ABSTRACT
As metal-organic frameworks (MOFs) gain traction for applications, such as hydrogen storage, it is essential to form the as-synthesized powder materials into shaped bodies with high packing densities to maximize their volumetric performance. Mechanical compaction, which involves compressing the materials at high pressure, has been reported to yield high monolith density but often results in a significant loss in accessible porosity. Herein, we sought to systematically control (1) crystal size, (2) solvation, and (3) compacting pressure in the pelletization process to achieve high packing density without compromising the porosity that makes MOFs functional. It was determined that solvation is the most critical factor among the three factors examined. Solvation that exceeds the pore volume prevents the framework from collapsing, allowing for porosity to be maintained through pelletization. Higher pelletization pressure results in higher packing density, with extensive loss of porosity being observed at a higher pressure if the solvation is below the pore volume. Lastly, we observed that the morphology and size of the MOF particles result in variation in the highest achievable packing efficiency, but these numbers (75%) are still greater than many existing techniques used to form MOFs. We concluded that the application of pressure through pelletization is a suitable and widely applicable technique for forming high-density MOF-monoliths.
ABSTRACT
Flexible metal-organic frameworks offer a route towards high useable hydrogen storage capacities with minimal swings in pressure and temperature via step-shaped adsorption and desorption profiles. Yet, the understanding of hydrogen-induced flexibility in candidate storage materials remains incomplete. Here, we investigate the hydrogen storage properties of a quintessential flexible metal-organic framework, ZIF-7. We use high-pressure isothermal hydrogen adsorption measurements to identify the pressure-temperature conditions of the hydrogen-induced structural transition in ZIF-7. The material displays narrow hysteresis and has a shallow adsorption slope between 100 K and 125 K. To gain mechanistic insight into the cause of the phase transition correlating with stepped adsorption and desorption, we conduct powder neutron diffraction measurements of the D2 gas-dosed structures at conditions across the phase change. Rietveld refinements of the powder neutron diffraction patterns yield the structures of activated ZIF-7 and of the gas-dosed material in the dense and open phases. The structure of the activated phase of ZIF-7 is corroborated by the structure of the activated phase of the Cd congener, CdIF-13, which we report here for the first time based on single crystal X-ray diffraction measurements. Subsequent Rietveld refinements of the powder patterns for the gas-dosed structure reveal that the primary D2 adsorption sites in the dense phase form D2-arene interactions between adjacent ligands in a sandwich-like adsorption motif. These sites are prevalent in both the dense and the open structure for ZIF-7, and we hypothesize that they play an important role in templating the structure of the open phase. We discuss the implications of our findings for future approaches to rationally tune step-shaped adsorption in ZIF-7, its congeners, and flexible porous adsorbents in general. Lastly, important to the application of flexible frameworks, we show that pelletization of ZIF-7 produces minimal variation in performance.
ABSTRACT
Coordinatively unsaturated metal-organic frameworks (MOFs) were studied for boron trifluoride (BF3) sorption. MOF-74-Mg, MOF-74-Mn, and MOF-74-Co show high initial uptake (below 6.7 × 10-3 bar) with negligible deliverable capacity. The BF3 isotherm of MOF-74-Cu exhibits gradual uptake up to 0.9 bar and has a deliverable gravimetric capacity that is more than 100% higher than activated carbon. Two other Cu2+ MOFs, MOF-505 and HKUST-1, have slightly lower deliverable capacities compared to MOF-74-Cu.
ABSTRACT
For the first time, phosphine adsorption has been evaluated in a series of metal-organic frameworks (MOFs). Open-metal coordination sites were found to significantly enhance the ability of MOFs to adsorb highly toxic phosphine gas, with the identity of the open-metal site also modulating the amount of gas adsorbed. The MOFs studied outperform activated carbon, a commonly used material to capture phosphine.
