ABSTRACT
Protonic ceramic fuel cells (PCFCs) have become the most efficient, clean and cost-effective electrochemical energy conversion devices in recent years. While significant progress has been made in developing proton conducting electrolyte materials, mechanical strength and durability still need to be improved for efficient applications. We report that adding 5 mol% Zn to the Y-doped barium cerate-zirconate perovskite electrolyte material can significantly improve the sintering properties, mechanical strength, durability and performance. Using same proton conducting material in anodes, electrolytes and cathodes to make a strong structural backbone shows clear advantages in mechanical strength over other arrangements with different materials. Rietveld analysis of the X-ray and neutron diffraction data of BaCe0.7Zr0.1Y0.15Zn0.05O3-δ (BCZYZn05) revealed a pure orthorhombic structure belonging to the Pbnm space group. Structural and electrochemical analyses indicate highly dense and high proton conductivity at intermediate temperature (400-700 °C). The anode-supported single cell, NiO-BCZYZn05|BCZYZn05|BSCF-BCZYZn05, demonstrates a peak power density of 872 mW cm-2 at 700 °C which is one of the highest power density in an all-protonic solid oxide fuel cell. This observation represents an important step towards commercially viable SOFC technology.
ABSTRACT
The depletion of fossil fuels has been a greater concern to the world due to the demand for energy that tremendously increasing with urbanization and population growth. For sustainable development, power industries are trying to find suitable substitute of petroleum fuel which is environment friendly and economically feasible. The biomass such as the production of bio-oil from chicken litter could be a possible alternative source of energy. The conversion of the feedstock was conducted through a catalytic pyrolysis process in an ex-situ fixed bed reactor heated at 500 °C with a heating rate of 50 °C/min. Proximate, ultimate, and calorific analysis of the feedstock was studied using TGA/DTG analysis, CHNS, and bomb calorimeter, respectively. GCMS and py-GCMS experiments on the bio-oil showed that the HHV of the feedstock was 16.01 MJ/kg. The addition of catalyst improved the quality of the bio-oil yield. The presence of dolomite and ZMS-5 catalyst enhances the phenols and aromatic content, respectively. Biomass to catalyst (B/C) ratio increased the oil production from 43.6g to 51.9g for dolomite and 43.6g-47.1g for ZMS-5 with the B/C ration of 20g:3g. Elevating the B/C ratio increases the pyrolytic liquid yield with greater influence on the furanic compound.
Subject(s)
Chickens , Pyrolysis , Animals , Biofuels , Biomass , Catalysis , Hot Temperature , Plant Oils , PolyphenolsABSTRACT
The aim of this research is to characterize the invasive grass, Pennisetum purpureum, to evaluate the potentiality of the bioenergy production. Fourier transform infrared (FTIR) spectra are measured in order to understand the functional groups and their structure in the biomass. The thermogravimetric analysis (TGA) and the derivative thermogravimetric analysis (DTG) data are provided under Pyrolysis (N2) and combustion (O2) conditions to reveal the degradation pattern of the biomass. Differential scanning calorimetry (DSC) is the thermochemical process to measure the enthalpy changes pattern of the biomass. The original data presented in this work can be found in a research paper titled "Evaluation of the bioenergy potential of invasive Pennisetum purpureum through pyrolysis and thermogravimetric analysis", by Md Sumon Reza, Shafi Noor Islam, Shammya Afroze, Muhammad S. Abu Bakar, Rahayu S. Sukri, Saidur Rahman, and Abul K. Azad [1].
ABSTRACT
The data presented in this article are related to the formation of a novel layered perovskite oxide material, PrSrMn2O5+δ, through a solid-state synthesis route. Here, we present the high-resolution neutron powder diffraction and the X-ray powder diffraction data at room temperature. The new perovskite material crystallizes in the orthorhombic symmetry. Interpretation of this data can be found in a research article titled "Insight of novel layered perovskite PrSrMn2O5+δ: A neutron powder diffraction study" (Shammya et al., 2019) [1].
ABSTRACT
To evaluate the possibilities for biofuel and bioenergy production Acacia Holosericea, which is an invasive plant available in Brunei Darussalam, was investigated. Proximate analysis of Acacia Holosericea shows that the moisture content, volatile matters, fixed carbon, and ash contents were 9.56%, 65.12%, 21.21%, and 3.91%, respectively. Ultimate analysis shows carbon, hydrogen, and nitrogen as 44.03%, 5.67%, and 0.25%, respectively. The thermogravimetric analysis (TGA) results have shown that maximum weight loss occurred for this biomass at 357 °C for pyrolysis and 287 °C for combustion conditions. Low moisture content (<10%), high hydrogen content, and higher heating value (about 18.13 MJ/kg) makes this species a potential biomass. The production of bio-char, bio-oil, and biogas from Acacia Holosericea was found 34.45%, 32.56%, 33.09% for 500 °C with a heating rate 5 °C/min and 25.81%, 37.61%, 36.58% with a heating rate 10 °C/min, respectively, in this research. From Fourier transform infrared (FTIR) spectroscopy it was shown that a strong C-H, C-O, and C=C bond exists in the bio-char of the sample.
