Difference in Correction Power between Hybrid Lateral Closed-Wedge High Tibial Osteotomy and Medial Open-Wedge High Tibial Osteotomy was Associated with Severity of Varus Deformity and Different Hinge Distance from Center of Deformity.

Hybrid lateral closed-wedge high tibial osteotomy (HBHTO) carries certain advantages over medial open-wedge high tibial osteotomy (OWHTO). We investigated the potential difference in the required correction angle between HBHTO and OWHTO to achieve an equal amount of whole lower-extremity alignment correction, retrospectively analyzing the preoperative plain radiographic images of 100 patients. The medial proximal tibial angle (MPTA), joint line convergence angle (JLCA), mechanical lateral distal femoral angle (mLDFA), hip-knee-ankle axis (HKA), length of the tibia, width of the tibial plateau, length of the lower limb (leg length), and location of the center of deformity (CD) were measured. Differences in the required correction angle at the hinge point between the two techniques (CAD) were compared, and correlation analysis was performed to reveal the influential factors. The mean difference in CAD between HBHTO and OWHTO was 0.78 ± 0.22 (0.4~1.5)°, and mean WBL position change per correction angle was 3.9 ± 0.3 (3.0~4.6)% in HBHTO and 4.1 ± 0.3 (3.1~4.7)% in OWHTO. Correlation analysis revealed a strong positive correlation between CAD and HKA. mLDFA, JLCA, MPTA, leg length, OWCD, HBCD, and HCD were also significantly correlated with CAD. HBHTO required a 5.6% larger correction angle at the hinge point to achieve the same amount of alignment correction as OWHTO.

Objective Assessment of Perioperative Anxiety using Functional Near-infrared Spectroscopy in Elderly Patients: A Prospective Randomized Observational Pilot Study.

Background: Assessing and managing patient anxiety is essential to reduce postoperative complications in elderly patients. However, monitoring patient anxiety objectively is impossible. This study aimed to investigate the correlation between the level of fNIRS signals and anxiety in patients aged 65 and older undergoing artificial joint replacement surgery. Material and Methods: Sixty patients aged ≥65 years scheduled for elective total knee arthroplasty under spinal anesthesia were included. To differentiate the degree of anxiety, the patients were randomly divided into three groups, each consisting of 20 patients (group 1: administered normal saline as a placebo; groups 2 and 3: administered dexmedetomidine at a rate of 0.2 and 0.5 µg/kg/h, respectively, for 10 min). Functional near-infrared spectroscopy was measured continuously for 10 min in each session (session 1: pre-anesthetic period; session 2: immediately after the spinal anesthesia period; session 3: normal saline or dexmedetomidine receiving period) in all patients. Vital signs were measured thrice at 5-min intervals during each session. State-Trait Anxiety Inventory -S (STAI-S) and Ramsay Sedation Scale (RSS) scores were assessed at the end of each session. Results: The STAI-S score was significantly correlated with power of bandwidth (p = 0.034). In addition, the RSS score was significantly correlated with BW 1, 2, and 3 (p = 0.010, p < 0.001, and p = 0.003, respectively). Conclusion: The STAI-S score and BW 3 were significantly correlated, suggesting that fNIRS might help objectively and directly monitor anxiety levels.

Superior gluteal artery injury in pelvic ring injury and acetabular fracture: Single center observational study.

BACKGROUND: Intrapelvic hemorrhage following pelvic fractures, including pelvic ring and acetabular fractures, originates from the venous system and the fracture. Arterial injury often causes significant bleeding and hemodynamic instability. The superior gluteal artery (SGA) is a frequently injured artery in patients with pelvic fractures. This study investigated the incidence and pattern of SGA injuries associated with pelvic fractures. METHODS: We retrospectively reviewed the medical records of patients with pelvic fractures who visited our institution between January 2016 and April 2022. Patients who underwent angiography for suspected arterial injury and SGA embolization were identified. Furthermore, the demographics and patterns of pelvic fractures were evaluated. RESULTS: In total, 2042 patients with pelvic fractures visited our trauma emergency department and 498 patients (24.4%) underwent embolization for arterial injuries. Of these, 30 patients (1.5% of the total and 6.0% of the patients who underwent procedures) received embolization therapy of the main trunk of the SGA. The mean age of patients was 51.2 (23-85 years), and the injury mechanisms were all high-energy injuries. There were 19 pelvic ring injuries, eight acetabular fractures, and three combined injuries. Acetabular fractures involved mostly both columns. The three combined injuries were lateral compression involving both columns, vertical shear involving both columns, and lateral compression with T-type fractures. Twelve (40.0%) occurred through the sciatic notch of different patterns. CONCLUSIONS: SGA injury occurred in 1.5% of all pelvic fractures and was identified in 6% of patients receiving embolization. SGA injury occurs through various injury mechanisms and fracture patterns, even in the absence of a fracture in the sciatic notch. However, no conclusions could be drawn in this study on the association between SGA injuries, injury mechanisms, and fracture patterns. Since the prediction of SGA injury by fracture pattern is limited, angiography should be performed regardless of fracture pattern when an injury is suspected.

Comprehensive evaluation of artifact reduction and tissue recovery effects of metal artifact reduction technique based on full-reference metric.

For the comprehensive evaluation of metal artifact reduction (MAR) technique, not only the removal of metal artifacts but also the evaluation of the area restored by MAR is required. We propose a method to comprehensively evaluate the effect by MAR in this study. We have conducted the computed tomography scan to acquire both the evaluation image and the reference image for the full-reference based evaluation. The evaluation image and reference image were reconstructed into 24 image sets according to the tube potentials, image reconstruction method, and use of the MAR technique. Images of two different positions were selected according to the distance from metal and material (bone, tissue) distribution, and bone and tissue were automatically segmented in both evaluation and reference images. The values of full width at half the maximum (FWHM) and centroid were extracted after Gaussian modeling of each segmented region. Then, we computed four evaluation metrics (FWHMNM: non-MAR to non-metal ratio of FWHM, FWHMM: MAR to non-metal ratio of FWHM, CENTNM: non-MAR to non-metal ratio of centroid, CENTM: MAR to non-metal ratio of centroid), and the MAR image and non-MAR image were compared. The overlap ratio automatically segmented from the evaluation image and reference image were position 1 (bone: 99.61%, tissue: 99.23%) with 80 kVp, position 1 (bone: 99.32%, tissue: 99.56%) with 120 kVp, position 2 (bone: 99.20%, tissue: 99.73%) with 80 kVp, and position 2 (bone: 99.23%, tissue: 99.67%) with 120 kVp. The FWHMNM showing the change of image pixel value by metal artifact was calculated as (bone: 1.32-1.46, tissue: 1.08-1.16) at 80 kVp and (bone: 1.19-1.27, tissue: 1.02-1.05) at 120 kVp. More metal artifacts occurred at 80 kVp tube potential. Regardless of the tube potential and image reconstruction method, the MAR showed an overall artifact reduction effect (1 < FWHMM < FWHMNM). However, distortion of pixel values occurred due to the MAR in regions where metal artifacts were high in proximity to metal (1 < FWHMNM < FWHMM). Overall, the average value of the medium was maintained (CENTM: 0.98-1.03) after MAR application, but there was a change of image value in region around the metal (CENTM: 0.97-1.11). In this study, we propose a new method to evaluate the effect of metal artifacts and MAR technique using full-reference based method. Metal artifacts, effect of MAR technique, and side-effect caused by MAR technique were quantitatively analyzed through proposed method. There are some limitations in applying it to clinical imaging since our method is a reference-based evaluation. However, our experimental results were important for understanding the effects of the MAR technique and its functional properties.

Hybrid Lateral Closed-Wedge High Tibial Osteotomy Showed Similar Accuracy in Angular Correction and Reduction of Posterior Tibial Slope Compared to Opening-Wedge High Tibial Osteotomy: A Correction Angle Matched Cohort Study.

BACKGROUND: We aimed to compare the accuracy of applied correction angle between hybrid lateral closed wedge high tibial osteotomy (hybrid HTO) and medial open wedge high tibial osteotomy (OWHTO), and verify previous reports on hybrid HTO by matching correction angle between groups. Change in various radiological parameters including union rate were also compared. METHODS: A total of 50 OWHTO patients were selected for 2:1 propensity matching with 25 hybrid HTO patients. Rate of correction error was calculated by dividing the difference between the change in medial proximal tibial angle and preoperatively planned correction angle (PRD) by planned correction angle. Accuracy of angular correction was assessed using PRD and correction error rates. Hip-knee-ankle axis, mechanical lateral distal femoral angle, medial proximal tibial angle, joint line convergence angle, and length of the entire lower limb and tibia were measured. The Caton-Deschamps index (CDI) was used to assess change in patellar height. Serial postoperative radiographic analysis was performed to assess the union rate. RESULTS: The discrepancy between planned correction angle and real correction angle was 0.8 ± 2.3° in hybrid HTO and 1.1 ± 3.4° in OWHTO (P > .05), and the rate of error in osteotomy was similar between the groups approximately 6%. Postoperatively, posterior tibial slope (PTS) (P < .001), tibia length, and CDI (P < .001) were significantly different between groups. The amount of change in PTS (P < .001), tibia length in hybrid HTO (P < .001), and CDI (P < .001) were significantly different between groups. Union rate of osteotomy site was significantly faster in hybrid HTO than in OWHTO (P < .001). CONCLUSION: Hybrid HTO showed similar accuracy in angular correction compared to correction angle-matched OWHTO. Reduction in PTS, tibial shortening, maintained patellar height relative to the proximal tibia, and faster osteotomy site union were also confirmed in hybrid HTO.

Metal Artifact Reduction Dual-Energy CT as an Accurate and Reliable Method for Measuring Total Knee Arthroplasty Femoral Component Rotation Compared to Conventional CT.

This article determines the accuracy and reliability of dual-energy computed tomography (DECT) with metal artifact reduction (MAR) in the evaluation of femoral component rotation after total knee arthroplasty (TKA), in comparison with conventional CT images. A total of 49 patients (mean age, 69 years; 42 women) who underwent TKA between January 2019 and March 2020 were retrospectively enrolled. Femoral component rotation, including the anatomic and surgical transepicondylar axes, was evaluated with preoperative conventional CT and postoperative conventional CT and DECT with MAR. Surgical femoral component rotation was also assessed as a reference standard. Accuracy was assessed using paired t-test, and inter- and intraobserver reliability using intraclass correlation coefficients (ICCs) based on postoperative conventional CT and DECT with MAR. Clinical outcomes were evaluated using the Knee Society objective and functional scores. Accuracy of femoral component rotation was not significantly different from that of surgical rotation with both conventional CT and DECT with MAR. However, inter- and intraobserver reliability were better for DECT with MAR (ICC: 0.953-0.966) than for conventional CT (ICC: 0.641-0.749). The Knee Society objective and functional scores improved 1 year postoperatively. CONCLUSION: DECT with MAR showed accurate and more reliable results than did conventional CT in the evaluation of femoral component rotation after TKA.

Coronal plane femoral bowing in Far East Asians: implications for the strategy of distal femoral resection in total knee arthroplasty.

BACKGROUND: The accuracy of distal femoral resection in intramedullary (IM) guided total knee arthroplasty (TKA) depends on femoral morphology and varies according to individual anatomy. This study aimed to characterise coronal plane femoral bowing in Far East Asians according to age, sex, and severity of varus deformity to identify optimal strategies for distal femoral resection in TKA. METHOD: Femoral anatomical parameters in 656 patients (M/F = 232:424) were assessed using standing long-leg anteroposterior radiography which was fulfilling strict standard. The femur was divided into three longitudinal segments to measure the segmental anatomical axial deviation from the mechanical axis and intersegmental bowing. Coronal plane femoral bowing pattern was categorised based on combined gross bowing and distal bowing. RESULTS: Mean hip-knee-ankle angle; neck-shaft angle; proximal, middle, and distal segmental axial differences; mechanical lateral distal femoral angle; and femur length were 6.7 ± 6.8°, 125.0 ± 5.5°, 5.9 ± 1.7°, 6.1 ± 1.1°, 5.3 ± 1.6°, 88.4 ± 2.6°, and 432.3 ± 23.9 mm in male and 8.4 ± 5.5°, 126.4 ± 5.6°, 5.4 ± 1.5°, 6.6 ± 0.9°, 5.6 ± 1.6°, 89.3 ± 2.6°, and 410.6 ± 23.3 mm in female, respectively. Mean proximal, distal, and gross femoral bowing was 0.3 ± 1.8°, - 0.8 ± 1.8°, and - 0.5 ± 2.9° in male and 1.2 ± 1.6°, - 1.0 ± 1.6°, and 0.2 ± 2.7° in female, respectively. CONCLUSIONS: Grossly straight femur with a straight distal part was the most common femoral bowing pattern in Far East Asians. Distal bowing was proved to be a key factor to choose method for distal femoral resection in TKA. Using IM-guide to achieve accurate distal femoral resection in the femora with distal segmental axial deviation between 4-8° and distal bowing less than ± 1° is considered feasible.

Scattering and clustering the proximal screw construct in unilateral locking plate osteosynthesis of distal femoral fractures.

INTRODUCTION: The importance of fixation construct in locking compression plate (LCP) is not well enlightened until recently. The aim of this study was to investigate radiological and clinical outcomes of scattering and clustering of the proximal screw fixation construct in unilateral LCP treatment of the distal femoral fractures. MATERIALS AND METHODS: Patients who were treated for distal femoral fractures using unilateral LCP between January 2014 and December 2019 in our institute were included in this retrospective study. They were divided into groups 1 (35 cases, scattered proximal screw fixation) and 2 (35 cases, clustered proximal screw fixation). Mean follow-up period was 23.6 months for group 1 and 21.3 months for group 2. Medical history, patient demographics, injury characteristics, and surgical characteristics were reviewed and analyzed. Radiological findings including time to callus formation, bridging callus formation, union, and symmetry of the union were assessed and compared between the groups. Clinical outcomes included total blood loss during the operation, postoperative range of motion, and number of revision surgery. RESULTS: The time for callus formation (5.8 weeks in group 1 vs. 4.1 weeks in group 2, p = 0.009) and bridging callus formation (12.5 weeks in group 1 vs. 10.7 weeks in group 2, p = 0.009) was significantly earlier in group 2. Despite similar union rates between groups, the mean time for radiological union was longer in group 2 (10.7 vs 7.4 months, p = 0.001). Though statistically insignificant, more asymmetric union was observed in group 2 (17 vs 11 cases). CONCLUSIONS: Despite a delay in initial callus and bridging callus formation, scattering the proximal screws was better in achieving earlier and more balanced radiographic union than the clustered fixation. We recommend to avoid bridging more than five holes in the whole plate fixation construct to lessen the asymmetric callus formation and to prevent eventual plate breakage.

Surgical outcomes of transverse acetabular fractures and risk factors for poor outcomes.

BACKGROUND: Transverse acetabular fractures, although classified as elementary, have worse outcomes than other types of acetabular fractures. Prognostic factors for this fracture type are not clearly established. This study aimed to assess the surgical outcomes of transverse acetabular fractures and subtypes thereof and to investigate the prognostic factors. METHODS: Between 2014 and 2019, 39 patients (39 hips) had transverse fractures or subtypes thereof. We reviewed the surgical outcomes and evaluated patient factors, injury factors, and surgical factors in relation to osteoarthritis (OA) and conversion to total hip arthroplasty (THA). Additionally, we analyzed the cutoff values for postoperative residual gaps and steps. RESULTS: Twenty-three male patients and sixteen female with a mean age of 41.7 years (range, 18-78 years) were included. There were 29 satisfactory reductions (74.4%). Eleven hips (28.2%) developed OA, and five (12.8%) of them underwent THA. Dome impaction (odds ratio [OR], 41.173; 95% confidence interval [CI], 1.804-939.814; p = 0.020) and residual gaps (OR, 4.251; 95% CI, 1.248-14.479; p = 0.021) were correlated with poor outcomes. Residual gaps (≥3 mm) and residual steps (≥1 mm) were significantly associated with OA. CONCLUSIONS: Relatively poor reduction was found for transverse acetabular fractures and subtypes thereof. However, the rates of OA and conversion to THA were not high. Dome impaction and wide residual gaps were identified as risk factors for poor outcomes. The development of OA significantly increased if residual gap and step were more than 3 mm and 1 mm, respectively.

Hammock plating for comminuted inferior sleeve avulsion fractures of the patella: A surgical technique and clinical results.

Comminuted inferior sleeve avulsion fractures of the patella is a surgical challenge owing to the lack of directly purchasable bone fragments and the vulnerable patellar tendon below the displaced lip fragments. Despite the reports of various techniques to treat this fracture, still there is need for a new surgical technique to improve the reduction construct. The purpose of this article is to introduce Hammock plating, which is a surgical technique for comminuted inferior sleeve avulsion patella fractures that utilizes synthetic suture and a low-profile mini plate. The reduction construct provides an indirect reduction of the inferior sleeve fragments to form a hammock-like construct that embraces and lifts the lip fragments upward altogether that enables a firm bone-to-bone union. The advantages also include relatively simple and easy procedure with less injury to the fractured bone fragments and patellar tendon.

Multilevel Dysvascular Injury of the Hand: Replantation versus Revision Amputation.

BACKGROUND: Multilevel dysvascular injury of the hand can be treated with replantation or revision amputation. The authors compared both modalities regarding functional outcomes, patient-reported outcomes, and required resources, as relevant studies are scarce. METHODS: In this retrospective review of consecutive case series (replantation, n = 8; revision amputation, n = 11), clinical results and functional outcomes (including grip strength, range of motion, sensory recovery, and grip or pinch ability) were assessed. Patient-reported outcomes, required hospital resources, and treatment cost until 1 year after surgery were compared between both groups. RESULTS: Six patients used passive prostheses, two used body-powered prostheses, and three did not use a prosthesis in the revision amputation group. All patients in the replantation group could grip objects and had restored hands, with protective sensory recovery and substantial wrist motion, whereas six patients in the revision amputation group were unable to grip or pinch objects. Replantation was associated with superior patient-reported outcomes, but required more hospital resources and treatment costs. CONCLUSIONS: This study suggests that in the treatment of multilevel dysvascular injury of the hand, the surgical method should be chosen on a case-by-case basis. For better functional and patient-reported outcomes, replantation is preferred. Revision amputation can be performed in the absence of sufficient hospital resources and to reduce treatment cost. These findings can aid in the preoperative counseling of patients with multilevel dysvascular injury of the hand. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, III.

Effect of chronic kidney disease on outcomes of total joint arthroplasty: a meta-analysis.

BACKGROUND: This meta-analysis was conducted to evaluate the differences in preoperative comorbidities, postoperative mortality, the rate of periprosthetic joint infection (PJI), and revision rate after total joint arthroplasty (TJA) between patients with chronic kidney disease (CKD)(CKD group) and patients with normal kidney function (non-CKD group). METHODS: We searched MEDLINE, EMBASE, and the Cochrane Library for studies assessing the effect of CKD on TJA outcome. This meta-analysis included studies that (1) compared the outcomes of TJA between the CKD and non-CKD groups; (2) compared the outcomes of TJA based on CKD stage; and (3) evaluated the risk factors for morbidity or mortality after TJA. We compared the mortality, PJI, and revision rate between CKD and non-CKD groups, and between dialysis-dependent patients (dialysis group) and non-dialysis-dependent patients (non-dialysis group). RESULTS: Eighteen studies were included in this meta-analysis. In most studies that assessed preoperative comorbidities, the number and severity of preoperative comorbidities were reported to be higher in the CKD group than in the non-CKD group. The risk of mortality was found to be higher in the CKD and dialysis groups compared with the respective control groups. In the studies based on administrative data, the unadjusted odds ratio (OR) of PJI was significantly higher in the CKD group than in the non-CKD group; however, no significant difference between the groups was noted in the adjusted OR. After total hip arthroplasty (THA), the risk of PJI was higher in the dialysis group than in the non-dialysis group. No significant difference was noted between the groups in the rate of PJI following total knee arthroplasty. The revision rate did not significantly differ between the CKD and non-CKD groups in the studies that were based on administrative data. However, the unadjusted OR was significantly higher in the dialysis group than in the non-dialysis group. CONCLUSIONS: Preoperative comorbidities and mortality risk were higher in the CKD and dialysis groups than in their respective control groups. The risk of revision was greater in the dialysis group than in the non-dialysis group, and the risk of PJI in the dialysis group became even greater after THA. Surgeons should perform careful preoperative risk stratification and optimization for patients with CKD scheduled to undergo TJA.

A Comparison of Long-Term Outcomes of Computer-Navigated and Conventional Total Knee Arthroplasty: A Meta-Analysis of Randomized Controlled Trials.

BACKGROUND: It is not clear whether long-term outcomes differ between computer-navigated and conventional total knee arthroplasty. The purpose of this study was to perform a meta-analysis comparing the radiographic outcomes, the long-term functional outcomes, and survivorship between computer-navigated total knee arthroplasty and conventional total knee arthroplasty. METHODS: We searched MEDLINE, Embase, and the Cochrane Library to identify studies comparing long-term outcomes between computer-navigated total knee arthroplasty and conventional total knee arthroplasty. Randomized controlled trials with mean follow-up durations of >8 years were included. The meta-analysis compared radiographic outcomes (postoperative alignment), functional outcomes (range of motion and patient-reported outcomes), and survivorship of the 2 techniques. RESULTS: Nine studies were included. A meta-analysis of accuracy revealed better outcomes in computer-navigated total knee arthroplasty when compared with conventional total knee arthroplasty in terms of the sagittal alignment of the femoral component (risk ratio [RR], 0.69; [95% confidence interval (CI), 0.51 to 0.93]; p = 0.02) and the coronal alignment of the tibial component (RR, 0.75 [95% CI, 0.60 to 0.95]; p = 0.02). The mechanical axis of the lower extremity, the coronal alignment of the femoral component, and the sagittal alignment of the tibial component did not differ significantly between the 2 groups. The functional outcomes did not differ significantly between the 2 techniques. Both in terms of the revision rate and the incidence of aseptic loosening, there were no differences between the 2 techniques. CONCLUSIONS: Although computer-navigated total knee arthroplasty resulted in better outcomes in postoperative component alignment than conventional total knee arthroplasty, there were no significant differences in long-term functional outcomes and survivorship between the 2 techniques. To fully evaluate the utility of computer navigation in total knee arthroplasty, additional randomized controlled studies including diverse ethnic groups and countries, as well as studies evaluating the correlation between postoperative alignment and long-term survivorship, are necessary. LEVEL OF EVIDENCE: Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.

Hook plating in patella fractures.

PURPOSE: Tension band wiring is considered the standard treatment for patella fractures. However, it is limited for fractures with marginal involvement, comminution, and osteoporotic bone. Our experience indicates that these limitations can be overcome with the hook plate. We evaluated the radiographic and clinical outcomes in patients with patella fracture treated with hook plating. METHODS: We enrolled 30 patients who underwent hook plating for patella fracture at two institutions between 2013 and 2017. Fracture classification and surgical options were reviewed. Postoperative fracture gap and time to union as radiographic measurements, and complications, range of motion, and functional outcome with the Lysholm score as clinical outcomes, were evaluated retrospectively. RESULTS: Nine fractures were AO/OTA 34A1, three B1, one B2, two C1, nine C2, and six C3. All were closed fractures. There were 3 cases of revision, 4 with lateral or medial marginal fracture, 9 with isolated inferior pole fracture, and 14 with comminuted fracture. The average postoperative fracture gap was 0.4 (range, 0-2.0) mm, and bone union was achieved without additional intervention. The average time to union was 11.6 (range, 7-24) weeks. There were no complications, and no extension lag except in one case (10°). The average flexion was 138.5° (range, 110-145°). For functional outcomes, the average Lysholm score was 89.5 (range, 74-95), with 13 excellent, 14 good, 3 fair, and no poor cases. CONCLUSION: This study suggests that hook plating can result in good bone union and restored knee function in marginal or comminuted fractures of the patella.

Alcohol neurolysis of genicular nerve for chronic knee pain.

Radiofrequency neurolysis (RFN) of the genicular nerves has recently become accepted as an effective technique to alleviate knee pain particularly in patients with knee osteoarthritis (OA) or postoperative pain. However, genicular nerve RFN can produce high procedure and equipment costs, longer procedural times, procedure-related pain, and failure rate of over 25%. We are presenting two cases of alcohol neurolysis of the genicular nerve using fluoroscopy and ultrasonography in patients with knee OA or persistent postsurgical pain of the knee. Alcohol neurolysis of the genicular nerve with dual imaging modality can be a cheap, safe and effective method in patients with chronic knee pain.

Serial stab incision venous drainage technique for simple artery-only fingertip replantation.

PURPOSE: Fingertip replantation is a challenging and technically demanding procedure. A variety of venous drainage techniques have been attempted for successful fingertip replantation. We present a new venous drainage technique, known as serial multifocal incision for fingertip replantation. METHODS: Between 2006 and 2014, we performed 94 fingertip replantations without vein anastomosis. Eighty of the patients were male, and 14 were female, with an overall mean age of 42 years (range: 8-67 years). All patients suffered amputations distal to the distal phalanx joint (Ishikawa subzone I, II, or III). We performed only artery anastomosis. To relieve venous congestion, we incised the fingertip 2-3 mm using a number 11 scalpel blade and allowed the vein to drain naturally. We made small serial incisions every 2-3 days for 1 week. RESULTS: The overall success rate for this procedure was 90%, with 85 surviving digits. Two patients with partial necrosis and nine patients with complete loss needed a second operation. Two patients received blood transfusions with an average of 1.5 units, but both had an accompanying injury at another site. No one complained of nail deformity or wound infection. CONCLUSIONS: Various external bleeding techniques have been reported to yield good results. The serial stab incision venous drainage technique is a modified fish-mouth external bleeding technique that overcomes the disadvantages of published methods. This technique is simple, allows for easy control of venous drainage, and reduces the need for blood transfusions compared to other venous drainage techniques that cause large amounts of bleeding. We propose a new method, the serial stab incision venous drainage technique, which is effective and associated with high rates of survival.

Arthroscopic reduction of posterior cruciate ligament tibial avulsion fracture using two cross-linked pull-out sutures: A surgical technique and case series.

Surgical treatment of the posterior cruciate ligament (PCL) tibial avulsion fracture is challenging due to the deep-seated location of the lesion with complex adjacent anatomy and usually with small-sized bone fragment. We introduce a novel arthroscopic reduction technique using two cross-linked pull-out sutures (2XLPOS) through triple bone tunnels in posterior cruciate ligament (PCL) tibial avulsion fracture. Posterior trans-septal portal was established following the four standard arthroscopic portals. Bilateral margins of the PCL with 1∼2 mm margin from the border were penetrated using suture hook. Fiberwire sling tied with a No. 0 PDS knot was introduced anterior to the PCL by the two posteriorly pulled shuttle sutures. Three bone tunnels were drilled in the inferomedial, inferolateral, and apex edge of the avulsed tibial crater. Each end of the Fiberwire was drawn out through the inferomedial and inferolateral bone tunnel, respectively. Two ends of the No. 0 PDS were drawn out through the apex tunnel by the same manner. Fiberwire was tied on the anteromedial aspect of the proximal tibia with one strand of the No. 0 PDS placed underneath the Fiberwire knot. And, the No. 0 PDS loop was tied to complete cross-linking of pull-out construct. Arthroscopic reduction of PCL tibial insertion avulsion fracture using 2XLPOS technique was performed in eleven patients. Mean range of motion at the first postoperative year was 126.8°. Mean Lysholm score, Tegner activity scale, and IKDC was 69.2, 4.2, and 58.1, respectively. Posterior instability decreased from mean 12.6 mm preoperatively to 3.2 mm at 1-year postoperative follow up. Radiographic union of the fracture site was confirmed in 11 cases. Our new surgical technique yielded good clinical and radiological outcome, and we consider it is unique in utilizing two cross-linked sling type pull-out suture constructs and triple bone tunnels for their passage.

Transient retrograde interfragmentary compression technique in AO/OTA type 33-C distal femur fractures: A surgical technique and short-term radiographic follow up results.

Surgical treatment of AO/OTA type 33-C fractures is a therapeutic challenge despite advances in surgical instruments and techniques. We introduce a novel surgical technique named transient retrograde interfragmentary compression (TRIC) to help intraarticular fragment reduction in AO/OTA type 33-C fracture. We inserted a partial threaded 7.0-cannulated screw with a washer along the transepicondylar axis from the medial femoral epicondyle during the articular block reduction process of AO/OTA type 33-C fractures to strengthen the compressive force between the condylar fragments and to enhance the handling of the articular block fragment in the alignmental correction stage. Following the provisional reduction and fixation using lateral distal femur locking compression plate, TRIC screw was removed. Fifteen AO/OTA type 33-C distal femoral intraarticular fractures of thirteen patients were surgically treated using the TRIC technique. We analyzed the radiographic result of the patients by measuring the horizontal gap and vertical step-off in the postoperative radiographs. Mean horizontal fracture gap was 0.34 mm and mean vertical step-off between bicondylar fragments was 0.63 mm. The median value of the horizontal fracture gap and vertical step off was 0 and 0.46 mm, respectively. Mean time to union in the bicondylar fracture fragment was 9 week. TRIC is considered to be a valuable surgical reduction technique in the treatment of the AO/OTA 33-C type fractures.

Femoral Periprosthetic Fractures after Total Knee Arthroplasty: New Surgically Oriented Classification with a Review of Current Treatments.

PURPOSE: As the number of total knee arthroplasties (TKAs) increases, the incidence of femoral periprosthetic fractures after TKA is also increasing. This review aimed to suggest a new surgically oriented classification system for femoral periprosthetic fractures. METHODS: We investigated the classifications, and current treatment trends for femoral periprosthetic fractures after TKA by means of a thorough review of the relevant literature. RESULTS: Numerous studies reported good results of surgical treatment with modern fixatives including locking compression plates and retrograde intramedullary nails. However, few classifications of femoral periprosthetic fractures reflect the recent developments in surgical treatment. CONCLUSIONS: We recommend that surgical management be considered the first-line treatment for femoral periprosthetic fractures after TKA. Our new classification will help in deciding the surgical treatment option for femoral periprosthetic fractures after TKA.

Combined Rotational Alignment Change after Total Knee Arthroplasty in Different Tibial Component Designs: Implications for Optimal Tibial Component Rotational Alignment.

PURPOSE: The rotational alignment of the femoral and tibial components is closely related to the results after total knee arthroplasty (TKA). In this study, we measured the combined rotational alignment change (ΔCR) after TKA and compared the different influence of symmetric and asymmetric tibial component designs on the combined rotational alignment. MATERIALS AND METHODS: Eighty-four patients (mean age, 67.9 years) were included. A symmetric tibial component was used in 51 knees (group I), whereas an asymmetric tibial component was used in 50 knees (group II). We measured the angles of four anatomical landmarks by using preoperative and postoperative computed tomography images. The combined rotational alignment and the amount of change were calculated. The correlation between the isolated tibial component rotation (ITR) and ΔCR was analyzed by using the Spearman correlation coefficient. RESULTS: The mean ΔCR was -0.1°±6.3° in group I and -4.8°±5.7° in group II after TKA. Excluding the intercomponent rotation, the change was -1.0°±7.3° and -6.7°±6.7° in group I and group II, respectively. A correlation analysis between the ITR and tibial component rotation relative to the tibial tuberosity showed a statistically significant correlation. CONCLUSIONS: The combined lower limb rotational alignment was internally rotated in both symmetric and asymmetric tibial component designs after TKA. The asymmetric tibial component was better than the symmetric tibial component in achieving internally rotated combined lower limb rotational alignment. The internal rotation of the symmetric tibial component relative to the tibial tuberosity tip should fall within 20° to correct the externally deformed lower limb.