The effect of population inversion saturation on the transverse mode instability threshold in high power fiber laser oscillators.

To achieve a 3.02 kW Yb-doped fiber laser oscillator, the behavior of transverse mode instability (TMI) is experimentally studied in different pumping configurations; co, hybrid, counter, and bidirectional. A comparative analysis showed that population inversion saturation has a substantial impact on TMI threshold enhancement in high power fiber oscillators. Monitoring the dynamic power exchange of fundamental mode and higher-order mode of laser output beam indicates that in a hybrid pumping scheme, simultaneous pumping with two different wavelengths enhances the TMI threshold to a great stand. Moreover, injecting a few watts of pumping light in the counter direction mitigates the TMI caused by pumping in the co-direction. Calculation of population inversion in different pumping configurations using simulation shows that higher population inversion saturation leads to increasing the TMI threshold.

Transverse mode instability threshold enhancement in Yb-doped fiber lasers by cavity modification.

To enhance the transverse mode instability (TMI) threshold of a fiber oscillator, a novel configuration is presented. In this configuration the oscillator cavity length is considerably reduced and the remaining active fiber is released out of the cavity to absorb the rest of the pump power and amplify the output signal of the cavity. In fiber oscillators, the index gratings generated by both forward and backward propagating signals can interact with light propagating in the backward and forward directions and degrade the output beam quality. In the proposed modified configuration, due to lower intra-cavity forward and backward signal power the index grating is smoothed and the TMI threshold is increased. Experimental results indicate that this modified configuration has a higher TMI threshold than a conventional fiber oscillator. Finally a higher TMI threshold is achieved in the bidirectional pumping scheme of the modified configuration.

Beam shaping design for coupling high power diode laser stack to fiber.

A beam shaping technique that rearranges the beam for improving the beam symmetry and power density of a ten-bar high power diode laser stack is simulated considering a stripe mirror plate and a V-Stack mirror in the beam shaping system. In this technique, the beam of a high power diode laser stack is effectively coupled into a standard 550 µm core diameter and a NA=0.22 fiber. By this technique, compactness, higher efficiency, and lower cost production of the diode are possible.

The dependence of the moving sonoluminescing bubble trajectory on the driving pressure.

With a complete accounting of hydrodynamic forces on the translational-radial dynamics of a moving single-bubble sonoluminescence, temporal evolution of the bubble trajectory is investigated. In this paper, by using quasi-adiabatic evolution for the bubble interior, the bubble peak temperature at the bubble collapse is calculated. The peak temperature changes because of the bubble translational motion. The numerical results indicate that the strength of the bubble collapse is affected by its translational movement. At the bubble collapse, translational movement of the bubble is accelerated because of the increase in the added mass force on the bubble. It is shown that the magnitude of the added mass force rises by the increase in the amplitude of the driving pressure. Consequently, the increase in added mass force results in the longer trajectory path and duration.