Improving drinking water quality through proficiency testing-the impact of testing method and accreditation status on Escherichia coli detection by Canadian environmental testing laboratories.

Water quality testing is crucial for protecting public health, especially considering the number of boil water advisories annually issued across Canada that impact daily life for residents in affected areas. To overcome these challenges, the development of drinking water safety plans and accessibility to regular testing using simple, rapid, and accurate materials are necessary. However, the significance of monitoring the accuracy of environmental microbiology testing laboratories cannot be overlooked. Participation in external quality assessment programs, such as those that include proficiency testing (PT), is a necessary risk management resource that ensures the effectiveness of these testing processes. Proficiency Testing Canada (PTC), in collaboration with the Canadian Microbiological Proficiency Testing (CMPT) program based at the University of British Columbia, have implemented a drinking-water microbiology PT program since 1996. Both PTC and CMPT are ISO/IEC 17043:2010-accredited EQA providers. The drinking water program provided PT challenges to subscribing testing laboratories twice per year. Each challenge consisted of four samples containing unknown concentrations of Escherichia coli (E. coli) and Enterobacter spp. Results from participants were assessed for accuracy based on the method of testing. This cross-sectional study evaluated 150 rural and metropolitan testing sites across Canada between 2016 and 2022. Multivariable logistic regression analysis was conducted to examine the impact of different testing methods and laboratory accreditation status on the proficiency scores. This approach enabled us to assess the association between multiple independent variables and the likelihood of achieving specific proficiency scores, providing insights into how testing methods and accreditation status affect overall performance. After adjusting for rural residence, testing time, and survey year, the membrane filtration method was positively associated with the likelihood of scoring satisfactory results compared to the enzyme-substrate method (OR: 1.75; CI: 1.37-2.24), as well as accreditation status (OR: 1.47; CI: 1.16-1.85). The potential for improvement in environmental laboratory testing performance through the implementation of regulated PT in drinking water safety plans is proposed, along with the need for reliable testing methods applicable to rapid drinking water microbiology testing.

Ensuring diagnostic testing accuracy for patient care and public health- COVID-19 testing scale-up from an EQA provider's perspective.

In response to the coronavirus pandemic (COVID-19) and scale up of diagnostic testing, the Canadian Microbiology Proficiency Testing program created a new proficiency testing (PT) program for the molecular and antigen detection of SARS-CoV-2. The program was geared to point of care testing (POCT) sites located in each of the eight provincial Health Authorities across British Columbia, Canada, with the intention to monitor testing quality. The PT program consisted of 6 shipments in a year, each containing a set of 4 samples either positive for SARS-CoV-2 virus or negative. The program began with initial 23 sites enrolling in March 2021, expanding to >100 participants by December 2021. After the first two surveys, it was observed that testing performance (accuracy) was consistently acceptable for sites using nucleic acid technology (NAT), however performance by sites using rapid antigen detection (RAD) methods was poor, especially when testing the weakly positive samples. A root cause investigation of poor testing performance revealed gaps in the execution of testing methods and also in results interpretation. These quality issues were most commonly associated with new testers who lacked experience with diagnostic testing. Tester training and mentoring was reinforced as was retraining of personnel; sample processing instructions were modified, and a training video was also created for testing sites. As a result of these interventions, sites improved their testing accuracy and the performance of POCT sites using RAD methods came to more closely match the performance of sites utilizing NAT. Overall, the PT program was highly successfully and improved quality of testing in the province. This work demonstrates the critical value of an external quality assessment (EQA) partner towards improving patient and public health and safety, especially when testing is conducted outside of an accredited medical laboratory setting.

Laboratory error reporting rates can change significantly with year-over-year examination.

BACKGROUND: Incident reporting systems are useful tools to raise awareness of patient safety issues associated with healthcare error, including errors associated with the medical laboratory. METHODS: Previously, we presented the analysis of data compiled by the British Columbia Patient Safety & Learning System over a 3-year period. A second comparable set was collected and analyzed to determine if reported error rates would tend to remain stable or change. RESULTS: Compared to the original set, the second set presented changes that were both materially and statistically significant. Overall, the total number of reports increased by 297% with substantial changes between the pre-examination, examination and post-examination phases (χ2: 993.925, DF=20; p<0.00001). While the rate of change for pre-examination (clerical and collection) errors were not significantly different than the total year results, the rate of change for reporting examination errors rose by 998%. While the exact reason for dramatic change is not clear, possible explanations are provided. CONCLUSIONS: Longitudinal error rate tracking is a useful approach to monitor for laboratory quality improvement.

Medical laboratory associated errors: the 33-month experience of an on-line volunteer Canadian province wide error reporting system.

BACKGROUND: This article reports on the findings of 12,278 laboratory related safety events that were reported through the British Columbia Patient Safety & Learning System Incident Reporting System. METHODS: The reports were collected from 75 hospital-based laboratories over a 33-month period and represent approximately 4.9% of all incidents reported. RESULTS: Consistent with previous studies 76% of reported incidents occurred during the pre-analytic phase of the laboratory cycle, with twice as many associated with collection problems as with clerical problems. Eighteen percent of incidents occurred during the post-analytic reporting phase. The remaining 6% of reported incidents occurred during the actual analytic phase. Examination of the results suggests substantial under-reporting in both the post-analytic and analytic phases. Of the reported events, 95.9% were reported as being associated with little or no harm, but 0.44% (55 events) were reported as having severe consequences. CONCLUSIONS: It is concluded that jurisdictional reporting systems can provide valuable information, but more work needs to be done to encourage more complete reporting of events.

In vitro efficacy of N-acetylcysteine on bacteria associated with chronic suppurative otitis media.

BACKGROUND: The safety and efficacy of Ciprodex® has been demonstrated for treatment of chronic suppurative otitis media (CSOM). However, symptoms fail to resolve in 9-15% of patients. The objective of this study is to evaluate the efficacy of N-acetylcysteine (NAC) on S. aureus, and planktonic and sessile (biofilm forming) P. aeruginosa in vitro using clinical isolates from patients with CSOM. METHODS: 1) Stability was assessed using liquid chromatography-mass spectrometry for each component in a prepared mixture of Ciprodex® and NAC over 15 days. Sterility was assessed by measuring bacterial growth on a blood agar plate. Efficacy was assessed using a disc diffusion method by inoculating plates with S. aureus ATCC 29513 and P. aeruginosa ATCC 27853, and measuring the clearance zone.2) Fifteen P. aeruginosa strains were isolated from patients with CSOM and tested in vitro using the bioFILM PA™ antimicrobial susceptibility assay. Treatment solutions included Ciprodex® & ciprofloxacin +/- NAC, and NAC alone (0.25%, 0.5% & 1.25%). RESULTS: 1) NAC combined with Ciprodex® demonstrated stability, sterility, and efficacy over a two-week period2) P. aeruginosa strains in the sessile (33%-40%) and planktonic (13%) state demonstrated resistance to Ciprodex® and ciprofloxacin. When NAC ≥0.5% was used in isolation or as an adjunct to either of these medications, no resistance was found in the sessile or planktonic state among all 15 strains. CONCLUSION: 1) Ciprodex® combined with NAC has a shelf life of at least two weeks given the documented preservation of stability, sterility, and clinical efficacy of the mixed compounds.2) P. aeruginosa strains demonstrated resistance to both Ciprodex® and ciprofloxacin. NAC ≥0.5% overcomes issues with resistance and shows promise in the treatment of CSOM.

The effect of dissolved oxygen on the production and the glycosylation profile of recombinant human erythropoietin produced from CHO cells.

Human recombinant erythropoietin (rHuEPO) was produced from Chinese hamster ovary (CHO) cells transfected with the human EPO gene. The cells were grown in batch cultures in controlled bioreactors in which the set-points for dissolved oxygen varied between 3% and 200%. The cell-specific growth rate and final cell yield was significantly lower under hyperoxic conditions (200% DO). However, there was no significant difference in growth rates at other oxygen levels compared to control cultures run under a normoxic condition (50% DO). The specific productivity of EPO was significantly lower at a DO set-point of 3% and 200% but maintained a consistently high value between 10% to 100% DO. The EPO produced under all conditions as analyzed by two-dimensional electrophoresis showed a molecular weight range of 33 to 37 kDa and a low isoelectric point range of 3.5 to 5.0. This corresponds to a highly glycosylated and sialylated protein with a profile showing at least seven distinct isoforms. The glycan pattern of isolated samples of EPO was analyzed by weak anion exchange (WAX) HPLC and by normal-phase HPLC incorporating sequential digestion with exoglycosidase arrays. Assigned structures were confirmed by mass spectrometry (MALDI-MS). The most prominent glycan structures were core fucosylated tetranntenary with variable sialylation. However, significant biantennary, triantennary, and non-fucosylated glycans were also identified. Detailed analysis of these glycan structures produced under variable dissolved oxygen levels did not show consistently significant variations except for the ratio of fucosylated to non-fucosylated isoforms. Maximum core fucosylation (80%) was observed at 50% and 100% DO, whereas higher or lower DO levels resulted in reduced fucosylation. This observation of lower fucosylation at high or low DO levels is consistent with previous data reported for glycoprotein production in insect cells.