Preparation of Monodisperse Silica Mesoporous Microspheres with Narrow Pore Size Distribution.

The purpose of this study is to prepare monodisperse silica mesoporous microspheres with narrow pore size distribution to promote their application in the field of liquid chromatography. An improved emulsion method was used to prepare silica mesoporous microspheres, and the rotary evaporation temperature, emulsification speed, dosage of porogen DMF, and dosage of the catalyst NH3·H2O were optimized. Subsequently, these microspheres were respectively treated by alkali-heating, calcination, and sieving. The D50 (particle size at the cumulative particle size distribution percentage of 50%) of as-prepared silica mesoporous microspheres is 26.3 µm, and the D90/D10 (the ratio of particle size at a cumulative particle size distribution percentage of 90% to a cumulative particle size distribution percentage of 10%) is 1.94. The resultant silica mesoporous microspheres have distinctive pore structures, with a pore volume of more than 1.0 cm3/g, an average pore size of 11.35 nm, and a median pore size of 13.4 nm. The silica mesoporous microspheres with a large particle size, uniform particle size distribution, large average pore size and pore volume, and narrow mesopore size distribution can basically meet the requirements of preparative liquid chromatographic columns.

[Preparation technology comparison and performance evaluation of different protein A affinity chromatographic materials].

Protein A affinity chromatographic materials are widely used in clinical medicine and biomedicine because of their specific interactions with immunoglobulin G (IgG). Both the characteristics of the matrix, such as its structure and morphology, and the surface modification method contribute to the affinity properties of the packing materials. The specific, orderly, and oriented immobilization of protein A can reduce its steric hindrance with the matrix and preserve its bioactive sites. In this study, four types of affinity chromatographic materials were obtained using agarose and polyglycidyl methacrylate (PGMA) spheres as substrates, and multifunctional epoxy and maleimide groups were used to fix protein A. The effects of the ethylenediamine concentration, reaction pH, buffer concentration, and other conditions on the coupling efficiency of protein A and adsorption performance of IgG were evaluated. Multifunctional epoxy materials were prepared by converting part of the epoxy groups of the agarose and PGMA matrices into amino groups using 0.2 and 1.6 mol/L ethylenediamine, respectively. Protein A was coupled to the multifunctional epoxy materials using 5 mmol/L borate buffer (pH 8) as the reaction solution. When protein A was immobilized on the substrates by maleimide groups, the agarose and PGMA substrates were activated with 25% (v/v) ethylenediamine for 16 h to convert all epoxy groups into amino groups. The maleimide materials were then converted into amino-modified materials by adding 3 mg/mL 3-maleimidobenzoyl-N-hydroxysuccinimide ester (MBS) dissolved in dimethyl sulfoxide (DMSO) and then suspended in 5 mmol/L borate buffer (pH 8). The maleimide groups reacted specifically with the C-terminal of the sulfhydryl group of recombinant protein A to achieve highly selective fixation on both the agarose and PGMA substrates. The adsorption performance of the affinity materials for IgG was improved by optimizing the bonding conditions of protein A, such as the matrix type, matrix particle size, and protein A content, and the adsorption properties of each affinity material for IgG were determined. The column pressure of the protein A affinity materials prepared using agarose or PGMA as the matrix via the maleimide method was subsequently evaluated at different flow rates. The affinity materials prepared with PGMA as the matrix exhibited superior mechanical strength compared with the materials prepared with agarose. Moreover, an excellent linear relationship between the flow rate and column pressure of 80 mL/min was observed for this affinity material. Subsequently, the effect of the particle size of the PGMA matrix on the binding capacity of IgG was investigated. Under the same protein A content, the dynamic binding capacity of the affinity materials on the PGMA matrix was higher when the particle size was 44-88 µm than when other particle sizes were used. The properties of the affinity materials prepared using the multifunctional epoxy and maleimide-modified materials were compared by synthesizing affinity materials with different protein A coupling amounts of 1, 2, 4, 6, 8, and 10 mg/mL. The dynamic and static binding capacities of each material for bovine IgG were then determined. The prepared affinity material was packed into a chromatographic column to purify IgG from bovine colostrum. Although all materials showed specific adsorption selectivity for IgG, the affinity material prepared by immobilizing protein A on the PGMA matrix with maleimide showed significantly better performance and achieved a higher dynamic binding capacity at a lower protein grafting amount. When the protein grafting amount was 15.71 mg/mL, the dynamic binding capacity of bovine IgG was 32.23 mg/mL, and the dynamic binding capacity of human IgG reached 54.41 mg/mL. After 160 cycles of alkali treatment, the dynamic binding capacity of the material reached 94.6% of the initial value, indicating its good stability. The developed method is appropriate for the production of protein A affinity chromatographic materials and shows great potential in the fields of protein immobilization and immunoadsorption material synthesis.

Application of cellulose to chromatographic media: Cellulose dissolution, and media fabrication and derivatization.

As the cornerstone of chromatographic technology, the development of high-performance chromatographic media is a crucial means to enhance the purification efficiency of biological macromolecules. Cellulose is a popular biological separation medium due to its abundant hydroxyl group on the surface, easy modification and, weak non-specific adsorption. In this paper, the development of cellulosic solvent systems, typical preparation methods of cellulosic chromatographic media, and the enhancement of chromatographic properties of cellulosic chromatographic media by polymeric ligand grafting strategies and their mechanism of action are reviewed. Ultimately, based on the current research status, a promising outlook for the preparation of high-performance cellulose-based chromatographic media was presented.

[Determination of 15 carbonyl compounds in soil using improved solid phase extraction-high performance liquid chromatography].

An improved solid phase extraction (SPE)-high performance liquid chromatography method was established to determine 15 carbonyl compounds, namely, formaldehyde (FOR), acetaldehyde (ACETA), acrolein (ACR), acetone (ACETO), propionaldehyde (PRO), crotonaldehyde (CRO), butyraldehyde (BUT), benzaldehyde (BEN), isovaleraldehyde (ISO), n-valeraldehyde (VAL), o-methylbenzaldehyde (o-TOL), m-methylbenzaldehyde (m-TOL), p-methylbenzaldehyde (p-TOL), n-hexanal (HEX), and 2,5-dimethylbenzaldehyde (DIM), in soil. The soil was ultrasonically extracted with acetonitrile, and the extracted samples were derivatized with 2,4-dinitrophenylhydrazine (2,4-DNPH) to generate stable hydrazone compounds. The derivatized solutions were cleaned using an SPE cartridge (Welchrom® BRP) packed with N-vinylpyrrolidone/divinylbenzene copolymer. Separation was performed on an Ultimate® XB-C18 column (250 mm×4.6 mm, 5 µm), isocratic elution was performed with acetonitrile-water (65∶35, v/v) as the mobile phase, and detection was performed at a wavelength of 360 nm. The 15 carbonyl compounds in the soil were then quantified using an external standard method. The proposed method improves the sample processing method described in the environmental standard HJ 997-2018: Soil and sediment-Determination of carbonyl compounds-High performance liquid chromatography. A series of experiments revealed the following optimal conditions for soil extraction: acetonitrile as the extraction solvent, extraction temperature of 30 ℃, and extraction time of 10 min. The results showed that the purification effect of the BRP cartridge was significantly better than that of the conventional silica-based C18 cartridge. The 15 carbonyl compounds showed good linearities, and all correlation coefficients were above 0.996. The recoveries ranged from 84.6% to 115.9%, the relative standard deviations (RSDs) ranged from 0.2% to 5.1%, and the detection limits were 0.02-0.06 mg/L. The method is simple, sensitive, and suitable for the accurate quantitative analysis of the 15 carbonyl compounds in soil specified in HJ 997-2018. Thus, the improved method provides reliable technical support for studying the residual status and environmental behavior of carbonyl compounds in soil.

Preparation and evaluation of ultra-long open-tubular capillary columns modified with zeolitic imidazolate framework-8 incorporated polymeric porous layer for liquid chromatography.

An ultra-long (5 m) open tubular capillary liquid chromatographic column was prepared by incorporating Metal Organic Framework (MOF), zeolitic imidazolate framework-8 (ZIF-8), directly into polymer coating, which was synthesized by the copolymerization of 4-vinylbenzyl chloride and divinylbenzene, on the capillary inner surface. The prepared ZIF-8 incorporate polymeric open tubular capillary column (denoted as ZIF-8-p(VBC/DVB) OTCC) was evaluated with thiourea, alkylbenzenes and polycyclic aromatic hydrocarbons as probe molecules. The results showed that the ultra-long column achieved absolute column efficiency of 130,000 plates for thiourea, and the incorporation of ZIF-8 effectively improved the chromatography performance of the OTCC. Baseline separation of aromatic compounds and position isomers was achieved based on multiple interactions provided by the zeolitic imidazolate framework and polymer, including hydrophobic interaction, π-π stacking interaction and the coordination effect. The RSD values (run-to-run, day-to-day, column-to-column, n = 3) of retention time of phenylenediamine isomers and propylbenzene isomers were less than 0.7%, 1.2% and 4.0% respectively, suggesting excellent repeatability. Finally, the prepared ZIF-8-p(VBC/DVB) OTCC was applied to the separation of hydroxyacetophenone isomers with satisfied results.