Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 69
Filter
1.
J Am Heart Assoc ; : e035264, 2024 Jul 03.
Article in English | MEDLINE | ID: mdl-38958130

ABSTRACT

BACKGROUND: 123Iodine-meta-iodobenzylguanidine scintigraphy is useful for assessing cardiac autonomic dysfunction and predict outcomes in heart failure (HF). The relationship of cardiac sympathetic function with myocardial remodeling and diffuse fibrosis remains largely unknown. We aimed to evaluate the cardiac sympathetic function of patients with HF and its relation with myocardial remodeling and exercise capacity. METHODS AND RESULTS: Prospectively enrolled patients with HF (New York Heart Association class II-III) were stratified into HF with preserved left ventricular ejection fraction [LVEF] ≥45%) and reduced LVEF. Ventricular morphology/function and myocardial extracellular volume (ECV) fraction were quantified by cardiovascular magnetic resonance, global longitudinal strain by echocardiography, cardiac sympathetic function by heart-to-mediastinum ratio from 123iodine-meta-iodobenzylguanidine scintigraphy. All participants underwent cardiopulmonary exercise testing. The cohort included 33 patients with HF with preserved LVEF (LVEF, 60±10%; NT-proBNP [N-terminal pro-B-type natriuretic peptide], 248 [interquartile range, 79-574] pg/dL), 28 with HF with reduced LVEF (LVEF, 30±9%; NT-proBNP, 743 [interquartile range, 250-2054] pg/dL) and 20 controls (LVEF, 65±5%; NT-proBNP, 40 [interquartile range, 19-50] pg/dL). Delayed (4 hours) 123iodine-meta-iodobenzylguanidine heart-to-mediastinum ratio was lower in HF with preserved LVEF (1.59±0.25) and HF with reduced LVEF (1.45±0.16) versus controls (1.92±0.24; P<0.001), and correlated negatively with diffuse fibrosis assessed by ECV (R=-0.34, P<0.01). ECV in segments without LGE was increased in HF with preserved ejection fraction (0.32±0.05%) and HF with reduced left ventricular ejection fraction (0.31±0.04%) versus controls (0.28±0.04, P<0.05) and was associated with the age- and sex-adjusted maximum oxygen consumption (peak oxygen consumption); (R=-0.41, P<0.01). Preliminary analysis indicates that cardiac sympathetic function might potentially act as a mediator in the association between ECV and NT-proBNP levels. CONCLUSIONS: Abnormally low cardiac sympathetic function in patients with HF with reduced and preserved LVEF is associated with extracellular volume expansion and decreased cardiopulmonary functional capacity.

2.
Plast Reconstr Surg Glob Open ; 12(6): e5873, 2024 Jun.
Article in English | MEDLINE | ID: mdl-38841533

ABSTRACT

Background: The umbilicus detachment and reinsertion in umbilical float mini-abdominoplasty results in its lower position with or without shape distortion. This event creates a stigmatizing look, elongating the upper abdomen and creating variable grades of infra umbilical/pubis bulging. This lack of proportion causes an unpleasant, artificial look, and is very difficult to fix. The study aimed to describe a sequence of abdominoplasty and combined upper abdomen horizontal muscle plications to correct umbilicus malposition after a mini-abdominoplasty. Methods: Over a period of 24 months, 12 patients underwent a liposuction (suction-assisted liposuction) and abdominoplasty with horizontal supraumbilical muscle plication. All patients underwent objective measurements before and after the procedure, using digital image measurements by Mirror Image software, version 6.0 (Fairfield, N.J.). The follow-up evaluation was performed 12 months postoperatively. Statistical analysis was performed using IBM SPSS Statistics V26. Results: Over 24 months, 12 patients (100%), who underwent abdominoplasty combined with horizontal plication in the upper abdominal wall, have shown adequate umbilicus elevation (2.98 ± 0.242 cm; 95% confidence level), restoring the abdominal muscle wall proportion at 12 months follow-up. One patient (8%) had a seroma, and one (8%) had a small muscular hernia (1.5 cm) in the lower abdomen. Conclusions: The combination of abdominoplasty and upper horizontal muscle plication can fix the malpositioned umbilicus, restoring the aesthetic and anatomic proportions in those patients who underwent an umbilical float mini-abdominoplasty.

3.
Aesthetic Plast Surg ; 2024 Jun 20.
Article in English | MEDLINE | ID: mdl-38902340

ABSTRACT

INTRODUCTION: This study elucidates the application of Medium Definition Liposuction Abdominoplasty, a novel technique for achieving well-defined abdominal contours. The technique focuses on revealing the patient's inherent muscular volume and form by creating thinner flaps compared to traditional liposuction methodologies. METHODS: Objective evaluations of the abdominal wall's configuration were systematically executed both pre- and post-intervention for each participant. Digital image measurements facilitated by an image software constituted the basis for these assessments. The Body Fat Index was computed using precise measurements from seven distinct anatomical sites, with two measurements taken at each site and subsequently averaged. RESULTS: Over a span of 63 months, 300 patients underwent this combined procedure, resulting in discernible enhancements in the configuration of their abdominal walls in 97.6% of cases. However, complications such as partial diminution of tension in the muscular wall (2%), distal flap necrosis (0.6%), and minor muscular hernia (0.3%) were observed. CONCLUSION: The employment of combined muscle plication emerges as an efficacious methodology in meticulously rectifying alterations inherent within the muscular aponeurotic abdominal wall. This technique ensures the preservation of the original anatomical structure and functional dynamics, thereby circumventing the manifestation of local distortions that may arise from inadequate or excessive corrections. BULLET POINTS: The study introduces a novel technique, Medium Definition Liposuction Abdominoplasty, for achieving well-defined abdominal contours. This technique focuses on revealing the patient's inherent muscular volume and form by creating thinner flaps compared to traditional liposuction methodologies. Objective evaluations of the abdominal wall's configuration were systematically executed both pre- and post-intervention for each participant. The Body Fat Index was computed using precise measurements from seven distinct anatomical sites. Over a span of 63 months, 300 patients underwent this combined procedure, resulting in discernible enhancements in the configuration of their abdominal walls in 97.6% of cases. This technique ensures the preservation of the original anatomical structure and functional dynamics, thereby circumventing the manifestation of local distortions that may arise from inadequate or excessive corrections. LEVEL OF EVIDENCE III: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

4.
Sci Rep ; 14(1): 10841, 2024 05 12.
Article in English | MEDLINE | ID: mdl-38736010

ABSTRACT

Optimizing early breast cancer (BC) detection requires effective risk assessment tools. This retrospective study from Brazil showcases the efficacy of machine learning in discerning complex patterns within routine blood tests, presenting a globally accessible and cost-effective approach for risk evaluation. We analyzed complete blood count (CBC) tests from 396,848 women aged 40-70, who underwent breast imaging or biopsies within six months after their CBC test. Of these, 2861 (0.72%) were identified as cases: 1882 with BC confirmed by anatomopathological tests, and 979 with highly suspicious imaging (BI-RADS 5). The remaining 393,987 participants (99.28%), with BI-RADS 1 or 2 results, were classified as controls. The database was divided into modeling (including training and validation) and testing sets based on diagnostic certainty. The testing set comprised cases confirmed by anatomopathology and controls cancer-free for 4.5-6.5 years post-CBC. Our ridge regression model, incorporating neutrophil-lymphocyte ratio, red blood cells, and age, achieved an AUC of 0.64 (95% CI 0.64-0.65). We also demonstrate that these results are slightly better than those from a boosting machine learning model, LightGBM, plus having the benefit of being fully interpretable. Using the probabilistic output from this model, we divided the study population into four risk groups: high, moderate, average, and low risk, which obtained relative ratios of BC of 1.99, 1.32, 1.02, and 0.42, respectively. The aim of this stratification was to streamline prioritization, potentially improving the early detection of breast cancer, particularly in resource-limited environments. As a risk stratification tool, this model offers the potential for personalized breast cancer screening by prioritizing women based on their individual risk, thereby indicating a shift from a broad population strategy.


Subject(s)
Breast Neoplasms , Machine Learning , Humans , Breast Neoplasms/blood , Breast Neoplasms/diagnosis , Breast Neoplasms/pathology , Female , Middle Aged , Retrospective Studies , Adult , Aged , Blood Cell Count/methods , Risk Assessment/methods , Early Detection of Cancer/methods , Brazil/epidemiology
5.
Heliyon ; 10(6): e27206, 2024 Mar 30.
Article in English | MEDLINE | ID: mdl-38515724

ABSTRACT

Background and aims: Cardiomyocyte hypertrophy and interstitial fibrosis are key components of myocardial remodeling in Heart Failure (HF) with preserved (HFpEF) or reduced ejection fraction (HFrEF). MicroRNAs (miRNAs) are non-coding, evolutionarily conserved RNA molecules that may offer novel insights into myocardial remodeling. This study aimed to characterize miRNA expression in HFpEF (LVEF ≥ 45%) and HFrEF (LVEF < 45%) and its association with myocardial remodeling. Methods: Prospectively enrolled symptomatic HF patients (HFpEF:n = 36; HFrEF:n = 31) and controls (n = 23) underwent cardiac magnetic resonance imaging with T1-mapping and circulating miRNA expression (OpenArray system). Results: 13 of 188 miRNAs were differentially expressed between HF groups (11 downregulated in HFpEF). Myocardial extracellular volume (ECV) was increased in both HF groups (HFpEF 30 ± 5%; HFrEF 30 ± 3%; controls 26 ± 2%, p < 0.001). miR-128a-3p, linked to cardiac hypertrophy, fibrosis, and dysfunction, correlated positively with ECV in HFpEF (r = 0.60, p = 0.01) and negatively in HFrEF (r = -0.51, p = 0.04). miR-423-5p overexpression, previously associated HF mortality, was inversely associated with LVEF (r = - 0.29, p = 0.04) and intracellular water lifetime (τic) (r = -0.45, p < 0.05) in both HF groups, and with NT-proBNP in HFpEF (r = -0.63, p < 0.01). Conclusions: miRNA expression profiles differed between HF phenotypes. The differential expression and association of miR-128a-3p with ECV may reflect the distinct vascular, interstitial, and cellular etiologies of HF phenotypes.

6.
J Mech Behav Biomed Mater ; 151: 106394, 2024 Mar.
Article in English | MEDLINE | ID: mdl-38218045

ABSTRACT

This in vitro study assessed the effectiveness of three cleaning protocols (air-water spray, 37% phosphoric acid, or Ivoclean) on lithium disilicate restorations' fatigue behavior after try-in paste application, compared to a clean condition. Lithium disilicate discs (IPS e.max CAD, Ivoclar) with Ø-= 12 mm and 1 mm thickness were prepared from prefabricated CAD-CAM blocks, polished, subjected to CAD-CAM milling topography simulation and crystallization. After, etching with 5% hydrofluoric acid and the application of try-in paste (Variolink try-in paste shade white; load of 2.5 N for 5 min) was performed. Discs that received try-in paste were divided into three groups according to the removal protocol: SPRAY - air-water spray for 30 s; HPO - active application of 37% phosphoric acid for 60 s; IVOC - application of Ivoclean for 20 s. Control group (CTRL group) did not receive the try-in paste application. Half of the specimens (n= 15) were tested in the baseline condition (24 h up to 7 days), and the others underwent 25,000 thermal cycles (5 - 55 °C) + 210 days of distilled water storage (37 °C). Additional specimens (n= 3) underwent monotonic testing (1 mm/min). Fatigue testing involved a cyclic fatigue approach (20 Hz, initial load = 100 N - 5000 cycles, step size = 50 N - 10,000 cycles) until a visible crack appeared. Fractographic and topographic analyses were performed. Fatigue data were statistically analyzed with two-way ANOVA, Kaplan-Meier log-rank (Mantel-Cox), and independent t-test (α= 0.05). In the baseline condition, the IVOC group resulted in a superior fatigue behavior compared to the CTRL and SPRAY groups, but similar to the HPO group. The HPO and SPRAY presented a similar fatigue behavior to the CTRL group. It was noticed a decrease in fatigue behavior after aging, which resulted in all the cleaning protocols leading to similar fatigue behavior compared to the CTRL group. On the SPRAY group surface, try-in pastes remnants were noticed. In summary, despite a detrimental impact at baseline conditions, all tested cleaning protocols seem proper to remove the try-in paste from the ceramic's surface in the long-term evaluation.


Subject(s)
Ceramics , Dental Porcelain , Phosphoric Acids , Surface Properties , Materials Testing , Ceramics/chemistry , Computer-Aided Design , Water , Dental Stress Analysis
7.
Cien Saude Colet ; 28(8): 2377-2384, 2023 Aug.
Article in Portuguese, English | MEDLINE | ID: mdl-37531545

ABSTRACT

Smoking is a public health problem associated with high morbimortality. Smoking cessation services, although effective, have limited reach and have been compromised by the pandemic. This study aimed to analyze the care for smokers in João Pessoa (PB), Brazil, during the COVID-19 pandemic. A descriptive, exploratory, and quantitative study was conducted in two phases: a survey of health indicators and an evaluation of sociodemographic profiles of professionals and service clients during the study years. Seven professionals, smoking group coordinators, and 20 clients participated in the research. The results showed low program coverage, with a declining number of smokers treated during the pandemic, down from 419 in 2019 to 129 in 2020. Interviews identified the program's positive aspects and limitations, good effectiveness, and low access, especially in primary health care. Tobacco consumption and risk reduction strategies during the COVID-19 pandemic originated from services and professionals involved. We can conclude that the National Tobacco Control Program has an incipient implementation in primary health care in this region and that the number of services offered was reduced during the pandemic, decreasing demand and actions.


O tabagismo é um problema de saúde pública, está associado a uma elevada morbimortalidade. Os serviços de saúde vigentes para a cessação tabágica, apesar de efetivos, apresentam alcance limitado e foram comprometidos pela pandemia. O estudo teve como objetivo analisar o cuidado com a pessoa tabagista em João Pessoa (PB), na pandemia de COVID-19. Foi realizado um estudo descritivo, exploratório e quantitativo com duas fases: levantamento dos indicadores de saúde e avaliação dos perfis sociodemográficos dos profissionais e usuários dos serviços nos anos do estudo. Participaram da pesquisa sete profissionais, coordenadores de grupo de tabagismo e 20 usuários. Os resultados apontaram para uma baixa cobertura do programa, além de revelar queda no número de fumantes atendidos na pandemia, de 419 em 2019 para 129 em 2020. As entrevistas identificaram pontos positivos e limitações do programa, boa efetividade e baixo acesso, especialmente na APS, e que as estratégias utilizadas para conter o consumo do tabaco e seus riscos durante a pandemia partiram dos serviços e dos profissionais envolvidos. É possível concluir que, nessa região, o Programa Nacional de Controle do Tabagismo (PNCT) apresenta implantação incipiente na APS e que, durante a pandemia, o número de serviços ofertados foi reduzido, diminuindo a procura e as ações realizadas.


Subject(s)
COVID-19 , Smoking Cessation , Humans , Smoking Cessation/methods , Brazil/epidemiology , Pandemics , Smoking/epidemiology
8.
J Prosthet Dent ; 130(3): 392.e1-392.e9, 2023 Sep.
Article in English | MEDLINE | ID: mdl-37516645

ABSTRACT

STATEMENT OF PROBLEM: The color of monolithic zirconia restorations is obtained by presintering or postsintering coloring techniques. However, studies on the differences in surface characteristics and their influence on color stability are lacking. PURPOSE: The purpose of this in vitro study was to evaluate the influence of shading and staining techniques for a zirconia ceramic on the surface characteristics and colorimetric parameters (color difference, translucency, and whiteness index) after exposure to coffee or red wine and then polishing. MATERIAL AND METHODS: Ceramic disks (N=30; Ø10×1mm) were allocated into 3 groups: preshaded-shaded by the manufacturer (IPS e.max ZirCAD MT, shade A2); manually shaded-unshaded zirconia (IPS e.max ZirCAD MT, bleaching shade-BL) colored by the brushing technique, before sintering; stained-unshaded zirconia (IPS e.max ZirCAD MT BL) colored by the staining technique, after sintering. Spectrophotometric color assessments ensured the same initial perceived color (Vita Classical A2) for specimens included in the study (∆E00<1.77 acceptability threshold). Surface characteristics were assessed by scanning electron microscopy and atomic force microscopy. The specimens were immersed in coffee (n=5) or red wine (n=5) for 12 and 24 days and subsequently polished. The data were statistically and descriptively analyzed for color differences (∆E00), translucency parameters (TP00), and whiteness indexes for dentistry (WID), considering acceptability and perceptibility thresholds. RESULTS: The shaded groups found an irregular ceramic surface with uniformly sized zirconia crystals. The stained group found a glass-covered smoother surface. Significant alterations in color parameters (∆E00, TP00, WID) were observed with immersion in pigmenting beverages (P<.001) both after 12 days, and after 24 days. The shaded specimens had greater color alterations after immersion but benefited from the polishing procedure, which reduced color differences below an acceptable threshold in comparison with the baseline. Stained specimens had lower color alterations after immersion, but the polishing protocol was detrimental as it whitened the ceramic by subsurface exposure. CONCLUSIONS: The coloring technique influences the surface characteristics of zirconia ceramic and also the color parameters after exposure to colored beverages and polishing.


Subject(s)
Ceramics , Coffee , Color , Materials Testing , Surface Properties , Ceramics/chemistry , Zirconium/chemistry , Dental Porcelain
9.
J Prosthet Dent ; 2023 Jun 23.
Article in English | MEDLINE | ID: mdl-37357087

ABSTRACT

STATEMENT OF PROBLEM: After the use of evaluation paste, residue can remain on the bonding surface. However, how adhesion to lithium disilicate ceramic is affected is unclear. PURPOSE: The purpose of this in vitro study was to determine the effectiveness of lithium disilicate cleaning after contamination with an evaluation paste and before the application of a resin cement. MATERIAL AND METHODS: Rectangular lithium disilicate (IPS e.max CAD) specimens were obtained with a simulated milled surface, crystallized, etched with 5% hydrofluoric (HF) acid, and contaminated with an evaluation paste. The cleaning methods tested were air-water spray (SPRAY), 37% phosphoric acid (HPO), ultrasonic bath (ULT), cleaning paste (IVOC), and a conventional surface treatment (HF + silane-HF+SIL). The control (CTRL) group was not contaminated. After silane had been applied, resin cement cylinders were fabricated and light polymerized. Half of the cylinders (n=56) were tested for microshear bond strength at baseline (24 hours), and the other half after 210 days of water storage and 25 000 thermal cycles. Surface roughness, failure analysis, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) were performed. Statistical analysis was performed with the Kruskal-Wallis and Mann-Whitney tests for surface roughness and the 2-way ANOVA and Bonferroni post hoc tests for bond strength (α=.05). RESULTS: At baseline, only SPRAY did not restore the bond strength compared with CTRL. After aging, the bond strengths of SPRAY and IVOC were lower than of CTRL (P<.05); no significant difference was found between CTRL, HPO, ULT, and HF+SIL (P>.05). EDS demonstrated the presence of carbon in the SPRAY and ULT groups, probably remnants of the evaluation paste. SEM analysis identified such remnants in the SPRAY group only. CONCLUSIONS: For optimal bond strength between lithium disilicate and resin cement after evaluation paste use, cleaning the ceramic surface with 37% phosphoric acid, ultrasonic bath, or with hydrofluoric acid worked best.

10.
J Mech Behav Biomed Mater ; 142: 105854, 2023 06.
Article in English | MEDLINE | ID: mdl-37130494

ABSTRACT

OBJECTIVE: To explore and characterize the effect of the discrepancy between crestal bone height (CB) and pulp chamber floor (PCF) in the fatigue performance of endodontically-treated teeth rehabilitated with an endocrown restoration. MATERIALS AND METHODS: A total of 75 human molars free of defects, caries history or cracks were selected, then endodontically treated and randomly allocated into 5 groups (N = 15) according to the difference between PCF and CB, as follows: PCF 2 mm above, PCF 1 mm above, PCF leveled, PCF 1 mm below and PCF 2 mm below. Endocrown restorations were made with composite resin (Tetric N-Ceram, shade B3, Ivoclar) in 1.5 mm thickness and luted with a resin cement (Multilink N, Ivoclar) onto the dental elements. Monotonic testing was performed to define the fatigue parameters, and a cyclic fatigue test was used until failure of the assembly. The collected data were submitted to statistical survival analysis (Kaplan-Meier followed by Mantel-Cox and Weibull), fractographic analysis and finite element analysis (FEA) were performed as complementary analyzes. RESULTS: The PCF 2 mm below and PCF 1 mm below groups presented the best results regarding fatigue failure load (FFL) and number of cycles for failure (CFF) (p < 0.05), but presented no difference between each other (p > 0.05). The PCF leveled and PCF 1 mm above groups presented no statistical difference between them (p > 0.05), but performed better than the PCF 2 mm above group (p < 0.05). The rate of favorable failures of PCF 2 mm above, PCF 1 mm above, PCF leveled, PCF 1 mm below and PCF 2 mm below groups were 91.7%, 100%, 75%, 66.7% and 41.7%, respectively. FEA showed different stress magnitudes according to the pulp-chamber design. CONCLUSION: The insertion level of the dental element to be rehabilitated with an endocrown interferes in the mechanical fatigue performance of the set. The discrepancy between the CB height and the PCF has a direct effect, where the higher the PCF in relation to the CB, the greater the risk of mechanical failure of the restored dental element.


Subject(s)
Dental Pulp Cavity , Tooth, Nonvital , Humans , Ceramics , Composite Resins , Computer-Aided Design , Crowns , Dental Porcelain , Dental Restoration Failure , Dental Stress Analysis , Materials Testing , Surface Properties , Molar
11.
Environ Technol ; 44(9): 1334-1350, 2023 Apr.
Article in English | MEDLINE | ID: mdl-34719354

ABSTRACT

Microalgae biomass contributes to effluent bioremediation. It is a concentrated source of nutrients and organic carbon, making it a potential alternative as a soil biostimulant. In this context, this study aimed to evaluate the soil application of microalgae biomass produced from the meat processing industry effluent treatment. The biomass was applied dry and as a mixture to demonstrate its potential to increase plant production and soil metabolic functions, analyzed short-term. Doses of 0.25%, 0.5%, 1%, and 2% biomass were applied in soils from (i) Horizon A: taken at a depth between 0 and 10 cm and; (ii) Horizon B: taken at a depth between 20 and 40 cm. Corn growth (Zea Mays L.), basal soil respiration, microbial biomass carbon, total organic carbon, ß-glucosidase, acid phosphatase, arylsulfatase, and urease enzymatic activity were evaluated in each sample. It is concluded that applying 2% microalgae biomass led to higher basal soil respiration, microbial biomass carbon, and ß-glucosidase, acid phosphatase, arylsulfatase enzymatic activity in both soils. On the other hand, boron may have contributed to urease activity reduction in Soil A. Although 2% biomass led to higher soils characteristics, that dose did not promote higher plant growth. Hence, considering that plant growth must be in line with changes in soil characteristics, the result that provided the higher plant shoot dry matter mass was by applying 0.55% biomass in both soils. Therefore, the application of microalgae biomass produced from a meat processing industry effluent treatment promoted a biologically active soil and boosted plant growth.


Subject(s)
Microalgae , Soil , Biomass , Urease , Glucosylceramidase , Carbon , Arylsulfatases , Phosphoric Monoester Hydrolases , Soil Microbiology
12.
Ciênc. Saúde Colet. (Impr.) ; 28(8): 2377-2384, 2023. tab
Article in Portuguese | LILACS-Express | LILACS | ID: biblio-1447877

ABSTRACT

Resumo O tabagismo é um problema de saúde pública, está associado a uma elevada morbimortalidade. Os serviços de saúde vigentes para a cessação tabágica, apesar de efetivos, apresentam alcance limitado e foram comprometidos pela pandemia. O estudo teve como objetivo analisar o cuidado com a pessoa tabagista em João Pessoa (PB), na pandemia de COVID-19. Foi realizado um estudo descritivo, exploratório e quantitativo com duas fases: levantamento dos indicadores de saúde e avaliação dos perfis sociodemográficos dos profissionais e usuários dos serviços nos anos do estudo. Participaram da pesquisa sete profissionais, coordenadores de grupo de tabagismo e 20 usuários. Os resultados apontaram para uma baixa cobertura do programa, além de revelar queda no número de fumantes atendidos na pandemia, de 419 em 2019 para 129 em 2020. As entrevistas identificaram pontos positivos e limitações do programa, boa efetividade e baixo acesso, especialmente na APS, e que as estratégias utilizadas para conter o consumo do tabaco e seus riscos durante a pandemia partiram dos serviços e dos profissionais envolvidos. É possível concluir que, nessa região, o Programa Nacional de Controle do Tabagismo (PNCT) apresenta implantação incipiente na APS e que, durante a pandemia, o número de serviços ofertados foi reduzido, diminuindo a procura e as ações realizadas.


Abstract Smoking is a public health problem associated with high morbimortality. Smoking cessation services, although effective, have limited reach and have been compromised by the pandemic. This study aimed to analyze the care for smokers in João Pessoa (PB), Brazil, during the COVID-19 pandemic. A descriptive, exploratory, and quantitative study was conducted in two phases: a survey of health indicators and an evaluation of sociodemographic profiles of professionals and service clients during the study years. Seven professionals, smoking group coordinators, and 20 clients participated in the research. The results showed low program coverage, with a declining number of smokers treated during the pandemic, down from 419 in 2019 to 129 in 2020. Interviews identified the program's positive aspects and limitations, good effectiveness, and low access, especially in primary health care. Tobacco consumption and risk reduction strategies during the COVID-19 pandemic originated from services and professionals involved. We can conclude that the National Tobacco Control Program has an incipient implementation in primary health care in this region and that the number of services offered was reduced during the pandemic, decreasing demand and actions.

13.
Dent Mater ; 38(12): 2003-2013, 2022 12.
Article in English | MEDLINE | ID: mdl-36424207

ABSTRACT

OBJECTIVE: To characterize the effect of pigmentation techniques on the fatigue behavior of a 4YSZ ceramic adhesively luted onto dentin analog (glass fiber-reinforced epoxy resin). METHODS: 4YSZ ceramic discs (Ø= 10 mm, 1 mm thickness) were allocated into 5 groups: Ctrl - unshaded (IPS e.max ZirCAD MT BL); Manuf - shaded by the manufacturer (IPS e.max ZirCAD MT A2); Brush - unshaded pigmented, pre-sintering, using a brush; Stain - unshaded pigmented, post-sintering, during glaze application; Brush+Stain - combination of both techniques. Color assessments ensured the same perceived color (Vita Classical A2). Dentin analog discs (Ø= 10 mm, 2.5 mm thickness) were obtained, paired with the 4YSZ discs, and adhesively luted using a resin cement. Cyclic fatigue testing (n = 15) was run (20 Hz; 10,000 cycles/step, initial load 200 N; step-size 100 N up to 700 N; then 50 N until specimen failure). Fractographic, roughness and topography analyses were performed. RESULTS: No statistical (p > 0.05) detrimental influence were observed for fatigue outcomes (Ctrl = Manuf = Brush = Stain = Brush+Stain). However, the Brush+Stain technique induced inferior statistical (p < 0.05) fatigue performance compared to Stain. All failures were radial cracks with origin at the ceramic intaglio surface. The staining technique triggered statistically higher roughness (p < 0.05). Uniformly sized zirconia crystals were seen in the Ctrl, Manuf and Brush groups, and a smooth vitreous surface with encrusted pigments in the Stain and Brush+Stain groups. SIGNIFICANCE: Pigmentation techniques (Vita Classical A2 shade) have no detrimental effect on the mechanical fatigue properties of 4YSZ ceramic adhesively luted onto dentin analog.


Subject(s)
Ceramics , Pigmentation , Coloring Agents , Resin Cements , Dentin
14.
J Mech Behav Biomed Mater ; 134: 105362, 2022 10.
Article in English | MEDLINE | ID: mdl-35872462

ABSTRACT

This study aims to characterize the effect of pre- and/or post-sintering pigmentation techniques on the fatigue behavior of a 4YSZ ceramic (4 mol% yttrium stabilized zirconia). First, 4YSZ ceramic discs (IPS e.max ZirCAD, 15 mm diameter, and 1.2 mm thickness) were obtained and allocated according to the 'pigmentation technique' factor into 5 groups: Ctrl - unshaded ceramic disc (IPS e.max ZirCAD BL); Manuf - ceramic discs shaded by the manufacturer at block formation (IPS e.max ZirCAD MT A2); Brush - unshaded ceramic disc pigmented in the pre-sintered stage using a brush; Stain - unshaded ceramic disc pigmented in the post-sintering stage using a stain glaze (shade A2); Brush + Stain - combination of Brush and Stain techniques. The specimens were sintered and analyzed by a spectrophotometer (VITA Easyshade) for color differences (ΔE00 calculated according to CIEDE, 2000) to ensure that they present the same perceived color (ΔE00 ≤ 1.77, acceptability threshold). The specimens (n = 15) were submitted to biaxial flexural fatigue testing using a cyclic fatigue method (frequency of 20 Hz; 10,000 cycles per step; initial stress of 200 MPa; and step-size of 25 MPa) until specimen fracture. Fatigue strength (FS) and number of cycles until failure (CFF) were recorded with statistical purposes. Fractographic, complementary topography, elemental and roughness analyses were performed. The Ctrl shown the highest FS, CFF, and survival rates compared to the other conditions (p < 0.05), being only statistically similar to Brush. Stain showed the lowest FS, CFF and survival rates (p < 0.05). The Manuf and Brush + Stain shown intermediary performance. In regards of Weibull moduli, Brush shown the lowest values (lowest structural reliability), for both FS and CFF, being only statistically similar to Manuf. Topography analysis shown a uniform size of zirconia crystals in Ctrl, Manuf and Brush. In addition, a smooth glassy surface with some spots of impregnated pigment was observed in the groups where glaze was applied (Stain and Brush + Stain). This finding was corroborated by elemental analysis. Despite that, Stain and Brush + Stain presented the roughest surface (p < 0.05). In summary, the pigmentation techniques used to provide a Vita classical A2 color shade have a detrimental effect on the mechanical fatigue properties of a 4YSZ ceramic, except for the technique performed with the brush in the block pre-sintering stage. Despite this, the brush technique presents great variability in mechanical performance, resulting in lower structural reliability.


Subject(s)
Ceramics , Zirconium , Ceramics/chemistry , Dental Porcelain , Dental Stress Analysis , Materials Testing , Pigmentation , Reproducibility of Results , Surface Properties , Zirconium/chemistry
15.
Commun Med (Lond) ; 2: 72, 2022.
Article in English | MEDLINE | ID: mdl-35721829

ABSTRACT

Background: The Complete Blood Count (CBC) is a commonly used low-cost test that measures white blood cells, red blood cells, and platelets in a person's blood. It is a useful tool to support medical decisions, as intrinsic variations of each analyte bring relevant insights regarding potential diseases. In this study, we aimed at developing machine learning models for COVID-19 diagnosis through CBCs, unlocking the predictive power of non-linear relationships between multiple blood analytes. Methods: We collected 809,254 CBCs and 1,088,385 RT-PCR tests for SARS-Cov-2, of which 21% (234,466) were positive, from 900,220 unique individuals. To properly screen COVID-19, we also collected 120,807 CBCs of 16,940 individuals who tested positive for other respiratory viruses. We proposed an ensemble procedure that combines machine learning models for different respiratory infections and analyzed the results in both the first and second waves of COVID-19 cases in Brazil. Results: We obtain a high-performance AUROC of 90 + % for validations in both scenarios. We show that models built solely of SARS-Cov-2 data are biased, performing poorly in the presence of infections due to other RNA respiratory viruses. Conclusions: We demonstrate the potential of a novel machine learning approach for COVID-19 diagnosis based on a CBC and show that aggregating information about other respiratory diseases was essential to guarantee robustness in the results. Given its versatile nature, low cost, and speed, we believe that our tool can be particularly useful in a variety of scenarios-both during the pandemic and after.

16.
MethodsX ; 9: 101676, 2022.
Article in English | MEDLINE | ID: mdl-35402169

ABSTRACT

This paper presents a method to estimate institutional environment indexes using fuzzy modeling. Because of the complexity of the subject, institution, elements associated with this thinking are difficult to measure and compare. In order to address this problem, this research presents how a fuzzy inference system works and how to create institutional indexes from it. While methods that analyze institutional environments generally use secondary data from countries or regions provided by international organizations, the illustrative case applied to aquaculture in Brazil demonstrates the effectiveness of using this method to generate indexes related to the subject from primary data collected at the firm level. Furthermore, the combined use of this method with others already used in the institutional literature can be valuable both for researchers and public policy makers who seek to increasingly understand the role of institutions in economic performance.•Uses a Mamdani expert system of MIMO type to estimate institutional indexes.•Institutional ambient scores related to tilapia production in Brazil are presented.•The combined use of the method with others can be valuable for the research field.

17.
PLoS One ; 16(6): e0249737, 2021.
Article in English | MEDLINE | ID: mdl-34106952

ABSTRACT

Cyperus prophyllatus, an endangered new species of Cyperus (Cyperaceae) from an aquatic ecosystem of the Atlantic Forest, Espírito Santo State, southeastern Brazil, is described and illustrated. The spikelet morphology of Cyperus prophyllatus is unique among the c. 950 species of Cyperus in having both a conspicuous spikelet prophyll and a corky rachilla articulation, which remain persistent at the base of the spikelet after disarticulation. Our molecular phylogenetic data support the placement of C. prophyllatus in the C3 Cyperus Grade and more precisely in the clade representing Cyperus sect. Oxycaryum, which also includes C. blepharoleptos and C. gardneri. Anatomical and (micro)morphological analyses corroborate the phylogenetic results, provide a better understanding of ecology and taxonomy, as well as reveal compatibility of structures with survival and dispersion in aquatic environments. A distribution map, table with distinctive characters of allied species, and conservation status are made available.


Subject(s)
Cyperus/anatomy & histology , Endangered Species , Aquatic Organisms , Brazil , Cyperus/classification , Cyperus/genetics , Cyperus/ultrastructure , DNA, Plant/genetics , Flowers/anatomy & histology , Flowers/ultrastructure , Microscopy, Electron, Scanning , Phylogeny
18.
Sci Total Environ ; 779: 146205, 2021 Jul 20.
Article in English | MEDLINE | ID: mdl-33744566

ABSTRACT

With the increasing demand for food, it is increasingly important to maintain soil fertility with the application of fertilizers to supply the nutritional needs of plants. However, the nutrients applied to the soil can suffer significant losses, impacting the environment, and increasing production costs. Using alternative sources, such as microalgae biomass (MB) generated in the treatment of wastewater, in the production of organomineral fertilizers is a way to recover nutrients from the sewage, in addition to contributing to the improvement in soil fertility and favoring crop growth, which can guarantee agricultural sustainability. In the present study, MB was grown in the effluent 00from the food industry and, subsequently, a pelleted organomineral fertilizer (POF) was produced consisting of the combination of MB and synthetic fertilizer (urea), in different proportions. The performance of the proposed fertilizer was analyzed for losses due to ammonia volatilization (N-NH3) over time, for nitrogen assimilation capacity (N) by corn plants (Zea mays L.), and its structure was evaluated by scanning electron microscopy. The study concluded that the highest accumulated volatilization of N-NH3 was in the proportion of 40% of MB and the maximum content of N is reached in the proportion of 24.55% of MB. From the proportion of 25% of MB, there is no increase in N absorbed by plants, at the same time that the volatilization of N-NH3 grows with the increase in MB. The most important factors for obtaining these results were the interaction between MB and urea in the produced organomineral fertilizer tablet, where an increasingly thicker physical barrier was formed with the increase in the proportion of MB; in addition to the POF pH, in which the increase in MB proportions directly favored the pH increase.


Subject(s)
Fertilizers , Microalgae , Agriculture , Ammonia/analysis , Fertilizers/analysis , Nitrogen/analysis , Soil , Volatilization , Wastewater
19.
ESC Heart Fail ; 8(3): 2133-2143, 2021 06.
Article in English | MEDLINE | ID: mdl-33734611

ABSTRACT

AIMS: Despite of recent advances in the pharmacological treatment, heart failure (HF) maintains significant morbidity and mortality rates. While serum potassium disorders are common and associated with adverse outcomes, the exact recommended potassium level for patients with HF are not entirely established. We aimed to investigate the prognostic role of potassium levels on a cohort of patients with symptomatic chronic HF. METHODS AND RESULTS: Patients with symptomatic chronic HF were identified at the referral to 6 min walking test (6MWT) and were prospectively followed up for cardiovascular events. Clinical and laboratorial data were retrospectively obtained. The primary endpoint was the composite of cardiovascular death, hospitalization due to HF, and heart transplantation. The cohort included 178 patients with HF with the mean age of 51 ± 12.76 years, 39% were female, 85% of non-ischaemic cardiomyopathy, and 38% had New York Heart Association Class III with a relatively high Meta-Analysis Global Group in Chronic Heart Failure (MAGGIC) score (12.91 ± 6.6). The mean left ventricular ejection fraction was 39.98 ± 15.79%, and the mean 6MWT distance was 353 ± 136 m. After a median follow-up of 516 days, there were 22 major cardiovascular events (4 cardiovascular deaths, 13 HF admissions, and 5 heart transplants). Patients were stratified according to cut-point level of serum potassium of 4.7 mmol/L to predict combined cardiac events based on receiver operating characteristic analysis. Individuals with higher potassium levels had worse renal function (glomerular filtration rate, K ≤ 4.7: 102.8 ± 32.2 mL/min/1.73 m2 vs. K > 4.7: 85.42 ± 36.2 mL/min/1.73 m2 , P = 0.004), higher proportion of New York Heart Association Class III patients (K ≤ 4.7: 28% vs. K > 4.7: 48%, P = 0.0029), and also higher MAGGIC score (K ≤ 4.7: 12.08 ± 5.7 vs. K > 4.7: 14.9 ± 7.9, P = 0.0089), without significant differences on the baseline pharmacological HF treatment. Both potassium levels [hazard ratio (HR) 4.26, 95% confidence interval (CI) 1.59-11.421, P = 0.003] and 6MWT distance (HR 0.99, 95% CI 0.993-0.999, P = 0.01) were independently associated with the primary outcome. After adjustments for MAGGIC score and 6MWT distance, potassium levels > 4.7 mmol/L maintained a significant association with outcomes (HR 3.57, 95% CI 1.305-9.807, P = 0.013). Patients with K > 4.7 mmol/L were more likely to present clinical events during the follow-up (log rank = 0.005). Adding potassium levels to the model including 6MWT and MAGGIC significantly improved the prediction of events over 2 years (integrated discrimination index 0.105, 95% CI 0.018-0.281, P = 0.012 and net reclassification index 0.447, 95% CI 0.077-0.703, P = 0.028). CONCLUSIONS: Potassium levels were independently associated with worse outcomes in patients with chronic symptomatic HF, also improving the accuracy model for prognostic prediction when added to MAGGIC score and 6MWT distance. The potassium levels above 4.7 mmol/L might identify those patients at an increased risk of cardiovascular events.


Subject(s)
Heart Failure , Ventricular Function, Left , Adult , Female , Humans , Middle Aged , Potassium , Prognosis , Retrospective Studies , Stroke Volume
20.
AIDS ; 35(5): 737-745, 2021 04 01.
Article in English | MEDLINE | ID: mdl-33306557

ABSTRACT

OBJECTIVE: The current method for screening anal cancer is anal cytology, which has low sensitivity. Since high-risk human papillomavirus (HR-HPV) is associated with almost 90% of cases of anal cancer, the objective of this study is to evaluate whether testing for HR-HPV can optimize the screening. DESIGN: Prospective study with patients enrolled in a screening program for anal dysplasia. Considering high-resolution anoscopy (HRA)-guided biopsy as the gold standard for diagnosis of high-grade squamous intraepithelial lesions, the diagnostic performance of anal cytology, HR-HPV testing, and the combination of both was calculated. SETTINGS: A single center for anal dysplasia. PARTICIPANTS: A total of 364 patients (72% males, 82% HIV-positive). INTERVENTION: Patients underwent anal cytology, HR-HPV test, and HRA-guided biopsy of the anal canal. MAIN OUTCOME MEASURES: Ability of cytology and HR-HPV test (individually and combined) to detect high-grade squamous intraepithelial lesions, and analysis of the cost of each diagnostic algorithm. RESULTS: Cytology alone was the cheapest approach, but had the lowest sensitivity [59%, 95% confidence interval (CI) 46-71%], despite of highest specificity (73%, 95% CI 68-78%). Cotesting had the highest sensitivity (85%, 95% CI 74-93%) and lowest specificity (43%, 95% CI 38-49%), and did not seem to be cost-effective. However, HR-HPV testing can be used to triage patients with normal and atypical squamous cells of undetermined significance cytology for HRA, resulting in an algorithm with high sensitivity (80%, 95% CI 68-89%), and specificity (71%, 95% CI 65-76%), allied to a good cost-effectiveness. CONCLUSION: HR-HPV testing is helpful to optimize the screening in cases of normal and atypical squamous cells of undetermined significance cytology.


Subject(s)
Alphapapillomavirus , Anus Neoplasms , HIV Infections , Papillomavirus Infections , Anus Neoplasms/diagnosis , Early Detection of Cancer , Female , HIV Infections/diagnosis , Humans , Male , Papillomaviridae , Papillomavirus Infections/diagnosis , Prospective Studies
SELECTION OF CITATIONS
SEARCH DETAIL
...