On the Structure, Stability, and Cell Uptake of Nanostructured Lipid Carriers for Drug Delivery.

The efficacy of nanostructured lipid carriers (NLC) for drug delivery strongly depends on their stability and cell uptake. Both properties are governed by their compositions and internal structure. To test the effect of the lipid composition of NLC on cell uptake and stability, three kinds of liquid lipids with different degrees of unsaturation are employed. After ensuring homogeneous size distributions, the thermodynamic characteristics, stability, and mixing properties of NLC are characterized. Then the rates and predominant pathways of cell uptake are determined. Although the same surfactant is used in all cases, different uptake rates are observed. This finding contradicts the view that the surface properties of NLC are dominated by the surfactant. Instead, the uptake rates are explained by the structure of the nanocarrier. Depending on the mixing properties, some liquid lipids remain inside the nanocarrier, while other liquid lipids are present on the surface. Nanocarriers with liquid lipids on the surface are taken up more readily by the cells. This shows that the engineering of efficient lipid nanocarriers requires a delicate balance of interactions between all components of the nanocarrier on the molecular level.

Improvement of a pharmaceutical powder mixing process in a tote blender via DEM simulations.

An industrial-scale pharmaceutical powder blending process was studied via discrete element method (DEM) simulations. A DEM model of two active pharmaceutical ingredient (API) components and a combined excipient component was calibrated by matching the simulated response in a dynamic angle of repose tester to the experimentally observed response. A simulation of the 25-minute bin blending process predicted inhomogeneous API distributions along the rotation axis of the blending container. These concentration differences were confirmed experimentally in a production-scale mixing trial using high-performance liquid chromatography analysis of samples from various locations in the bin. Several strategies to improve the blend homogeneity were then studied using DEM simulations. Reversing the direction of rotation of the blender every minute was found to negligibly improve the blending performance. Introducing a baffle into the lid at a 45° angle to the rotation axis sped up the axial mixing and resulted in a better final blend uniformity. Alternatively, rotating the blending container 90° around the vertical axis five minutes prior to the process end was predicted to reduce axial segregation tendencies.

Drying capacity of a continuous vibrated fluid bed dryer - Statistical and mechanistic model development.

The drying capacity of a continuous vibrated fluid bed dryer was studied using a DoE by varying microcrystalline cellulose content in the formulation, water amount in the twin-screw granulation, inlet air temperature, air flow rate and the acceleration of the horizontal fluid-bed. Temperature and humidity profiles were measured along the dryer using wireless sensors. For the parameter space explored in this study, acceleration was the most influential process parameter of the dryer regarding the resulting granule moisture content. An empirical model was developed that allowed for fast and accurate moisture content prediction that could be incorporated into an enhanced control strategy. In addition, a mechanistic model was formulated that allow for prediction of temperature and moisture profiles, and most importantly the moisture content of the granules inside the dryer. The mechanistic model can be integrated to other unit operation models to provide overall understanding of an integrated continuous process line. The mechanistic model also makes it possible to define the equipment design requirements (e.g., length of the dryer) to meet the specific needs in terms of drying capacity, temperature and moisture profile.

Bench to batch: Linking pharmaceutical powder flow characterisation, intermediate bulk container discharge and video observations.

Five well known excipients and a model drug substance with varied particle properties and bulk behaviour were chosen for the study. Based on the results APAP, NaCMC-XL, mannitol and DCPA were selected for a design to understand the impact of different blends. Two pilot scale unvented IBCs were used in the study. The IBC discharge rates were measured using a catch balance and the mode of flow and powder behaviour inside the IBC was recorded using a camera. The videos inside the IBC showed that regardless of flow mode, for powder to flow from the IBC an air burst was necessary. This was similar to observations when emptying water from a bottle. The extent of the air flow inside the IBC was strong and could possibly result in fluidisation segregation. The discharge curves of 15° and 30° hopper half angles were very similar, which was explained by the vertical air movement in the steeper hopper, which reduces the particle acceleration. Several good indicators of flow/no flow in the IBCs were found. However, for predicting the discharge rate there was a linear correlation between flow through an orifice and IBC discharge rate.

Model-Guided Development of a Semi-Continuous Drying Process.

INTRODUCTION: With an increased adoption of continuous manufacturing for pharmaceutical production, the ConsiGma® CTL25 wet granulation and tableting line has reached widespread use. In addition to the continuous granulation step, the semi-continuous six-segmented fluid bed dryer is a key unit in the line. The dryer is expected to have an even distribution of the inlet air between the six drying cells. However, process observations during manufacturing runs showed a repeatable pattern in drying time, which suggests a variability in the drying performance between the different cells of the dryer. The aim of this work is to understand the root-cause of this variability. MATERIALS AND METHODS: In a first step, the variability in the air temperature and air flow velocity between the dryer cells was measured on an empty dryer. In a second step, the experimental data were interpreted with the help of results from computational fluid dynamics (CFD) simulations to better understand the reasons for the observed variability. RESULTS: The CFD simulations were used to identify one cause of the measured difference in the air temperature, showing the impact of the air inlet design on the temperature distribution in the dryer. CONCLUSIONS: Although the simulation could not predict the exact temperature, the trend was similar to the experimental observations, demonstrating the added value of this type of simulation to guide process development, engineering decisions and troubleshoot equipment performance variability.

Powder flow from an intermediate bulk container - Discharge predictions and experimental evaluation.

Powders are usually dispensed, blended, and transferred between different manufacturing steps in so-called Intermediate Bulk Containers (IBCs), and discharge from an IBC plays a critical role in the ability to manufacture high-quality tablets. To better understand IBC discharge, the flow behavior of selected excipients was comprehensively characterized using a number of techniques including the Hausner ratio/Carr's index, Erweka flow test, FlowPro flow test, shear test and wall friction test as well as FT4 powder rheometer experiments. Jenike's hopper design methodology was then used to predict the minimum non-arching outlet diameter and the mode of flow. Furthermore, the discharge rate from an IBC was predicted using a simple model that takes into account gravity and aerodynamic drag. The predictions were experimentally verified by measuring the discharge rate from a 20 L IBC using five commonly-used excipients. The small-scale Erweka flow test provided the best prediction of the full-scale IBC discharge experiment. Furthermore, a simple model that relied only on the particle size of the material and the diameter of the discharge opening was found to predict the IBC discharge rate remarkably well.

Characterization of microcrystalline cellulose spheres and prediction of hopper flow based on a µ(I)-rheology model.

The objective of this study was to characterize the rheology of a pharmaceutical material in the context of the µ(I)-rheology model and to use this model to predict powder flow in a manufacturing operation that is relevant to pharmaceutical manufacturing. The rheology of microcrystalline cellulose spheres was therefore characterized in terms of the µ(I)-rheology model using a modified Malvern Kinexus rheometer. As an example of an important problem in pharmaceutical manufacturing, the flow of these particles from a hopper was studied experimentally and numerically using a continuum Navier-Stokes solver based on the Volume-Of-Fluid (VOF) interface-capturing numerical method. The work shows that the rheology of this typical pharmaceutical material can be measured using a modified annular shear rheometer and that the results can be interpreted in terms of the µ(I)-rheology model. It is demonstrated that both the simulation results and the experimental data show a constant hopper discharge rate. It is noted that the model can suffer from ill-posedness and it is shown how an increasingly fine grid resolution can result in predictions that are not entirely physically realistic. This shortcoming of the numerical framework implies that caution is required when making a one-to-one comparison with experimental data.

Towards quantitative prediction of the performance of dry powder inhalers by multi-scale simulations and experiments.

This work demonstrates the use of multi-scale simulations coupled with experiments to build a quantitative prediction tool for the performance of adhesive mixtures in a dry powder inhaler (DPI). Using discrete element model (DEM), the behaviour of fine-carrier particle assemblies upon different mechanisms encountered during dose entrainment and dispersion can be described at the individual particle level. Combining these results with computational fluid dynamics (CFD) simulations, the complete dosing event from a DPI can be captured and key performance measures can be extracted. A concept of apparent surface energy, ASE, was introduced to overcome challenges associated with the complex particle properties, e.g. irregular particle shapes and surface roughness. This approach correctly predicts trends observed experimentally regarding API adhesivity, flow rate and device geometry. By incorporating the effects of drug load, critical adhesion and surface energy distributions to the simulation tool, the fine particle fraction could be predicted with good agreement to experiments for two different formulations in two different devices at two flow rates. It is concluded that multi-scale simulations provide a useful tool to support device and formulation development, as well as to gain further insight into the physical mechanisms governing dispersion from DPIs.

Experimental and Quantum Chemical Evaluations of Pyridine Oxidation Under Drug Development Stress Test Conditions.

The oxidation reaction of pyridine by hydrogen peroxides in water media was investigated by combining quantum chemical calculations and laboratory experiments. Pyridine was selected as a model system for aromatic amines that frequently occurs in drug molecules. Several different reaction conditions, commonly used in stress testing of drug molecules during drug development, were investigated to increase mechanistic insight to this class of oxidation reactions. Of special interest is to note that small amounts of acetonitrile, a regularly used cosolvent to keep poorly soluble drug molecules in water solution, could catalyze the oxidation reaction in the presence of hydrogen peroxide. Consequently, attention needs to be taken when comparing data from different stress test studies of amine oxidation by hydrogen peroxides at different pH, and with and without acetonitrile. In particular, they need to be controlled when identifying the proper intrinsic stability of the drug molecule.

A qualitative method for prediction of amine oxidation in methanol and water.

We have developed a predictive method, based on quantum chemical calculations, that qualitatively predicts N-oxidation by hydrogen peroxides in drug structures. The method uses linear correlations of two complementary approaches to estimate the activation barrier without calculating it explicitly. This method can therefore be automated as it avoids demanding transition state calculations. As such, it may be used by chemists without experience in molecular modeling and provide additional understanding to experimental findings. The predictive method gives relative rates for N,N-dimethylbenzylamine and N-methylmorpholine in good agreement with experiments. In water, the experimental rate constants show that N,N-dimethylbenzylamine is oxidized three times faster than N-methylmorpholine and in methanol it is two times faster. The method suggests it to be two and five times faster, respectively. The method was also used to correlate experimental with predicted activation barriers, linear free-energy relationships, for a test set of tertiary amines. A correlation coefficient R(2) = 0.74 was obtained, where internal diagnostics in the method itself allowed identification of outliers. The method was applied to four drugs: caffeine, azelastine, buspirone, and clomipramine, all possessing several nitrogens. Both overall susceptibility and selectivity of oxidation were predicted, and verified by experiments.

Fundamental mechanisms for tablet dissolution: simulation of particle deaggregation via Brownian dynamics.

For disintegrating tablet formulations, deaggregation of small particles is sometimes one of the rate-limiting processes for drug release. Because the tablets contain particles that are in the colloidal size range, it may be assumed that the deaggregation process, at least qualitatively, is governed by Brownian motion and electrostatic and van der Waals interactions, where the latter two can be described by a Derjaguin-Landau-Verwey-Overbeek interaction potential. On the basis of this hypothesis, the present work investigates the applicability of Brownian dynamics (BD) simulations as a tool to understand the deaggregation mechanism on a fundamental level. BD simulations are therefore carried out to determine important deaggregation characteristics such as the so-called mean first passage time (MFPT) and first passage time distribution (FPTD) for various two-, three-, and four-particle aggregates. The BD algorithm is first validated and tuned by comparison with analytical expressions for the MFPT and FPTD in the two-particle case. It is then shown that the same algorithm can also be used for the three-particle case. Lastly, the simulations of three- and four-particle aggregates show that the initial shape of the aggregates may significantly affect the deaggregation time.

A mechanistic model for the prediction of in-use moisture uptake by packaged dosage forms.

A mechanistic model for the prediction of in-use moisture uptake of solid dosage forms in bottles is developed. The model considers moisture transport into the bottle and moisture uptake by the dosage form both when the bottle is closed and when it is open. Experiments are carried out by placing tablets and desiccant canisters in bottles and monitoring their moisture content. Each bottle is opened once a day to remove one tablet or desiccant canister. Opening the bottle to remove a tablet or canister also causes some exchange of air between the bottle headspace and the environment. In order to ascertain how this air exchange might depend on the customer, tablets and desiccant canisters are removed from the bottles by either carefully removing only one or by pouring all of the tablets or desiccant canisters out of the bottle, removing one, and pouring the remaining ones back into the bottle. The predictions of the model are found to be in good agreement with experimental data for moisture sorption by desiccant canisters. Moreover, it is found experimentally that the manner in which the tablets or desiccant canisters were removed does not appreciably affect their moisture content.