Synthesis of sodium titanates and their use in the photocatalytic degradation of NO.

The synthesis and characterization of sodium titanates (ST), and their evaluation in the photocatalytic reduction of nitric oxide (NO) are described herein. The materials were synthesized by a hydrothermal route using 5 M NaOH as the mineralizer agent and a TiO2 content of 0.06 mg/mL (expressed as the mass ratio of TiO2/mL of NaOH), at 170 °C for 48 h, resulting in sodium tri- and hexa-titanates. A nanotubular morphology was observed for the ST, as proved by scanning electron microscopy (SEM); a subsequent heat-treatment at 400 °C allowed a complete transformation of sodium tri- to hexa-titanates and an increase in bandgap. The obtained ST were impregnated with Ag+ and Zn+ cations, ST-Ag and ST-Zn, respectively, to tune the materials' bandgap. XPS analysis of the ST-Ag materials showed evidence of metallic Ag, pointing to the formation of silver nanoparticles, whereas for ST-Zn oxide phases were mainly spotted. The materials were evaluated for the photocatalytic reduction of NO using a reactor fed with a continuous flow rate of NO, generated in situ at a flow of 280 mL/min using nitrogen and a 253-nm UV irradiation source. The photocatalytic tests showed that pristine ST (tri- and hexa-titanates) displayed better performance in the reduction of NO with respect to the impregnated samples (ST-Ag, ST-Zn). Maximum degradation efficiencies of 80% were achieved when 1 g of photocatalyst was used with a flow of 280 mL/min and a 253 nm UV lamp.

Optimized Production of a Redox Metabolite (pyocyanin) by Pseudomonas aeruginosa NEJ01R Using a Maize By-Product.

Pseudomonas aeruginosa metabolizes pyocyanin, a redox molecule related to diverse biological activities. Culture conditions for the production of pyocyanin in a defined medium were optimized using a statistical design and response surface methodology. The obtained conditions were replicated using as substrate an alkaline residual liquid of cooked maize and its by-products. The untreated effluent (raw nejayote, RN) was processed to obtain a fraction without insoluble solids (clarified fraction, CL), then separated by a 30 kDa membrane where two fractions, namely, retentate (RE) and filtered (FI), were obtained. Optimal conditions in the defined medium were 29.6 °C, 223.7 rpm and pH = 6.92, which produced 2.21 µg mL-1 of pyocyanin, and by using the wastewater, it was possible to obtain 3.25 µg mL-1 of pyocyanin in the retentate fraction at 40 h. The retentate fraction presented the highest concentration of total solids related to the maximum concentration of pyocyanin (PYO) obtained. The pyocyanin redox behavior was analyzed using electrochemical techniques. In this way, valorization of lime-cooked maize wastewater (nejayote) used as a substrate was demonstrated in the production of a value-added compound, such as pyocyanin, a redox metabolite of Pseudomonas aeruginosa NEJ01R.