ABSTRACT
Neither the vinyl nor the latex gloves tested affected any of the condensation silicone putties tested. The vinyl gloves tested had no effect on any of the vinyl polysiloxane putties. Some brands of latex gloves as received from the distributor caused severe retardation or complete inhibition of setting in most vinyl polysiloxane putties; other brands of latex gloves affected the setting in the vinyl polysiloxane putties to varying degrees. Washing the latex gloves decreased the effect of inhibition of setting on the putty but did not eliminate it. Thus, latex gloves should not be worn while mixing or handling vinyl polysiloxane putties. Putties should not be dispensed while wearing latex gloves as the entire jar can become contaminated. If gloves are removed to mix the putty, hands should be washed thoroughly; however, this violates the barrier technique and is not recommended. Vinyl gloves may be worn over latex gloves (or by themselves), for dispensing and mixing the putty; but the vinyl gloves should not be contaminated with powder from the latex gloves. To assure compatibility, the putty/glove combination should always be checked.
Subject(s)
Dental Impression Materials , Gloves, Surgical , Polyvinyls , Silicones , Siloxanes , Chemical Phenomena , Chemistry, Physical , Detergents , Humans , Powders , Rubber , Surface Properties , Time Factors , Vinyl Compounds , WaterABSTRACT
The temperature rise of threaded pins was measured when cut under various conditions and with different instruments. The air-water coolant and intermittent cutting produced significantly lower temperature rises than the air coolant and constant cutting, respectively. No particular carbide bur or diamond stone is recommended since little difference existed among them with respect to heat generation.
