ABSTRACT
An alternative analytical method was developed for the quantification of inorganic arsenic (iAs) in rice by ICP OES. Iron nanoparticles modified with an organophosphorus compound were used as the solid phase for MSPE of iAs from the plant matrix. The MSPE procedure was performed using 4 mL of a buffer solution with pH 4.0, 20 mg of the nanomaterial, and a 15-min extraction time. The total As (tAs) by ICP OES was also quantified using the same MSPE procedure after solubilization of the samples by a block digester. The accuracy of tAs and iAs quantification was verified using CRM NIST 1568b (97 % and 101 % recovery, respectively). The precision (RSD < 15 %) and LOD and LOQ (1.08 and 3.70 µg kg-1, respectively) of the proposed method were satisfactory. The rice samples had tAs contents between 0.090 and 0.295 mg kg-1 and iAs mass fractions between 0.055 and 0.109 mg kg-1.
Subject(s)
Arsenic , Arsenicals , Oryza , Arsenic/analysis , Oryza/chemistry , Spectrum Analysis , Solid Phase Extraction/methods , Magnetic PhenomenaABSTRACT
A fast sample preparation procedure based on use of infrared (IR) assisted heating for mineralization of soybean derived samples has been developed for their subsequent multielement analysis by inductively coupled plasma optical emission spectrometry (ICP-OES) and flame atomic absorption spectrometry (FAAS). A cold finger was examined for refluxing of acid vapors to determine its impact on efficiency and economy of digestion. The optimized procedure, based on 1â¯g subsamples, 8â¯mL of HNO3 (65% w/w) and exposure of the mixture to a 500â¯W IR source for 5â¯min without refluxing, permitted accurate determination of all analytes in NIST SRM 1568b (rice flour). Detection limits using ICP-OES were (µg/kg) 97, 1.0, 39, 185, 0.47 and 1200 for Ca, Cu, Fe, K, Mn and P, respectively, and 18 for Zn by FAAS. The IR-assisted digestion approach provided a low cost, easy to use system having great potential for implementation in routine analysis of trace elements in soybean and similar matrices.
Subject(s)
Food Analysis/methods , Glycine max/chemistry , Trace Elements/analysis , Food Analysis/instrumentation , Gases/analysis , Heating/methods , Infrared Rays , Limit of Detection , Metals/analysis , Phosphorus/analysis , Spectrophotometry, Atomic/methodsABSTRACT
The characterization of inorganic elements in the produced water (PW) samples is a difficult task because of the complexity of the matrix. This work deals with a study of a methodology for dissolved Fe quantification in PW from oil industry by flame atomic absorption spectrometry (FAAS) after cloud point extraction (CPE). The procedure is based on the CPE using PAN as complexing agent and Triton X-114 as surfactant. The best conditions for Fe extraction parameters were studied using a Box-Behnken design. The proposed method presented a LOQ of 0.010µgmL-1 and LOD of 0.003µgmL-1. The precision of the method was evaluated in terms of repeatability, obtaining a coefficient of variation of 2.54%. The accuracy of the method was assessed by recovery experiments of Fe spiked that presented recovery of 103.28%. The method was applied with satisfactory performance to determine Fe by FAAS in PW samples.
Subject(s)
Iron/analysis , Oil and Gas Industry/methods , Spectrophotometry, Atomic/methods , Surface-Active Agents/chemistry , Wastewater/chemistry , Water Purification/methods , Brazil , Hydrogen-Ion Concentration , Iron/isolation & purification , Limit of Detection , Octoxynol , Oil and Gas Industry/standards , Polyethylene Glycols/chemistry , Reproducibility of ResultsABSTRACT
Paints, a complex matrix, have a variable composition that is dependent on the application. In this work, a new wet digestion procedure for the determination of Al, As, Ba, Cd, Cr, Cu, Mn, Ni, Pb, Sn, Sr, Ti and Zn in paint samples using inductively coupled plasma optical emission spectrometry (ICP OES) has been developed. An experimental design approach was employed to determine the optimal conditions for achieving complete solubilization and/or decomposition in the sample preparation method. An efficient sample preparation was developed that consisted of a pre-digestion step at 40°C for 20 min using 1 mL of HNO3 to eliminate organic solvents followed by digestion at 120°C for 3h using 5 mL of HCl and 1 mL of HF in a block digestion. The proposed procedure promotes the complete solubilization of different bases of paints at low temperature and atmospheric pressure. The accuracy was determined by addition/recovery tests and comparing the results with those obtained using the ASTM D335-85a standard sample preparation method. The limits of quantification were 1.78, 0.11, 0.006, 0.006, 0.01, 0.04, 0.006, 0.006, 0.02, 0.07, 0.30, 1.30 and 0.30 mg kg(-1) for Al, As, Ba, Cd, Cr, Cu,Mn, Ni, Pb, Sn, Sr, Ti and Zn, respectively. The proposed method was applied for the analysis of inorganics via the ICP OES of paints with different colors and bases used to cover wall surfaces.
