Growth of diazonium-functionalized ZnO nanoflakes on flexible carbon cloth for electrochemical sensing of acetone in the liquid phase.

Simple detection of acetone is indispensable due to its health and environmental concerns. Surface-modified electrodes are promising for the detection of acetone. In the present study, the facile fabrication of ZnO nanoflakes on carbon cloth (CC) is reported. The electrode was fabricated by decorating the CC with ZnO nanoparticles (ZnO NPs), followed by the hydrothermal treatment and modification with diazonium salt using linear sweep voltammetry (LSV) forming ZnO nanoflakes (ZnO NFs) on ZnO NPs/CC. The as-prepared ZnO/CC electrode was used for the detection of acetone at room temperature using cyclic voltammetry. Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) analyses were used for the chemical and physical characterization of the CC before and after each modification step. The obtained data manifested that ZnO NFs functionalized with diazonium salt increased the roughness of the CC surface, which was advantageous to promote the interaction between CC and acetone target. The modified sensing platform showed excellent performance in terms of the wide working range (0.1-2000 ppm) and low detection limit (0.03 ppm), making it a promising and cost-effective sensor of acetone in the liquid phase.

Fabrication of polydopamine decorated carbon cloth as support material to anchor CeO2 nanoparticles for electrochemical detection of ethanol.

A flexible CeO2 nanostructured polydopamine-modified carbon cloth (CeO2/PDA/CC) interface was fabricated via electrodeposition for ethanol detection. The fabrication method involved two consecutive electrochemical steps in which dopamine was firstly electrodeposited on carbon fibers, followed by the electrochemical growth of CeO2 nanoparticles. The CeO2/PDA-based electroactive interface exerts an impressive electrochemical performance on the flexible sensor due to strong synergistic effect of the PDA functionalization with more active sites. Moreover, catalytic activity of CeO2 nanostructures anchored on highly conductive CC incorporate superior electrocatalytic performance of the fabricated interface. The designed electrochemical sensor showed a wide response to ethanol in the linear range 1 to 25 mM with a detection limit of 0.22 mM. The CeO2/PDA/CC flexible sensor showed good anti-interference ability and excellent repeatability and reproducibility (RSD = 1.67%). The fabricated interface performed well in saliva samples with satisfactory recoveries, corroborating the viability of CeO2/PDA/CC integrated interface for practical implementation.

In-situ synthesized ZIF-67 graphene oxide (ZIF-67/GO) nanocomposite for efficient individual and simultaneous detection of heavy metal ions.

Heavy metals are ubiquitous in water bodies as a result of anthropogenic activities and over time they accumulate in body thus posing serious health problems. Therefore, it is essential to improve sensing performance, for determination of heavy metal ions (HMIs), of electrochemical sensors. In this work, cobalt-derived MOF (ZIF-67) was in-situ synthesized and incorporated onto the surface of graphene oxide (GO) by simple sonication method. The prepared material (ZIF-67/GO) was characterized by FTIR, XRD, SEM, and Raman spectroscopy. Afterwards, a sensing platform was made by drop-casting synthesized composite onto glassy carbon electrode for individual and simultaneous detection of heavy metal ions pollutants (Hg2+, Zn2+, Pb2+, and Cr3+) with estimated detection limits of 2 nM, 1 nM, 5 nM, and 0.6 nM, respectively, when determined simultaneously, that are below the permissible limit by World Health Organization. To the best of our knowledge, this is first report of HMIs detection by ZIF-67 incorporated GO sensor which can successfully determine the Hg+2, Zn+2, Pb+2, and Cr+3 ions simultaneously with lower detection limits.

N-Doped graphene quantum dots (N-GQDs) as fluorescent probes for detection of UV induced DNA damage.

UV induced DNA damage can lead to the development of skin cancer, skin aging and cell death. In this study, we fabricated a fluorescence-based biosensor that can be applied to the detection of DNA damage caused by UV radiation with the help of nitrogen doped graphene quantum dots (N-GQDs) as the probe material. In this paper, N-GQDs with good fluorescence efficiency have been synthesized by the hydrothermal method and were used as a fluorescent probe for the detection of UV damaged DNA. The fluorescence intensity of N-GQDs was quenched by the static quenching of UV damaged DNA through the formation of a N-GQD/UV damaged DNA complex. Moreover, the effects of different values of pH, NaCl and glucose on analytical performances of the sensor were also studied. Thus, using a fluorescence based approach, we demonstrated a quite simple, rapid, and inexpensive biosensor for the detection of DNA damage caused by UV radiation.

Non-enzymatic electrochemical sensing of dopamine from COVID-19 quarantine person.

The worldwide outbreak of COVID-19 pandemic, is not only a great threat to the victim life but it is leaving invisible devastating negative affect on mental health of quarantined individual because of isolation, depression, bereavement, and loss of income. Therefore, the precise monitoring catecholamine neurotransmitters specifically of dopamine (DA) is of great importance to assess the mental health. Thus, herein we have synthesized Co-based zeolitic imidazolate framework (ZIF-67) through solvothermal method for precise monitoring of DA. To facilitate the fast transportation of ions, highly conductive polymer, poly(3,4-ethylenedioxythiophene; PEDOT) has been integrated on the surface of ZIF-67 which not only provides the smooth pathway for ions/electrons transportation but also saves the electrode from pulverization. The fabricated ZIF-67/PEDOT electrode shows a significant sensing performance towards DA detection in terms of short diffusion pathways by expositing more active sites, over good linear range (15-240 µM) and a low detection limit of (0.04 µM) even in the coexistence of the potentially interfering molecules. The developed ZIF-67/PEDOT sensor was successfully employed for sensitive and selective monitoring of DA from COVID-19 quarantined person blood, thus suggesting reliability of the developed electrode.

Nickel -doped iron oxide nanoparticle-conjugated porphyrin interface (porphyrin/Fe2O3@Ni) for the non-enzymatic detection of dopamine from lacrimal fluid.

Herein, we synthesized nickel (Ni)-doped iron oxide nanoparticles (Fe2O3). The presence of the dopant afforded anchoring sites for the porphyrinic hetero cavity of 5,10,15,20-(tetra-4-carboxyphenyl)porphyrin to produce the porphyrin/Fe2O3@Ni composite. The crystalline structure and morphology of porphyrin/Fe2O3@Ni were assessed using various tools including Fourier transform spectroscopy (FTIR), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD) and Raman spectroscopy. Porphyrin/Fe2O3@Ni has proven to be an excellent dopamine (DA) probe material with good selectivity, reproducibility, stability and reliability owing to its clever morphology, which induces numerous active sites along with good active surface area. It consequently provides good accessibility to DA and allows for the smooth tunneling of electrons between the analyte and sensing interface. Meanwhile, the porphyrin molecules provide good carbon-based resilient support, inhibit the leaching of the electrode matrix and enhance electron shuttling, resulting in the robust oxidation of DA with amplified transduction signals. The designed porphyrin/Fe2O3@Ni interface showed a low detection limit (1.2 nm) with good sensitivity (1.2 nM) in the linear bounds of 10 µM to 3500 µM. Additionally, the interface was employed successfully to analyze DA from lacrimal fluid with good percentage recoveries (99.8% to 100.1%). We anticipate that such a design will simplify the in vitro screening of DA in rarely studied tear samples with sensitivity and selectivity.

DNA-templated electrodeposition of silver nanoparticles for direct and label-free aptasensing of ochratoxin A.

We present in this work, an aptasensing strategy based on the DNA-templated electrodeposition of silver nanoparticles (AgNPs). The homogeneous electro-deposition of AgNPs on screen printed carbon electrode (SPCE) surface was achieved based on a unique aptamer scaffold. This was constructed by immobilizing a DNA aptamer on SPCE by electrochemical oxidation of its amine groups. The electrodeposition of AgNPs was investigated before and after the addition of the aptamer's specific target; the mycotoxin, ochratoxin A (OTA). Electrochemical characterization by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) showed the effect of the scaffold layer on the electrodeposition of AgNPs. The conformational change induced by aptamer after binding its targeted molecule affects AgNPs electrodeposition and the electron transfer thus allowing OTA detection by cyclic voltammetry. The voltammograms showed a good proportionality between the analyte concentration and the current response. The constructed platform allowed the quantitative aptasensing of OTA within the range of (1.56-400 ng/mL) and the detection limit of 0.6 ng/mL. In term of aptasensor applicability, the proposed strategy showed excellent performance in rice samples.

Perylene diimide/MXene-modified graphitic pencil electrode-based electrochemical sensor for dopamine detection.

The synthesis of novel architecture comprising perylene diimide (PDI)-MXene (Ti3C2TX)-integrated graphitic pencil electrode for electrochemical detection of dopamine (DA) is reported. The good electron passage between PDI-MXene resulted in an unprecedented nano-adduct bearing enhanced electrocatalytic activity with low-energy electronic transitions. The anionic groups of PDI corroborated enhanced active surface area for selective binding and robust oxidation of DA, thereby decreasing the applied potential. Meanwhile, the MXene layers acted as functional conducive support for PDI absorption via strong H-bonding. The considerable conductivity of MXene enhanced electron transportation thus increasing the sensitivity of sensing interface. The inclusively engineered nano-adduct resulted in robust DA oxidation with ultra-sensitivity (38.1 µAµM-1cm-2), and low detection limit (240 nM) at very low oxidation potential (-0.135 V). Moreover, it selectively signaled DA in the presence of physiological interferents with wide linearity (100-1000 µM). The developed transducing interface performed well in human serum samples with RSD (0.1 to 0.4%) and recovery (98.6 to 100.2%) corroborating the viability of the practical implementation of this integrated system. Graphical abstract Schematic illustration of the oxidative process involved on constructed sensing interface for the development of a non-enzymatic dopamine sensor.

Copper oxide integrated perylene diimide self-assembled graphitic pencil for robust non-enzymatic dopamine detection.

Exploring a robust, extremely sensitive, cost-effective and reliable assay platform for the precise analysis of dopamine (DA) has become a big challenge predominantly at the clinical level. To participate in this quest, herein, we fabricated a perylene diimide (PDI) self-assembled graphitic surface of the graphitic pencil electrode (GPE) anchored copper oxide (CuO). The self-assembled N-rich PDI led to the fast movement of ions by decreasing the bandgap and improved the electron transport kinetics with more exposed catalytic active sites, thus resulting in the robust electrochemical sensing of DA. The designed sensor exhibited good sensitivity (4 µM-1 cm-2), high structural stability, repeatability and excellent reproducibility with an RSD value of 2.9%. Moreover, the developed system showed a wide linear range (5 µM to 500 µM) and reliable selectivity even in the presence of co-existing interferants, such as ascorbic acid and uric acid. The fabricated nanohybrid was eventually employed to analyze DA in spiked physiological fluids and provided satisfactory recoveries. The designed PDI-CuO based interface also showed a very low detection limit of 6 nM (S/N = 3), consequently confirming its suitability for clinical and biological applications.

N-Doped Graphene Oxide Decorated with PtCo Nanoparticles for Immobilization of Double-Stranded Deoxyribonucleic Acid and Investigation of Clenbuterol-Induced DNA Damage.

We demonstrate here a facile hydrothermal-assisted formation of PtCo alloy nanoparticles (NPs) and their simultaneous anchoring on the graphitic surface of N-doped graphene oxide (NGO). Doping induced nanopores in the carbon surface to facilitate the uniform and homogeneous anchoring of alloy nanoparticles. It was revealed that the formation of PtCo NPs on an NGO interface plodded excellent tendency toward double-stranded deoxyribonucleic acid (dsDNA). The dsDNA immobilization was enabled by the presence of several oxidation states of Pt and Co. The same property was further used to monitor the direct detection of dsDNA damage induced by clenbuterol via screen-printed carbon electrodes. Cyclic voltammetric and electrochemical impedance spectroscopic characterization traced well the dsDNA attachment on the modified electrode surface. Differential pulsed voltammetry was further used as a tool to monitor the characteristic guanine peak before and after incubating with clenbuterol used as a damage probe for the dsDNA. The findings can further be appurtenant in exploring dsDNA immobilization protocols and developing analytical methods for determination of various dsDNA damaging agents.

Thiol-ubiquinone assisted fragmentation of gold nanoparticles.

We report the spontaneous fragmentation of gold nanoparticles (AuNPs) induced, in aqueous solution at room temperature, by thiol derivative of ubiquinone, which involves the energetic electron injection from thiol-ubiquinone to the gold nanoparticles.