ABSTRACT
It is shown that amplitude weighting can improve the accuracy of measurements of the frequency offset of a signal contaminated by multiplicative Gaussian noise. The more general non-Gaussian case is investigated through study of the statistics of a simple phase-screen scattering model. Formulas are derived for the low-order moments of the intensity-weighted phase derivative. Numerical simulation is tested against these results and is used to generate full probability densities that are analytically intractable and to determine the optimum weighting for the non-Gaussian regime of the model. The results are relevant to a variety of remote-sensing and signal-processing problems.
ABSTRACT
We demonstrate the successful operation of a cw laser Doppler wind sensor at a wavelength of 1.55 mum. At longer ranges (>100 m) the signal conforms closely to complex Gaussian statistics, consistent with the incoherent addition of contributions from a large number of scattering aerosols. As the range is reduced, the probe volume rapidly diminishes and the signal statistics are dramatically modified. At the shortest ranges (<8 m) the signal becomes dominated by short bursts, each originating from a single particle within the measurement volume. These single-particle events can have a very high signal-to-noise ratio (SNR) because (1) the signal becomes concentrated within a small time window and (2) its bandwidth is much reduced compared with multiparticle detection. Examples of wind-signal statistics at different ranges and for a variety of atmospheric backscatter conditions are presented. Results show that single-particle-scattering events play a significant role even to ranges of ~50 m, leading to results inconsistent with complex Gaussian statistics. The potential is assessed for a low-power laser Doppler wind sensor that exploits the SNR enhancement obtained with single-particle detection.
ABSTRACT
Remote detection of gaseous pollutants and other atmospheric constituents can be achieved with differential absorption lidar (DIAL) methods. The technique relies on the transmission of two or more laser wavelengths and exploits absorption features in the target gas by measuring the ratio of their detected powers to determine gas concentration. A common mode of operation is when the transmitter and receiver are collocated, and the absorption is measured over a return trip by a randomly scattering topographic target. Hence, in coherent DIAL, speckle fluctuation leads to a large uncertainty in the detected powers unless the signal is averaged over multiple correlation times, i.e., over many independent speckles. We examine a continuous-wave coherent DIAL system in which the laser wavelengths are transmitted and received by the same single-mode optical fibers. This ensures that the two wavelengths share a common spatial mode, which, for certain transmitter and target parameters, enables highly correlated speckle fluctuations to be readily achieved in practice. For a DIAL system, this gives the potential for improved accuracy in a given observation time. A theoretical analysis quantifies this benefit as a function of the degree of correlation between the two time series (which depends on wavelength separation and target depth). The results are compared with both a numerical simulation and a laboratory-based experiment.
ABSTRACT
We evaluate the performance of various commercially available InGaAs/InP avalanche photodiodes for photon counting in the infrared at temperatures that can be reached by Peltier cooling. We find that dark count rates are high, and this can partially saturate devices before optimum performance is achieved. At low temperatures the dark count rate rises because of a strong contribution from correlated afterpulses. We discuss ways of suppressing these afterpulses for different photon-counting applications.
ABSTRACT
We report an experimental demonstration of a beam-steering concept. A high-reflectivity phase-conjugate mirror is used to steer a high-power phase-conjugate beam using a low-power signal beam. The high reflectivity phase conjugation is achieved using Brillouin-induced four-wave mixing in a cell containing carbon disulfide.
ABSTRACT
We describe experiments in which a weak laser pulse is phase conjugated by using a high-gain Brillouin amplifier in front of a stimulated Brillouin scattering phase-conjugate mirror. We observe phase conjugation with signal energies as low as 3 x 10(-13) J and with a maximum reflection coefficient of 2 x 10(8).
ABSTRACT
We present measurements of the dependence of the phase-conjugate reflectivity on signal frequency for Brillouinenhanced four-wave mixing at pump intensities above the threshold instability. The measurements were made in TiC1(4) at lambda = 1 microm and are consistent with a computer model of the reflectivity. We have observed that the frequency of the conjugate beam is independent of the frequency of the input signal beam in the unstable regime.
ABSTRACT
We continue examination of the photon correlation properties of silicon avalanche photodiodes operated in photon-counting mode by extending their operation from that of passive quenching(1) to active quenching, yielding shorter dead time and higher frequency operation.
ABSTRACT
We show that a parametric downconversion crystal emitting angle resolved coincident photon pairs can be used to measure the absolute quantum efficiency of a photon counting detection system. We have measured the quantum efficiency of a silicon avalanche photodiode, operated in Geiger mode, as a function of operating voltage and compare this to results obtained using a conventional method.
