Development of a three-dimensional transmigration assay for testing cell--polymer interactions for tissue engineering applications.

The ability of synthetic or natural scaffolds to support invasion of cells from surrounding tissue is a key parameter for tissue engineering (TE). In this study, the migration of fibroblasts, chondrocytes, and osteoblasts into biodegradable polymer scaffolds was evaluated using a novel, three-dimensional (3-D) transmigration assay. This assay is based on a cell-populated contracted collagen lattice with a biodegradable polymer scaffold implanted at the center of the collagen gel. Cell migration into the scaffolds was assessed both quantitatively and qualitatively following various time lengths in culture using image analysis. Chondrocytes, incorporated within the collagen lattice, migrated into polymer scaffolds, when cultured both statically or in a rotating bioreactor. However, the bioreactor cultures resulted in a significantly greater cell invasion as compared to static cultures. There was a cell density-dependent osteoblast migration from collagen lattice into polymer scaffold, when tested in the transmigration assay. In addition, polymer scaffolds, treated with or without recombinant human platelet-derived growth factor (rh-PDGF-BB) were evaluated for fibroblast migration. The presence of rh-PDGF-BB resulted in significantly greater fibroblast invasion as compared to untreated scaffolds. Our studies suggest that the transmigration model provides a rapid system for testing cell invasion of potential scaffolds for tissue engineering applications.

The effect of peptide surface density on mineralization of a matrix deposited by osteogenic cells.

The density of Arg-Gly-Asp-containing peptides covalently grafted to solid materials has been shown to affect adhesion, spreading, and focal contact formation. The objective of this study was to examine the effect of ligand density on mineralization of the extracellular matrix deposited by osteoblasts. In particular, RGD-modified quartz surfaces with ligand densities varying over two orders (0.01-3.6 pmol/cm(2)) of magnitude were prepared to assess the long-term function of osteoblasts on peptide-derivatized surfaces. After 3 weeks in culture, surfaces modified with a 15 amino acid peptide (Ac-Cys-Gly-Gly-Asn-Gly-Glu-Pro-Arg-Gly-Asp-Thr-Tyr-Arg-Ala-Tyr-NH(2) ) at a density > or =0.62 pmol/cm(2) significantly (p<0.05) enhanced mineralization compared with a RGD surface density of 0.01 pmol/cm(2), RGE surfaces, or clean surfaces adsorbed with serum proteins. These results suggest that regulation of the surface density of adhesive ligands on biomaterial surfaces is a critical determinant in a strategy to alter the degree of extracellular matrix maturation in contact with solid surfaces (e.g., implants). Further studies are required to elucidate the intracellular signal transduction pathways that mediate long-term matrix mineralization through the initial engagement of these adhesive ligands.

Integrin subunits responsible for adhesion of human osteoblast-like cells to biomimetic peptide surfaces.

We have identified the integrin subunits responsible for the initial adhesion of human osteoblast-like cells to peptide-modified surfaces. Biomimetic peptide surfaces containing homogenous RGD (Arg-Gly-Asp), homogenous FHRRIKA (Phe-His-Arg-Arg-Ile-Lys-Ala), and a mixed ratio of FHRRIKA:RGD (25:75) were used to assess integrin-mediated adhesion. The RGD and FHRRIKA peptides were selected from the cell-binding and putative heparin-binding domains of bone sialoprotein. A panel of monoclonal antibodies against human alpha1, alpha2, alpha3, alpha4, alpha5, beta1, alpha(v), and alpha(v)beta3 was used to identify the subunits most dominant in mediating short-term (10 or 30 minutes) and long-term (4 hours) cell adhesion to the peptide surfaces. Anti-alpha2, anti-beta1, and anti-alpha(v) significantly (p < 0.05) diminished cell attachment to homogenous RGD surfaces following 30 minutes of incubation. After 4 hours of incubation on RGD-grafted surfaces, immunostaining of these integrin subunits revealed discrete localization of the alpha(v) subunit at the periphery of the cell (similar to focal contact points), whereas the alpha2 and beta1 subunits stained very diffusely throughout the cell. A radial-flow apparatus was used to determine the effect of anti-integrin antibodies on strength of cell detachment following 10 minutes of incubation on peptide-grafted surfaces. The strength of detachment from surfaces containing RGD was significantly reduced (p < 0.05) in the presence of anti-alpha2, anti-alpha(v), or anti-beta1 compared with controls (presence of preimmune mouse IgG). None of the antibodies significantly influenced cell attachment to homogenous FHRRIKA-grafted surfaces. These results demonstrate that initial (30 minutes) attachment of human osteoblast-like cells to homogenous RGD surfaces was mediated by the collagen receptor alpha2beta1 and the vitronectin receptor alpha(v)beta3, whereas only the vitronectin receptor governed longer term (longer than 30 minutes) adhesion (localization to focal contacts). The importance of distinct integrins in mediating the attachment of bone cells to RGD-immobilized surfaces indicates a strategy for engineering orthopaedic implants with a built-in surface specificity for cell adhesion.

Designing biomaterials to direct biological responses.

We have set forth a design strategy for creating biomimetic materials that direct the formation of tissue surrounding implants or regeneration within porous scaffolds. Our studies have established that heterogeneous mimetic peptide surfaces (MPS) containing both the -RGD- (cell-binding) and-FHRRIKA- (putative heparin-binding) peptides, unique to BSP, in the ratio of 75:25 (MPS II) or 50:50 (MPS III) proved to be more biologically relevant and specific for RCO cell function. The initial response of human osteoblast-like cells to these surfaces was mediated by the collagen (alpha 2 beta 1) and vitronectin receptors (alpha v beta 3), whereas the vitronectin receptor alone dominated longer-term events (> 30 min). MPS II and III surfaces enhanced cell spreading and long-term events such as mineralization of the extracellular matrix compared to homogenous peptide surfaces and controls. Furthermore, extensive mineralization of the ECM deposited by RCOs occurred when the peptide was coupled to an interfacial interpenetrating polymer network (IPN) that resisted protein deposition (i.e., non-specific adsorption) and fouling. Work on thermo-reversible P(NIPAAm-co-AAc) hydrogels demonstrated the ability to create materials that can be delivered to the body in a minimally invasive manner and support tissue regeneration. These hydrogels can be modified to incorporate biofunctional components such as the biomimetic peptides, theoretically enhancing their ability to foster tissue regeneration. These results suggest that biomaterials can be engineered to mimic ECM components of bone (e.g., various organs) by grafting peptides in the appropriate ratios of the cell and heparin-binding domains, and ultimately modulate the expression of the osteoblast cell phenotype. Approaches similar to the one presented in this work can be used to design materials for hybrid artificial organs and other tissues.

Biomimetic peptide surfaces that regulate adhesion, spreading, cytoskeletal organization, and mineralization of the matrix deposited by osteoblast-like cells.

In an effort to regulate mammalian cell behavior in contact with solid material surfaces, we have functionalized surfaces with different ratios of both the putative cell binding (-Arg-Gly-Asp-) domain and a consensus heparan-binding domain. The peptide sequences -Arg-Gly-Asp- (-RGD-) and -Phe-His-Arg-Arg-Ile-Lys-Ala- (-FHRRIKA-) or mixtures of the two in the ratios of 75:25 (mimetic peptide surface I), 25:75 (mimetic peptide surface II), and 50:50 (mimetic peptide surface III) were immobilized on model surfaces using a heterobifunctional cross-linker to link the peptide(s) to amine-functionalized quartz surfaces. Contact angle measurements, spectroscopic ellipsometry, and X-ray photoelectron spectroscopy were used to confirm the chemistry, thickness of the overlayers, and surface density of immobilized peptides ( approximately 4-6 pmol/cm2). The degree of rat calvaria osteoblast-like cell spreading, focal contact formation, cytoskeletal organization, proliferation, and mineralization of the extracellular matrix (ECM) on model biomaterial surfaces was examined. Mimetic peptide surface II (MPS II) and MPS III supported the highest degree of cell spreading (p < 0.05), following 4 h of incubation, compared to MPS I, homogeneous -RGD-, and homogeneous -FHRRIKA- grafted surfaces. Furthermore, MPS I, MPS II, MPS III, and homogeneous -RGD- surfaces promoted the formation of focal contacts and stress fibers by attached bone cells. The strength of bone cell detachment following 30 min of incubation was significantly higher (p < 0.05) on MPS II surfaces compared to homogeneous -RGD- and -FHRRIKA-. However, the degree of cell proliferation on the peptide surfaces were not significantly different from each other (p > 0.1). Following 24 d in culture, the areas of mineralized ECM formed on MPS II and MPS III surfaces were significantly (p < 0.05) larger than those of other surfaces. These results demonstrate that utilizing peptide sequences incorporating both cell- and heparin-adhesive motifs can enhance the degree of cell surface interactions and influence the long-term formation of mineralized ECM in vitro.

The detachment strength and morphology of bone cells contacting materials modified with a peptide sequence found within bone sialoprotein.

Adhesion, spreading, and focal contact formation of primary bone-derived cells on quartz surfaces grafted with a 15 amino acid peptide that contained a -RGD-(-Arg-Gly-Asp-) sequence unique to bone sialoprotein was investigated. The peptide surfaces were fabricated by using a heterbifunctional crosslinker, sulfosuccinimidyal 4-(N-maleimidomethyl)cyclohexane-1-carboxylate, to link the peptide to amine functionalized quartz surfaces. Contact angle measurements, spectroscopic ellipsometry, and X-ray photoelectron spectroscopy were used to confirm the chemistry and thickness of the overlayers. A radial flow apparatus was used to characterize cell detachment from peptide-grafted surfaces. After 20 min of cell incubation, the strength of cell adhesion was significantly (p < 0.05) higher on the -RGD- compared to -RGE- (control) surfaces. Furthermore, the mean area of cells contacting the -RGD- was significantly (p < 0.05) higher than -RGE- surfaces. Vinculin staining showed formation of small focal contact patches on the periphery of bone cells incubated for 2 h on the -RGD- surfaces; however, few or no focal contacts were formed by cells seeded on the -RGE-grafted surfaces. The methods of peptide immobilization utilized in this study can be applied to implants, biosensors, and diagnostic devices that require specificity in cell adhesion.

The role of vitronectin in the attachment and spatial distribution of bone-derived cells on materials with patterned surface chemistry.

In recent years a central objective of tissue engineering has been understanding the interaction of cells with biomaterial surfaces. In this study we examined the protein adsorption events necessary to control the attachment and the subsequent spatial distribution of bone-derived cells exposed to chemically modified surfaces. Silane chemistry and photolithography techniques were used to create substrates with alternating regions of an aminosilane, N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS), along side an alkylsilane, dimethyldichlorosilane (DMS), on quartz surfaces. Sera depleted of fibronectin (Fn), vitronectin (Vn), or both were used to determine if these proteins were necessary for the initial attachment and spatial distribution of bone-derived cells exposed to modified surfaces in vitro. The kinetics and mechanisms of the spatial distribution of cells were examined using light microscopy and digital image acquisition and subsequently were analyzed. Compared to complete serum, the use of serum depleted of fibronectin with vitronectin included had minimal effect on the cell attachment, spreading, and spatial distribution on the EDS regions of the surface. However, the use of serum depleted of vitronectin with or without fibronectin included resulted in greatly reduced cell attachment and spreading. Thus the presence of vitronectin was required for the attachment, spreading, and spatial distribution of bone-derived cells exposed to EDS/DMS-patterned surfaces.

A probabilistic approach to measure the strength of bone cell adhesion to chemically modified surfaces.

Patterned surfaces with alternating regions of amino silanes [N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS)] and alkyl silanes [dimethyldichlorosilane (DMS)] have been used to alter the kinetics of spatial distribution of cells in vitro. In particular, we have previously observed the preferential spatial distribution of bone cells on the EDS regions of EDS/ DMS patterned surfaces (10). In this study, we examined whether the mechanism of spatial distribution of cells on the EDS regions was adhesion mediated. Homogeneous layers of EDS and DMS were immobilized on quartz substrates and characterized by contact angle. X-ray photoelectron spectroscopy, and spectroscopic ellipsometry. The strength of bone cell attachment to the modified substrates was examined using a radial flow apparatus, within either 20 min or 2 hr of cell incubation in the presence of serum. A Weibull distribution was chosen to characterize the strength of cell-substratum adhesion. Within 20 min of cell exposure, the strength of adhesion was significantly larger on EDS and clean surfaces, compared with DMS surfaces (p < 0.001). Within 2 hr of cell incubation, there was no statistical difference between the strength of cell adhesion to EDS, DMS, and clean surfaces. The results of this study suggest that the surface chemistry mediates adhesion-based spatial cell arrangement through a layer of adsorbed serum proteins.

Kinetics of bone cell organization and mineralization on materials with patterned surface chemistry.

Materials with spatially resolved chemistries (i.e. patterned surfaces) have been used to guide and organize the position of mammalian cells in vitro. A common theme in guiding the spatial distribution of cells has been the use of patterned alkylsiloxanes, where one region contains an aminosilane and the other an alkylsilane. The regions of the aminosilane served as preferential sites for cell attachment and spreading, presumably dependent on the association between cell surface proteoglycans the positively charged amine. In this study, experiments were conducted with patterns of N-(2-aminoethyl)-3-aminopropyl-trimethoxysilane (EDS) and dimethyldichlorosilane (DMS) to determine the kinetics of spatial organization of bone-derived cells, and whether initial attachment and spreading affected the rate of matrix mineralization (i.e. bone formation) in extended cultures. The bone cells required the presence of serum or preadsorption of serum proteins to the patterned EDS/DMS surface to organize according to the lithographically defined surface chemistry. Time-lapse video microscopy indicated that cells were randomly distributed over the EDS/DMS surface at the time of plating, but organized on the EDS regions within 30 min. When cultures were extended for 15 and 25 days, the matrix synthesized by the cells was preferentially mineralized on the EDS chemistry. These results demonstrate the ability of surface chemistry modifications to organize cells and form mineralized tissue in vitro. The methods employed should have general value to the engineering of tissues in vitro.