Effect of nano-oxides on the color stability of maxillofacial silicone elastomers.

STATEMENT OF PROBLEM: A significant challenge of craniofacial prostheses is their limited service life because of degradation and color instability. In spite of improvements in the materials and techniques used for the fabrication of silicone maxillofacial prostheses, undesirable color change over time remains a challenge. Zn and Ti nano-oxides (nano-TiO2) have been reported to impart an ultraviolet- (UV) shielding property to silicone elastomers. However, studies examining the effects of nanopigments on the color stability of craniofacial prostheses are sparse. PURPOSE: The purpose of this in vitro study was to evaluate the color stability of a room-temperature vulcanizing (RTV) silicone elastomer with the addition of iron oxide and titanium dioxide nanopigments under accelerated artificial aging. MATERIAL AND METHODS: Sixty disks (Ø15×2 mm) were fabricated from RTV silicone 4408 Q. The specimens were divided into 5 groups containing iron oxide nanopigment, iron oxide nanopigment and rutile nano-TiO2 (as an opacifier), burnt sienna pigment, burnt sienna and nano-TiO2, and silicone without pigment or opacifier. The specimens were subjected to accelerated aging in a Xenotest chamber for 1000 hours. CIELab color coordinates and the total color difference (ΔE∗) values were determined before and after aging. ΔE∗ values were compared between the groups by using 1-way ANOVA and Tamhane multiple comparisons (α=.05), and a standard deviation of 1.09 was considered. RESULTS: ANOVA showed that the values of ΔE∗ differed among all groups (P<.05). The minimum amount of a color change perceived (ΔE∗ approximately =1.1) by the visual system as the threshold was observed in the specimens treated with burnt sienna and nano TiO2. The greatest color change occurred in the specimens treated with iron oxide nanopigment. As per the acceptable clinical threshold, the color change was satisfactory in all groups. CONCLUSIONS: Nano-TiO2 with burnt sienna groups had a lower color change than the other groups. The color change in all groups was within a clinically acceptable range.

The Role of Emergency Radiology in COVID-19: From Preparedness to Diagnosis [Formula: see text].

Emergency trauma radiology, although a relatively new subspecialty of radiology, plays a critical role in both the diagnosis/triage of acutely ill patients, but even more important in providing leadership and taking the lead in the preparedness of imaging departments in dealing with novel highly infectious communicable diseases and mass casualties. This has become even more apparent in dealing with COVID-19, the disease caused by the novel coronavirus SARS-CoV-2, first emerged in late 2019. We review the symptoms, epidemiology, and testing for this disease. We discuss characteristic imaging findings of COVID-19 in relation to other modern coronavirus diseases including SARS and MERS. We discuss roles that community radiology clinics, outpatient radiology departments, and emergency radiology departments can play in the diagnosis of this disease. We review practical methods to reduce spread of infections within radiology departments.

Evaluation of Tooth Surface Irradiated With Erbium: Yttrium Aluminum Garnet and Carbon Dioxide Lasers by Atomic Force Microscopy.

Introduction: Laser irradiation of dentin surface can affect its surface topography and roughness. Atomic force microscopy (AFM) is among the most efficient tools for determination of surface topography of natural biomolecules in nano-scales. Surface roughness affects plaque retention especially in the cervical region. This study aimed to assess and compare the obstruction of dentinal tubules and dentin surface roughness after irradiation of erbium: yttrium aluminum garnet (Er:YAG ) and CO2 lasers for treatment of dentin hypersensitivity (DH). Methods: Five disc-shaped samples measuring 3 mm in thickness were fabricated by horizontal sectioning of the cervical area of five extracted human molars using a low speed saw. Each disc was divided into 3 segments by a bur under water coolant. The three segments of each disc were placed on a glass slide. First segment: No intervention (control group). Second segment: Er:YAG laser irradiation (2940 nm, 50 mJ, 10 Hz and 0.5 W, 30 seconds) along with water coolant. Third segment: CO2 laser irradiation (10600 nm, 80 Hz, 0.3 W, 30 seconds) along with water coolant. After that, the surfaces underwent non-contact AFM. The diameters of dentinal tubules as well as surface roughness were then measured and statistically analyzed using repeated measures ANOVA. Results: The surface roughness parameters (Ra, Rq) showed increased roughness after laser irradiation and this increase in roughness after Er:YAG laser application was significant compared to the control group (P=0.048). However, CO2 laser caused no significant change in surface roughness. Also, after Er:YAG laser application, fewer open dentinal tubules were observed and the remaining open tubules had a smaller diameter. Conclusion: Based on the results, Er:YAG laser irradiation obstructs the dentinal tubules and increases the dentin surface roughness. This increase in surface roughness can cause microbial plaque retention and increase the risk of caries and periodontal disease. Application of CO2 laser (compared to Er:YAG) lead to slight but clinically significant obstruction of dentinal tubules and surface roughness.

Neutrophil-Lymphocyte Ratio in Different Stages of Breast Cancer.

Despite many advances in the treatment of breast cancer, it is still the second most common cause of death in women in the United States. It has been shown that inflammation plays a major role in the treatment of these cancers and inflammatory factors enhance tumor growth, invasion, metastasis, and vascularization. In this study, we would like to analyze peripheral blood neutrophil-lymphocyte ratio (NLR) in breast cancer patients and its correlation with disease staging. This cross-sectional analytic study was conducted in Imam Hospital, affiliated with Tehran University of Medical Sciences; a total of 195 female patients with breast cancer met the inclusion criteria. All of the patients had a complete blood count with leukocyte differential performed before chemotherapy. Medical records including pathology reports were also available. Data for all patients were collected prior to any surgical intervention. Exclusion criteria included clinical evidence of active infection, presence of hematological disorders, acute as well as chronic inflammatory or autoimmune diseases, or prior steroid therapy. Higher platelet count was significantly associated with the higher stage. The stage was not associated with the hemoglobin level. There was no association between the tumor size and age of patients with NLR. There was a significant relationship between NLR and IDC. There was a significant relationship between IDC and NLRs of less than 8.1 and greater than 3.3. There was a significant relationship between NLR and vascular invasion. There was no association between NLR and estrogen receptor and HER2. There was no significant relationship between the PLR and the cancer stage. In this study, NLR showed a significant relation with the disease staging. As the NLR increases the stage increases as well. Therefore, this ratio may be helpful in the preoperative evaluation of patients with breast cancer.

Comparison of Flexural Strength of Resin Cements After Storing in Different Media and Bleaching Agents.

The aim of this study was to determine the effects of different storage media and bleaching treatments on the flexural strength of two resin cements (Panavia and BisCem). One hundred rectangular-shaped specimens were prepared with two resin cements and were stored in five media types (n = 10): distilled water (DW), lactic acid (LA), sodium hydroxide (NH), in-office bleaching (OB) and home bleaching (HB). There was significant interaction between the solutions and cements (p < 0.05). The lowest three-point flexural strength was found in sodium hydroxide for both cements (p < 0.05). Both cements exhibited significant increase in flexural strength following home and in-office bleaching (except Panavia in OB) (p < 0.05) compared with immersion in distilled water. Panavia recorded significantly higher flexural strength compared with BisCem in all media (p < 0.002), with the exception of in-office bleaching.

Microleakage of different post systems and a custom adapted fiber post.

OBJECTIVE: The effects of closely adapting a prefabricated fiber to the post space remain unknown. The purpose of this study was to quantify the microleakages of a custom adapted fiber-reinforced post, a prefabricated quartz fiber post and a cast post using nondestructive methods. MATERIALS AND METHODS: Sixty-five extracted human premolars were endodontically treated and randomly divided into three groups (n=15), which were restored using a cast post-and-core, a custom adapted fiber post (Refropost) with a microhybrid microfiller resin composite (Gradia), or a prefabricated quartz fiber post (DT light post) and two groups of control (n=10). All groups were cemented using a dual polymerizing resin cement (Panavia F2.0). A composite core (Z100) was used for the fiber posts. The microleakage was calculated for the experimental and control groups before and after thermal cycling and cycling loading using a radiotracer solution (thallium 201 chloride) and a gamma counter device. Data were subjected to statistical analysis of ANOVA and Tukey HSD at significant level of P< 0.05. RESULTS: Significantly lower microleakage values were found for the cast post-and-core (mean value =16.04 ×10(4)) and custom adapted fiber post groups (mean value=14.36×10(4)). Thermal cycling and cyclic loading had no significant effect on the microleakage value of any tested group. CONCLUSION: Post systems with improved adaptation showed similar microleakage to casting posts.