Moreover, it suggests not replacing imperfect restorations, but to managing them in a minimally invasive way, allowing the structure to be preserved.

Peel bond strength and antifungal activity of two soft denture lining materials incorporated with 1% chlorhexidine diacetate.

Two soft denture lining materials (SC-Soft Confort and TS-Trusoft) were investigated with and without the addition of 1.0% of chlorhexidine diacetate (1.0% CHX). To assess peel bond strength, specimens (75×10×6 mm) were submitted to a peel test at 10 mm/min immediately and after 24 h. To evaluate Candida albicans growth inhibition, disc of specimens (10×3 mm) were immersed in a solution with 3×106 CFU/mL of C. albicans, and spectral measurements were made following immersion in MTT solution for 2, 4, and 6 days. The agar diffusion test was performed by investigating the diameters of inhibition zones around the disc of specimens (10×3 mm)after 48 h. Data were submitted to statistical analysis (α=0.05) and the failure modes were visually classified. The incorporation of 1.0% CHX significantly decreased the peel bond strength for TS (p=0.001) and SC (p=0.005) for immediate test and for TS after 24 h (p=0.010), but not for SC. C. albicans growth was decreased for both materials over time (p<0.05). SC presented inhibition zones approximately 2.0 times larger than TS. The incorporation of 1.0% CHX inhibited fungal growth without impairment to the peel bond strength for SC after 24 h.

Longevity of direct and indirect resin composite restorations in permanent posterior teeth: A systematic review and meta-analysis.

OBJECTIVES: The aim of this systematic review and meta-analysis was to assess the differences in clinical performance in direct and indirect resin composite restorations in permanent posterior teeth. SOURCES: PubMed, the Cochrane Library, Web of Science, Scopus, LILACS, BBO, ClinicalTrials.gov and SiGLE were searched without restrictions. STUDY SELECTION: We included randomized clinical trials (RCTs) that compared the clinical performance of direct and indirect resin composite restorations in Class I and Class II cavities in permanent teeth, with at least two years of follow-up. The risk of bias tool suggested by Cochrane Collaboration was used for quality assessment. DATA: After duplicate removal, 912 studies were identified. Twenty fulfilled the inclusion criteria after the abstract screening. Two articles were added after a hand search of the reference list of included studies. After examination, nine RCTs were included in the qualitative analysis and five were considered to have a 'low' risk of bias. The overall risk difference in longevity between direct and indirect resin composite restorations in permanent posterior teeth (p>0.05) at five-year follow-up was 1.494 [0.893-2.500], and regardless of the type of tooth restored, that of molar and premolars was 0.716 [0.177-2.888] at three-year follow-up. CONCLUSIONS: Based on the findings, there was no difference in longevity of direct and indirect resin composite restorations regardless of the type of material and the restored tooth. CLINICAL SIGNIFICANCE: Contemporary dentistry is based on minimally invasive restorations. Any indication of a less conservative technique must have unquestionable advantages. In vitro and in vivo studies reveal contradictory evidence of the clinical performance of direct and indirect resin composite restorations in posterior teeth. Thus this study clarified this doubt.

Simplified treatment of severe dental erosion with ultrathin CAD-CAM composite occlusal veneers and anterior bilaminar veneers.

Restorative treatment for patients with dental erosion requires an analysis of the degree of structural damage. Patients affected by moderate to severe dental erosion are particularly challenging because complex occlusal reconstruction will be needed. Ultrathin bonded occlusal veneers represent a conservative alternative to traditional onlays and complete coverage crowns for the treatment of severe erosion. This article describes a complete mouth rehabilitation with ultrathin computer-aided design and computer-aided manufacturing (CAD-CAM) composite resin occlusal veneers in a patient with a severely eroded dentition. In the maxillary anterior teeth, the bilaminar approach was chosen with lingual composite resin veneers and labial porcelain veneers. The main benefit of this approach is the possibility of using additive adhesive techniques, allowing only strategic reduction of sound dental structure or no preparation.

Influence of oral rehabilitation on the oral health-related quality of life of a child with ectodermal dysplasia.

Ectodermal dysplasia (ED) is a rare congenital hereditary disorder among a group of syndromes characterized by abnormalities of ectodermic structures. The purpose of this report is to compare the oral health-related quality of life (OHRQoL) before and after complete oral rehabilitation of a five-year-old boy with ED. Delivery of upper and lower dentures resulted in immediate improvement of the child's OHRQoL. Although ED affects patients physically and emotionally, the early oral rehabilitation of young patients is crucial to improve their social interaction and restore their speech and masticatory function.

Fracture resistance of weakened teeth restored using accessory glass fiber posts.

This study used differential root weakening to evaluate the fracture resistance of bovine teeth restored using glass fiber posts (with or without accessory glass fiber posts). Fifty bovine mandibular incisors were sectioned 14 mm from the apex, fixed in acrylic resin blocks, and divided into 5 groups: healthy roots with a glass fiber post (Group 1), partially weakened teeth with a glass fiber post (Group 2), partially weakened teeth with a glass fiber post and 2 accessory glass fiber posts (Group 3), extensively weakened teeth with a glass fiber post (Group 4), and extensively weakened teeth with a glass fiber post and 5 accessory glass fiber posts (Group 5). Posts were luted with resin cement, cores were prepared using composite resin, and metallic crowns were cemented. The specimens were stored in distilled water at 37°C for more than 72 hours until the fracture resistance test. Specimens were loaded at 135 degrees relative to the long axis of the tooth at a crosshead speed of 0.5 mm/minute in a universal testing machine. All groups predominantly exhibited favorable failure patterns and there were no statistically significant differences between groups (two-way ANOVA, α = 0.05).

Effect of cement type and water storage time on the push-out bond strength of a glass fiber post.

This study investigated the effects of the cement type and the water storage time on the push-out bond strength of a glass fiber post. Glass fiber posts (Fibrekor, Jeneric Pentron) were luted to post spaces using a self-cured resin cement (C&B Cement [CB]), a glass ionomer cement (Ketac Cem [KC]) or a resin-modified glass ionomer cement (GC FujiCEM [FC]) according to the manufacturers' instructions. For each luting agent, the specimens were exposed to one of the following water storage times (n=5): 1 day (T1), 7 days (T7), 90 days (T90) and 180 days (T180). Push-out tests were performed after the storage times. Control specimens were not exposed to water storage, but subjected to the push-out test 10 min after post cementation. Data (in MPa) were analyzed by Kruskal-Wallis and Dunn`s test (α=0.05). Cement type and water storage time had a significant effect (p<0.05) on the push-out bond strength. CB showed significantly higher values of retention (p<0.05) than KC and FC, irrespective of the water storage time. Water storage increased significantly the push-out bond strength in T7 and T90, regardless of the cement type (p<0.05). The results showed that fiber posts luted to post spaces with the self-cured resin cement exhibited the best bonding performance throughout the 180-day water storage period. All cements exhibited a tendency to increase the bond strength after 7 and 90 days of water storage, decreasing thereafter.

Effect of cement type and water storage time on the push-out bond strength of a glass fiber post

This study investigated the effects of the cement type and the water storage time on the push-out bond strength of a glass fiber post. Glass fiber posts (Fibrekor, Jeneric Pentron) were luted to post spaces using a self-cured resin cement (C&B Cement [CB]), a glass ionomer cement (Ketac Cem [KC]) or a resin-modified glass ionomer cement (GC FujiCEM [FC]) according to the manufacturers’ instructions. For each luting agent, the specimens were exposed to one of the following water storage times (n=5): 1 day (T1), 7 days (T7), 90 days (T90) and 180 days (T180). Push-out tests were performed after the storage times. Control specimens were not exposed to water storage, but subjected to the push-out test 10 min after post cementation. Data (in MPa) were analyzed by Kruskal-Wallis and Dunn`s test (α=0.05). Cement type and water storage time had a significant effect (p<0.05) on the push-out bond strength. CB showed significantly higher values of retention (p<0.05) than KC and FC, irrespective of the water storage time. Water storage increased significantly the push-out bond strength in T7 and T90, regardless of the cement type (p<0.05). The results showed that fiber posts luted to post spaces with the self-cured resin cement exhibited the best bonding performance throughout the 180-day water storage period. All cements exhibited a tendency to increase the bond strength after 7 and 90 days of water storage, decreasing thereafter.

Este estudo investigou os efeitos do tipo de cimento e do tempo de armazenamento em água na resistência adesiva ao cisalhamento de pinos de fibra. Pinos de fibra de vidro (Fibrekor, JenericPentron) foram cimentados aos condutos radiculares usando o cimento resinoso autopolimerizável (C&B Cement [CB]), o cimento de ionômero de vidro (Ketac Cem [KC]) ou o cimento de ionômero de vidro modificado por resina (GC FujiCEM [FC]) de acordo com as instruções dos fabricantes. Para cada cimento, os espécimes foram expostos a um dos seguintes tempos de armazenamento em água (n=5): 1 dia (T1), 7 dias (T7), 90 dias (T90) e 180 dias (T180). Os testes de resistência adesiva ao cisalhamento foram realizados após os períodos de armazenamento. Os espécimes controles não foram expostos ao armazenamento em água, mas submetidos ao teste de resistência adesiva ao cisalhamento 10 min após a cimentação do pino. Os dados (MPa) foram analisados usando Kruskal-Wallis e teste de Dunn (α=0,05). O tipo de cimento e o tempo de armazenamento em água afetaram significantemente a resistência adesiva ao cisalhamento (p<0,05). CB apresentou valores de retenção significantemente superiores a KC e FC, independentemente do tempo de armazenamento em água. Esse, por sua vez, aumentou significantemente a resistência adesiva ao cisalhamento em T7 e T90, independentemente do tipo de cimento (p<0,05). Os resultados indicaram que os pinos de fibra cimentados aos condutos radiculares com o cimento resinoso autopolimerizável apresentou a melhor performance adesiva durante todo o período de armazenamento em água de 180 dias. Todos os cimentos apresentaram uma tendência a aumentar a resistência adesiva ao cisalhamento após 7 e 90 dias de armazenamento em água, diminuindo posteriormente.

Efeito da espessura da camada de cimento na integridade e resistência adesiva de pinos de resina reforçados por fibra de vidro / Effect of the thickness of the resin cement on the bond integrity and strength of glass fiber fiber-reinforced composite post

A perda de adesão é uma falha comum reportada para os pinos reforçados por fibra e usualmente ocorre ao longo da interface adesiva entre a dentina radicular e o cimento resinoso. A espessura de cimento resinoso ideal para preservar a continuidade da interface adesiva cimento-dentina e aumentar a retenção do pino é desconhecida. O objetivo deste estudo foi avaliar a influência da espessura do cimento na integridade e na resistência adesiva de dois cimentos resinosos empregados para a cimentação de pinos reforçados por fibra. Trinta incisivos laterais superiores humanos com comprimentos radiculares semelhantes foram selecionados, secionados na jução cimento-esmalte e tratados endodonticamente. As raízes foram aleatoriamente divididas em seis grupos (n=5), e os condutos radiculares foram preparados a uma profundidade de 8 mm usando uma das três brocas com diâmetro diferente: Broca Largo n 3 para o grupo controle (L3 1 mm); Broca Largo nℵ 4 (L4 - 1,25 mm) e Broca Largo nℵ 5 (L5 1,5 mm) para os grupos experimentais. Pinos de resina reforçados por fibra de vidro (Fibrekor post, Jeneric Pentron), 1 mm de diâmetro, foram cimentados aos condutos radiculares utilizando o cimento resinoso dual (Duolink, Bisco) ou o cimento resinoso autopolimerizável (C&B Cement, Bisco). A porção de cada espécime contendo os pinos reforçados por fibra foi secionada transversalmente em tres seções (cervical, média e apical) de 2 mm de espessura utilizando um disco diamantado em máquina de corte seriado sob refrigeração com água. As seções foram polidas, limpas ultrassonicamente e duplicadas com polivinil siloxano. Réplicas em resina epoxica das seções foram obtidas para a mensuração da espessura do cimento e da integridade adesiva na interface cimento-dentina por meio de MEV. As seções foram armazenadas em solução fisiológica a 37º C por uma semana e, então, submetidas ao teste push-out em uma máquina de ensaio universal a velocidade de 0,5 mm/min-1, e a força máxima requerida...

Resistência à fratura de dentes tratados endodonticamente, reconstruídos com pinos de fibras de polietileno e com pinos biológicos / Fracture strength of endodontically treated teeth reconstructed with woven polyethylene fiber posts and biological posts

Objetivo:Avaliar a resistência e o padrão de fratura de dentes tratados endodonticamente com raízes estruturalmente enfraquecidas, reconstruídas com pinos de fibras de polietileno e pinos biológicos. Métodos: Após remoção das coroas, sessenta caninos superiores tratados endodonticamente foram distribuídos em quatro grupos: 1) preparo convencional dos condutos e pinos de fibras de polietileno; 2) preparo convencional dos condutos e pinos biológicos; 3) condutos medianamente alargados e pinos biológicos; 4) condutos amplamente alargados e pinos biológicos. Os pinos foram cimentados com cimento resinoso Enforce (Dentsply Ind. e Com., Petrópolis, Rio de Janeiro, Brasil) e construiu-se a porção coronária com resina composta Ti-Core(Essential Dental Systems, S. Hackensack, NJ, USA). Os espécimes foram testados sob compressão em máquina de ensaios universal. Resultados: Os valores de resistência à fratura obtidos foram: grupo 1 - 45,46kgf; grupo 2 - 53,30kgf; grupo 3 - 58,67kgf; grupo 4 - 47,91kgf, com diferença estatisticamente significante entre os grupos 1 e 3 (p < 0,05). Observou-se o seguinte padrão de fratura: grupo 1 - ampla predominância de fratura da porção coronária do núcleo; grupos 2 e 3 - padrão variado de fraturas; grupo 4 - todas as raízes fraturaram. Conclusão: Ambos os pinos mostraram-se promissores para o uso proposto (adequada resistência à fratura e padrão de fraturas favorável). Os pinos biológicos parecem capazes de promover reforço das raízes, porém 100% das raízes amplamente alargadas fraturaram.

Objective: To investigate the fracture strength and mode of endodontically treated teeth with structurally weakened roots reconstructed withwoven polyethylene fiber posts and biological posts. Methods: After removing the crowns, 60 endodontically treated maxillary canines were distributed into 4 groups: 1) conventional root canal preparation and reconstruction with polyethylene fiber posts; 2) conventional root canal preparation and reconstruction with biological posts; 3) moderately flared root canals and reconstruction with biological posts; 4) widely flared root canals and reconstruction with biological posts. The posts were cemented with resin cement Enforce (Dentsply Ind. e Com., Petrópolis, Rio de Janeiro, Brasil) and the core was constructed with Ti-Core (EssentialDental Systems, S. Hackensack, NJ, USA) resin composite. The specimens were tested under compression in a universal testing machine. Results: The following fracture strength values were obtained: Group 1 - 45.46kgf; Group 2 - 53.30kgf; Group 3 - 58.67kgf; Group 4 - 47.91kgf, with statistically significant differences between Groups 1 and 3 (p<0.05). The following fracture modes were observed: Group 1 - predominance of fracture of the coronal portion of the post; Groups 2 and 3 - various fracture patterns; Group 4 - all roots fractured. Conclusion: Both posts were shown to be promising (adequate fracture strength and favorable pattern of fracture). Biological posts appear to be capable of reinforcing the root to some extent; however, fracture occured in all roots with widely flared root canals.

Influence of different cantilever extensions and glass or polyaramide reinforcement fibers on fracture strength of implant-supported temporary.

In long-term oral rehabilitation treatments, resistance of provisional crowns is a very important factor, especially in cases of an extensive edentulous distal space. The aim of this laboratorial study was to evaluate an acrylic resin cantilever-type prosthesis regarding the flexural strength of its in-balance portion as a function of its extension variation and reinforcement by two types of fibers (glass and polyaramid), considering that literature is not conclusive on this subject. Each specimen was composed by 3 total crowns at its mesial portion, each one attached to an implant component (abutment), while the distal portion (cantilever) had two crowns. Each specimen was constructed by injecting acrylic resin into a two-part silicone matrix placed on a metallic base. In each specimen, the crowns were fabricated with either acrylic resin (control group) or acrylic resin reinforced by glass (Fibrante, Angelus) or polyaramide (Kevlar 49, Du Pont) fibers. Compression load was applied on the cantilever, in a point located 7, 14 or 21 mm from the distal surface of the nearest crown with abutment, to simulate different extensions. The specimen was fixed on the metallic base and the force was applied until fracture in a universal test machine. Each one of the 9 sub-groups was composed by 10 specimens. Flexural strength means (in kgf) for the distances of 7, 14 and 21 mm were, respectively, 28.07, 8.27 and 6.39 for control group, 31.89, 9.18 and 5.16 for Kevlar 49 and 30.90, 9.31 and 6.86 for Fibrante. Data analysis ANOVA showed statistically significant difference (p<0.05) only regarding cantilever extension. Tukey's test detected significantly higher flexural strength for the 7 mm-distance, followed by 14 and 21 mm. Fracture was complete only on specimens of non-reinforced groups.

In vitro wear resistance of three types of polymethyl methacrylate denture teeth.

The wear resistance of denture teeth is important to the longevity of removable prostheses of edentulous patients. The ability of denture teeth to maintain a stable occlusal relationship over time may be influenced by this property. The purpose of this in vitro study was to evaluate the wear resistance of polymethyl methacrylate (PMMA) denture teeth based on their chemical composition when opposed by a ceramic antagonist. The maxillary canines (n=10) of 3 PMMA denture teeth (Trubyte Biotone, cross-linked PMMA; Trilux, highly cross-linked IPN (interpenetrating polymer network)-PMMA; and Vivodent, highly cross-linked PMMA) were secured in an in vitro 2-body wear-testing apparatus that produced sliding contact of the specimens (4.5 cycles/s, sliding distance of 20 mm, under 37 degrees C running water) against glazed or airborne particle abraded ceramic. Wear resistance was measured as height loss (mm) under 300 g (sliding force) after 100,000 cycles, using a digital measuring microscope. Mean values were analyzed by 2-way ANOVA and Tukey's test (a=0.05). The wear of Trubyte Biotone (0.93 +/- 0.14 mm) was significantly higher than that of both other types of teeth tested against abraded ceramic (p<0.05). The Vivodent tooth (0.64 +/- 0.17 mm) exhibited the best wear resistance among the denture teeth tested against airborne particle abraded ceramic. There were no statistically significant differences (p>0.05) in wear among the 3 denture teeth evaluated against glazed ceramic. Trilux and Vivodent teeth tested against either glazed or airborne particle abraded ceramic did not differ significantly from each other (p<0.05). All teeth showed significantly more wear against airborne particle abraded ceramic than against glazed ceramic (p<0.05). In conclusion, the three types of PMMA denture teeth presented significantly different wear resistance against the abraded ceramic. The high-strength PMMA denture teeth were more wear-resistant than the conventional PMMA denture tooth.

O que saber para conhecer e selecionar dentes artificiais / What you nedd to know to choose denture teeth

O objetivo deste trabalho foi elucidar os conceitos relacionados à polimerização da resina acrílica, e classificar os dentes artificiais poliméricos sob a ótica da composição química da matéria-prima que compõe o produto final. Inúmeras variáveis envolvidas no processo de polimerização da resina acrílica podem influenciar a sua qualidade final e gerar dentes artificiais com propriedades diferenciadas. Os principais artifícios técnicos utilizados pela indústria odontológica, para o aperfeiçoamento da resina acrílica, envolveram o aumento do peso molecular, o cruzamento dos polímeros (cross-linked), a copolimerização, o uso da resina IPN, o acréscimo de carga mineral e pigmentos e a prensagem em múltiplas camadas. D e acordo com a variante de polimerização utilizada durante o processo de fabricação da resina acrílica, é possível dividir os dentes artificiais disponíveis atualmente no mercado odontológico em dois grupos principais: dentes convencionais e dentes de alta resistência

Análise do método de Willis na determinação da dimensão vertical de oclusão / Analysis of Willis' method on determining vertical dimension of occlusion

O presente trabalho avaliou o método de Willis na determinação da dimensão vertical em 39 indivíduos dentados, com idade entre 19 e 45 anos. Uma forte correlação foi observada entre o terço médio da face e a DVR (r=0,73, p = 0,000) e, entre o terço médio e a DVO (r = 0,74, p = 0.000). Não houve diferença significante entre o terço médio e a DVO (p=0.11), contudo foram observadas diferenças entre o terço médio e a DVR (p =0,000), e entre a DVO e a DVR (p = 0.000). A análise estatística indicou que o método de Willis foi adequado na determinação da dimensão vertical de oclusão.

Utilização de pinos biológicos em reconstrução de raízes debilitadas / Utilization of biological posts to reconstruct weakened roots

A adequada reconstrução de dentes endodonticamente tratados e com grande perda de tecido dentinário é um dos desafios da Odontologia Restauradora. Nenhum dos pinos intra-radiculares pré-fabricados encontrados no mercado preenche todas as propriedades biológicas e mecânicas ideais. Recentemente, tem sido indicada uma técnica com múltiplas vantagens para reconstrução de dentes despolpados com raízes enfraquecidas, consistindo na utilização de pinos dentários obtidos a partir de dentes naturais. Este artigo apresenta, através de um caso clínico, todos os detalhes necessários para execução da técnica.

Adequate reconstruction of endodontically treated teeth with severe loss of dentine tissue is one of the challenges of Restorative Dentistry. None of the commercially available pre-fabricated intraradicular posts meets all ideal biological and mechanical properties. Recently, a technique for the reconstruction of pulpless teeth with weakened roots has been indicated - the use of dental posts obtained from natural teeth. This article presents, through a clinical case, important details for the execution of the technique.

In vitro wear resistance of three types of polymethyl methacrylate denture teeth

The wear resistance of denture teeth is important to the longevity of removable prostheses of edentulous patients. The ability of denture teeth to maintain a stable occlusal relationship over time may be influenced by this property. The purpose of this in vitro study was to evaluate the wear resistance of polymethyl methacrylate (PMMA) denture teeth based on their chemical composition when opposed by a ceramic antagonist. The maxillary canines (n=10) of 3 PMMA denture teeth (Trubyte Biotone, cross-linked PMMA; Trilux, highly cross-linked IPN (interpenetrating polymer network)-PMMA; and Vivodent, highly cross-linked PMMA) were secured in an in vitro 2-body wear-testing apparatus that produced sliding contact of the specimens (4.5 cycles/s, sliding distance of 20 mm, under 37°C running water) against glazed or airborne particle abraded ceramic. Wear resistance was measured as height loss (mm) under 300 g (sliding force) after 100,000 cycles, using a digital measuring microscope. Mean values were analyzed by 2-way ANOVA and Tukey’s test (á=0.05). The wear of Trubyte Biotone (0.93 ± 0.14 mm) was significantly higher than that of both other types of teeth tested against abraded ceramic (p<0.05). The Vivodent tooth (0.64 ± 0.17 mm) exhibited the best wear resistance among the denture teeth tested against airborne particle abraded ceramic. There were no statistically significant differences (p>0.05) in wear among the 3 denture teeth evaluated against glazed ceramic. Trilux and Vivodent teeth tested against either glazed or airborne particle abraded ceramic did not differ significantly from each other (p<0.05). All teeth showed significantly more wear against airborne particle abraded ceramic than against glazed ceramic (p<0.05). In conclusion, the three types of PMMA denture teeth presented significantly different wear resistance against the abraded ceramic. The high-strength PMMA denture teeth were more wear-resistant than the conventional PMMA denture tooth.

Influência do grau de adaptação de pinos de fibras de vidro ao canal radicular na resistência à remoção por tração / Influence of glass fiber post adaptation in the root canal on the tensile strength

Este estudo investigoua resistência à remoção por tração de pinos de fibra de vidro e o padrão de falhas ocorrido em função do grau de adaptação dos pinos ao conduto radicular. Foram selecionados quarenta caninos superiores humanos, com uma média de noventa dias de extração. Antes e durante o experimento, armazenaram-se os dentes em condições úmidas (soro fisiológico). Após tratamento endodôntico, seccionou-se a coroa desses dentes para que os remanescentes radiculares fossem padronizados com o comprimento médio de 15 mm, com um diâmetro de 5 a 5,5 mm no sentido mesiodistal e com diâmetro de 7 a 7,5 mm no sentido vestibulopalatino. As raízes foram aleatoriamente distribuídas em quatro grupos (n = 10): no Grupo 1, todo o conduto foi preparado com broca Largo 4®; no Grupo 2, o conduto foi preparado como no Grupo 1 e, após, o terço cervical foi alargado com ponta diamantada 1016 HL; no Grupo 3, após o preparo inicial como feito no Grupo 1, os terços cervical e médio foram alargados com ponta diamantada 1016 HL; no Grupo 4, todo o conduto foi alargado com ponta diamantada 1016 HL. Os condutos foram preparados com 9 mm de profundidade e pinos Reforpost nº 2® foram cimentados com adesivo Scoth Bond Multi-Uso Plus® e cimento resinoso RelyX CRA®. A porção coronária do núcleo foi construída com resina composta Filtek Z250®. Após 24h de armazenamento, os espécimes foram submetidos a testes de resistência à remoção por tração em máquina de ensaios universal Kratos modelo K-2000MP®, na velocidade de 0,5 mm/min. Os seguintes valores foram encontrados: Grupo 1 - 47,67 kgf (d.p. = 12,80); Grupo 2 - 40,92 kgf (d.p. = 9,94); Grupo 3 - 43,63 kgf (d.p. = 9,30); Grupo 4 - 37,57 kgf (d.p. = 8,62). Não houve diferença estatisticamente significativa entre os grupos (p < 0,05). Nos Grupos 1,2 e 3 o padrão de falha mais comum foi adesivo (interface dentina-cimento) e, no Grupo 4, houve 50 por cento de falhas adesivas e 40 por cento de falhas combinadas.

Influence of different catilever extensions and glass or polyamaramid reinforcement fibers on fracture strength of implant-supported temporary

In long-term oral rehabilitation treatments, resistance of provisional crowns is a very important factor, especially in cases of an extensive edentulous distal space. The aim of this laboratorial study was to evaluate an acrylic resin cantilever-type prosthesis regarding the flexural strength of its in-balance portion as a function of its extension variation and reinforcement by two types of fibers (glass and polyaramid), considering that literature is not conclusive on this subject. Each specimen was composed by 3 total crowns at its mesial portion, each one attached to an implant component (abutment), while the distal portion (cantilever) had two crowns. Each specimen was constructed by injecting acrylic resin into a two-part silicone matrix placed on a metallic base. In each specimen, the crowns were fabricated with either acrylic resin (control group) or acrylic resin reinforced by glass (Fibrante, Angelus) or polyaramide (Kevlar 49, Du Pont) fibers. Compression load was applied on the cantilever, in a point located 7, 14 or 21 mm from the distal surface of the nearest crown with abutment, to simulate different extensions. The specimen was fixed on the metallic base and the force was applied until fracture in a universal test machine. Each one of the 9 sub-groups was composed by 10 specimens. Flexural strength means (in kgf) for the distances of 7, 14 and 21 mm were, respectively, 28.07, 8.27 and 6.39 for control group, 31.89, 9.18 and 5.16 for Kevlar 49 and 30.90, 9.31 and 6.86 for Fibrante. Data analysis ANOVA showed statistically significant difference (p<0.05) only regarding cantilever extension. Tukey's test detected significantly higher flexural strength for the 7 mm-distance, followed by 14 and 21 mm. Fracture was complete only on specimens of non-reinforced groups.