ABSTRACT
PURPOSE: To determine the curing potential and color stability of resin-based luting materials for aesthetic restorations. MATERIAL AND METHODS: Four resin-based luting agents were tested: traditional dual-activated resin cement (RelyX ARC, ARC), amine-free dual-activated resin cement (RelyX Ultimate, ULT), light-activated resin cement (RelyX Veneer, VEN), and pre-heated restorative resin composite (Filtek Supreme, PHC). Degree of C=C conversion was determined by infrared spectroscopy (n=3) with direct light exposure or with interposition of 1.5-mm-thick ceramic (e.max Press HT) between the luting material and light. The curing potential considered the ratio between these two scenarios. Color difference (n=6) was determined by CIELAB (ΔEab) and CIEDE2000 (ΔE00) methods, by spectrophotometer measurements made 24h after photoactivation and 90 days after storage in water. Data was submitted to ANOVA and Tukey's test (α=0.05). RESULTS: The luting agents affected both conversion and color stability. With ceramic, ARC produced the highest conversion among the tested groups (75±1%) and the pre-heated composite (PHC) the lowest one (51±3%), but the curing potential was similar for all materials. ULT produced lower ΔEab than ARC. PHC presented the lowest color difference when considered both CIELAB and CIE2000 methods (ΔEab 2.1±0.4; ΔE00 1.6±0.2). SIGNIFICANCE: All luting strategies presented high curing potential. Amine-free dual-activated material was able to reduce color difference than that formulated with the amine component. Pre-heated composite produced the least color variation after storage.
