Synthesis of a tricyclic hexapeptide -via two consecutive ruthenium-catalyzed macrocyclization steps- with a constrained topology to mimic vancomycin's binding properties toward D-Ala-D-Ala dipeptide.

A ring-closing metathesis (RCM) - peptide coupling - ruthenium-catalyzed azide alkyne cycloaddition (RuAAC) strategy was developed to synthesize a tricyclic hexapeptide in which the side chain to side chain connectivity pattern resulted in a mimic with a topology that effectively mimics the bioactivity of vancomycin as a potent binder of the bacterial cell wall D-Ala-D-Ala dipeptide sequence and more importantly being an effective inhibitor of bacterial growth.

Inhibition of Octreotide Acylation Inside PLGA Microspheres by Derivatization of the Amines of the Peptide with a Self-Immolative Protecting Group.

Acylation of biopharmaceuticals such as peptides has been identified as a major obstacle for the successful development of PLGA controlled release formulations. The purpose of this study was to develop a method to inhibit peptide acylation in poly(d,l-lactide-co-glycolide) (PLGA) formulations by reversibly and temporarily blocking the amine groups of a model peptide (octreotide) with a self-immolative protecting group (SIP), O-4-nitrophenyl-O'-4-acetoxybenzyl carbonate. The octreotide with two self-immolative protecting groups (OctdiSIP) on the N-terminus and lysine side chain was synthesized by reaction of the peptide with O-4-nitrophenyl-O'-4-acetoxybenzyl carbonate, purified by preparative RP-HPLC and characterized by mass spectrometry. Degradation studies of OctdiSIP in aqueous solutions of different pH values showed that protected octreotide was stable at low pH (pH 5) whereas the protecting group was eliminated at physiological pH, especially in the presence of an esterase, to generate native octreotide. OctdiSIP encapsulated in PLGA microspheres, prepared using a double emulsion solvent evaporation method, showed substantial inhibition of acylation as compared to the unprotected octreotide: 52.5% of unprotected octreotide was acylated after 50 days incubation of microspheres in PBS pH 7.4 at 37 °C, whereas OctdiSIP showed only 5.0% acylation in the same time frame. In conclusion, the incorporation of self-immolative protection groups provides a viable approach for inhibition of acylation of peptides in PLGA delivery systems.

Proteome-wide profiling of protein assemblies by cross-linking mass spectrometry.

We describe an integrated workflow that robustly identifies cross-links from endogenous protein complexes in human cellular lysates. Our approach is based on the application of mass spectrometry (MS)-cleavable cross-linkers, sequential collision-induced dissociation (CID)-tandem MS (MS/MS) and electron-transfer dissociation (ETD)-MS/MS acquisitions, and a dedicated search engine, XlinkX, which allows rapid cross-link identification against a complete human proteome database. This approach allowed us to detect 2,179 unique cross-links (1,665 intraprotein cross-links at a 5% false discovery rate (FDR) and 514 interprotein cross-links at 1% FDR) in HeLa cell lysates. We validated the confidence of our cross-linking results by using a target-decoy strategy and mapping the observed cross-link distances onto existing high-resolution structures. Our data provided new structural information about many protein assemblies and captured dynamic interactions of the ribosome in contact with different elongation factors.

Synthesis of nisin AB dicarba analogs using ring-closing metathesis: influence of sp(3) versus sp(2) hybridization of the α-carbon atom of residues dehydrobutyrine-2 and dehydroalanine-5 on the lipid II binding affinity.

Herein the synthesis of two nisin AB dicarba analogs is described, focusing on amino acid modifications at positions 2 and 5. The nisin mimics were synthesized by a combination of solid phase synthesis of the linear peptides, followed by macrocyclization via ring-closing metathesis and fragment assembly by means of solution phase chemistry. The two N-terminal nisin AB-fragment mimics contain either the native dehydrobutyrine (Dhb)/dehydroalanine (Dha) amino acid residues or alanine at position 2 and 5, respectively. The native dehydrobutyrine at position 2 and dehydroalanine at position 5 were introduced as their precursors, namely threonine and serine, respectively, and subsequent dehydration was carried out by EDCI/CuCl as the condensing agent. Both AB-fragment mimics were analyzed in a lipid II binding assay and it was found that the Ala2/Ala5 AB-mimic (2) showed a reduced activity, while the Dhb2/Dha5 AB-mimic (3) was as active as the native AB-fragment (1).

Semi-synthesis of biologically active nisin hybrids composed of the native lanthionine ABC-fragment and a cross-stapled synthetic DE-fragment.

The antimicrobial peptide nisin is a promising template for designing novel peptide-based antibiotics to improve its drug-like properties. First steps in that direction represent the synthesis of hybrid nisin derivatives that contain a native nisin ABC-part and synthesized cross-stapled DE-ring fragments and are described here. The biological activity of the newly synthesized nisin derivatives was evaluated in order to compare the bioactivity of the synthetic DE-ring containing mimic and native lanthionine-bridged DE-ring containing nisin. The native nisin ABC-ring system was obtained via chymotrypsin digestion of full-length nisin, and was subsequently functionalized at the C-terminal carboxylate with two different amino alkyne moieties. Next, nisin hybrids were successfully prepared using Cu(I)-catalyzed azide alkyne cycloaddition 'click' chemistry by chemo-selective ligation of the ABC-alkyne with the N-terminal azido functionalized dicarba-DE ring mimic. The newly synthesized compounds were active as potent lipid II binders and retained antimicrobial activity in a growth inhibition assay. However, pore formation was not observed, possibly either due to the different character of the 'staples' as compared to the parent sulfides, or due to the triazole moiety as a sub-optimal amide bond isostere.

pH-controlled aggregation polymorphism of amyloidogenic Aß(16-22): insights for obtaining peptide tapes and peptide nanotubes, as function of the N-terminal capping moiety.

Peptide and protein self-assembly resulting in the formation of amyloidogenic aggregates is generally thought of as a pathological event associated with severe diseases. However, amyloid formation may also provide a basis for advanced bionanomaterials, since amyloid fibrils combine unique material-like properties that make them very useful for design of new types of conducting nanowires, bioactive ligands, and biodegradable coatings as drug-encapsulating materials. The morphology of the supramolecular aggregates determines the properties and application range of these bionanomaterials. An important parameter to control the supramolecular morphology, is the overall charge of the peptide, which is related to the pH of the environment. Herein, we describe the design, synthesis and morphological analysis of a series of N-terminally functionalized Aß(16-22) peptides (∼Lys-Leu-Val-Phe-Phe-Ala-Glu-OH), that underwent a pH-induced polymorphism, ranging from lamellar sheets, helical tapes, peptide nanotubes, and amyloid fibrils as was observed by transmission electron microscopy. Infrared spectroscopy and wide angle X-ray scattering studies showed that peptide self-assembly was driven by ß-sheet formation, and that the supramolecular morphology was directed by subtle variations in electrostatic interactions. Finally, a structural model and hierarchy of self-assembly of a peptide nanotube, assembled at pH 1, is proposed.

Synthesis, antimicrobial activity, and membrane permeabilizing properties of C-terminally modified nisin conjugates accessed by CuAAC.

Functionalization of the lantibiotic nisin with fluorescent reporter molecules is highly important for the understanding of its mode of action as a potent antimicrobial peptide. In addition to this, multimerization of nisin to obtain multivalent peptide constructs and conjugation of nisin to bioactive molecules or grafting it on surfaces can be attractive methods for interference with bacterial growth. Here, we report a convenient method for the synthesis of such nisin conjugates and show that these nisin derivatives retain both their antimicrobial activity and their membrane permeabilizing properties. The synthesis is based on the Cu(I)-catalyzed alkyne-azide cycloaddition reaction (CuAAC) as a bioorthogonal ligation method for large and unprotected peptides in which nisin was C-terminally modified with propargylamine and subsequently efficiently conjugated to a series of functionalized azides. Two fluorescently labeled nisin conjugates together with a dimeric nisin construct were prepared while membrane insertion as well as antimicrobial activity were unaffected by these modifications. This study shows that C-terminal modification of nisin does not deteriorate biological activity in sharp contrast to N-terminal modification and therefore C-terminally modified nisin analogues are valuable tools to study the antibacterial mode of action of nisin. Furthermore, the ability to use stoichiometric amounts of the azide containing molecule opens up possibilities for surface tethering and more complex multivalent structures.

Synthesis and structural characterization of the individual diastereoisomers of a cross-stapled alkene-bridged nisin DE-ring mimic.

Herein, we describe the synthesis, structural characterization, and synthetic use as an advanced intermediate of a cross-stapled alkene-bridged hexapeptide to mimic the DE-ring of the lantibiotic nisin. The linear precursor was cyclized by ring-closing metathesis to give the correctly folded bicyclic hexapeptide in a single step, and the four individual diastereoisomers were isolated, structurally assigned and characterized by HPLC, NMR and MS, respectively. The bicyclic hexapeptide was used as a versatile advanced synthon and was modified at its C- and N-terminus, among others, with an azide moiety to access a building block suitable for Cu(I)-catalyzed alkyne-azide cycloaddition-based ligation reactions.

Scalable purification of the lantibiotic nisin and isolation of chemical/enzymatic cleavage fragments suitable for semi-synthesis.

Herein, we describe a scalable purification of the lantibiotic nisin via an extraction/precipitation approach using a biphasic system, which can be carried out up to 40-80 gram scale. This approach results in an at least tenfold enrichment of commercially available preparations of nisin, which usually contain only 2.5% of the desired peptide, to allow further purification by preparative HPLC. As a follow-up study, the enriched nisin sample was digested either by trypsin or chymotrypsin, or treated by CNBr, and these reactions were monitored by LC-MS to identify and characterize the obtained fragments. Two previously unknown cleavage sites have been identified: Asn20-Met21 and Met21-Lys22 for trypsin and chymotrypsin, respectively. Furthermore, a novel and convenient enzymatic approach to isolate the native nisin C-ring [nisin fragment (13-20)] was uncovered. Finally, by means of preparative HPLC, nisin fragments (1-12), (1-20), (22-34), and (22-31) could be isolated and will be used in a semi-synthesis approach to elucidate the role of each fragment in the mode of action of nisin as an antimicrobial peptide.

Improving the biological activity of the antimicrobial peptide anoplin by membrane anchoring through a lipophilic amino acid derivative.

The lipophilic amino acid, (S)-2-aminoundecanoic acid, was synthesized and incorporated at a number of specific positions within the peptide sequence of anoplin. These lipophilic anoplin analogs showed to be more active against Escherichia coli and Staphylococcus aureus compared to native anoplin, while the EC50-value of hemolysis was at least one order of magnitude lower than the MIC values. This was in sharp contrast to the N-acylated anoplin derivative, where a gain in activity also led to a complete loss of selectivity. Thus, the incorporation of a lipophilic amino acid residue into anoplin enhanced the antimicrobial activity, while selectivity towards microbial membranes was retained.

Synthesis of 1,5-triazole bridged vancomycin CDE-ring bicyclic mimics using RuAAC macrocyclization.

Herein we report the Ru(II)-catalyzed double-macrocyclization of a hexapeptide to obtain a mimic of the bicyclic CDE-ring of vancomycin, followed by measurement of its binding affinity for small peptide ligands using ITC.

A micelle-shedding thermosensitive hydrogel as sustained release formulation.

In this paper it is shown that when a thermosensitive hydrogel based on poly(N-isopropylacrylamide)-poly(ethylene glycol)-poly(N-isopropylacrylamide) (pNIPAm-PEG-pNIPAm) was transferred into water, flower-like micelles were continuously released as long as the medium was regularly refreshed. On the other hand, if the medium was not refreshed the concentration of micelles reached an equilibrium. When this gel was loaded with the cytostatic agent paclitaxel (PTX), the released micelles solubilized PTX, as evidenced by a PTX concentration in the release medium above its aqueous solubility. To test the applicability of these micelle-releasing gels for sustained and systemic delivery of PTX an in vivo experiment was performed in tumor-bearing mice. pNIPAm-PEG-pNIPAm gels (without and with 1.2% and 6.0% PTX loading) were administered i.p. in nude mice bearing 14C human squamous cell carcinoma tumor xenografts to obtain doses corresponding to one and five times the maximum tolerated dose of PTX (when given i.v. as the standard formulation in Cremophor EL/ethanol). All gel formulations were well tolerated and no signs of acute systemic toxicity were observed. After injection of the highest dose, PTX levels in serum could be determined for 48 h with a comparatively long elimination half-life of 7.4 h pointing to a sustained release of PTX. A bioavailability of 100% was calculated from the area under the curve of plasma concentration vs time. Furthermore, at the highest dose, PTX was shown to completely inhibit tumor growth for at least 3 weeks with a single hydrogel injection. This promising concept may find application as a depot formulation for sustained, metronomic dosing of chemotherapeutics.

Probing the lipid-protein interface using model transmembrane peptides with a covalently linked acyl chain.

The aim of this study was to gain insight into how interactions between proteins and lipids in membranes are sensed at the protein-lipid interface. As a probe to analyze this interface, we used deuterium-labeled acyl chains that were covalently linked to a model transmembrane peptide. First, a perdeuterated palmitoyl chain was coupled to the Trp-flanked peptide WALP23 (Ac-CGWW(LA)(8)LWWA-NH(2)), and the deuterium NMR spectrum was analyzed in di-C18:1-phosphatidylcholine (PC) bilayers. We found that the chain order of this peptide-linked chain is rather similar to that of a noncovalently coupled perdeuterated palmitoyl chain, except that it exhibits a slightly lower order. Similar results were obtained when site-specific deuterium labels were used and when the palmitoyl chain was attached to the more-hydrophobic model peptide WLP23 (Ac-CGWWL(17)WWA-NH(2)) or to the Lys-flanked peptide KALP23 (Ac-CGKK(LA)(8)LKKA-NH(2)). The experiments showed that the order of both the peptide-linked chains and the noncovalently coupled palmitoyl chains in the phospholipid bilayer increases in the order KALP23 < WALP23 < WLP23. Furthermore, changes in the bulk lipid bilayer thickness caused by varying the lipid composition from di-C14:1-PC to di-C18:1-PC or by including cholesterol were sensed rather similarly by the covalently coupled chain and the noncovalently coupled palmitoyl chains. The results indicate that the properties of lipids adjacent to transmembrane peptides mostly reflect the properties of the surrounding lipid bilayer, and hence that (at least for the single-span model peptides used in this study) annular lipids do not play a highly specific role in protein-lipid interactions.

Looped structure of flowerlike micelles revealed by 1H NMR relaxometry and light scattering.

We present experimental proof that so-called "flowerlike micelles" exist and that they have some distinctly different properties compared to their "starlike" counterparts. Amphiphilic AB diblock and BAB triblock copolymers consisting of poly(ethylene glycol) (PEG) as hydrophilic A block and thermosensitive poly(N-isopropylacrylamide) (pNIPAm) B block(s) were synthesized via atom transfer radical polymerization (ATRP). In aqueous solutions, both block copolymer types form micelles above the cloud point of pNIPAm. Static and dynamic light scattering measurements in combination with NMR relaxation experiments proved the existence of flowerlike micelles based on pNIPAm(16kDa)-PEG(4kDa)-pNIPAm(16kDa) which had a smaller radius and lower mass and aggregation number than starlike micelles based on mPEG(2kDa)-pNIPAm(16kDa). Furthermore, the PEG surface density was much lower for the flowerlike micelles, which we attribute to the looped configuration of the hydrophilic PEG block. (1)H NMR relaxation measurements showed biphasic T(2) relaxation for PEG, indicating rigid PEG segments close to the micelle core and more flexible distal segments. Even the flexible distal segments were shown to have a lower mobility in the flowerlike micelles compared to the starlike micelles, indicating strain due to loop formation. Taken together, it is demonstrated that self-assemblies of BAB triblock copolymers have their hydrophilic block in a looped conformation and thus indeed adopt a flowerlike conformation.

Peptides and proteins as a continuing exciting source of inspiration for peptidomimetics.

Despite their enormous diversity in biological function and structure, peptides and proteins are endowed with properties that have induced and stimulated the development of peptidomimetics. Clearly, peptides can be considered as the "stem" of a phylogenetic molecular development tree from which branches of oligomeric peptidomimetics such as peptoids, peptidosulfonamides, urea peptidomimetics, as well as ß-peptides have sprouted. It is still a challenge to efficiently synthesize these oligomeric species, and study their structural and biological properties. Combining peptides and peptidomimetics led to the emergence of peptide-peptidomimetic hybrids in which one or more (proteinogenic) amino acid residues have been replaced with these mimetic residues. In scan-like approaches, the influence of these replacements on biological activity can then be studied, to evaluate to what extent a peptide can be transformed into a peptidomimetic structure while maintaining, or even improving, its biological properties. A central issue, especially with the smaller peptides, is the lack of secondary structure. Important approaches to control secondary structure include the introduction of α,α-disubstituted amino acids, or (di)peptidomimetic structures such as the Freidinger lactam. Apart from intra-amino acid constraints, inter-amino acid constraints for formation of a diversity of cyclic peptides have shaped a thick branch. Apart from the classical disulfide bridges, the repertoire has been extended to include sulfide and triazole bridges as well as the single-, double- and even triple-bond replacements, accessible by the extremely versatile ring-closing alkene/alkyne metathesis approaches. The latter approach is now the method of choice for the secondary structure that presents the greatest challenge for structural stabilization: the α-helix.

Cu(I)- and Ru(II)-mediated "click" cyclization of tripeptides toward vancomycin-inspired mimics.

Structural mimics comprising 1,4- and 1,5-disubstituted triazole-containing cyclic tripeptides with excellent resemblance toward the DE-ring of vancomycin are conveniently accessible using Cu(I)- or Ru(II)-assisted "click" cyclization.

ATRP, subsequent azide substitution and 'click' chemistry: three reactions using one catalyst in one pot.

This communication describes a novel and fast reaction to substitute the living chain end after Atom Transfer Radical Polymerization (ATRP) by an azide functionality. The reaction is catalyzed by the ATRP catalyst at room temperature in aqueous solution and can be followed by a 'click' reaction using again the same catalyst.

Spacer effects on in vivo properties of DOTA-conjugated dimeric [Tyr3]octreotate peptides synthesized by a "Cu(I)-click" and "sulfo-click" ligation method.

We report on the SSTR2-binding properties of a series of four dimeric [Tyr3]octreotate analogues with different spacer lengths (nine, 19, 41, and 57 atoms) between the peptides. Two analogues (9 and 57 atoms) were selected as precursors for the design, synthesis, and biological evaluation of DOTA-conjugated dimeric [Tyr3]octreotate analogues for tumor targeting. These compounds were synthesized by using a two-stage click ligation procedure: a Cu(I) -catalyzed 1,3-dipolar cycloaddition ("copper-click" reaction) and a thio acid/sulfonyl azide amidation ("sulfo-click" reaction). The IC(50) values of these DOTA-conjugated [Tyr3]octreotate analogues were comparable, and internalization studies showed that the nine-atom (111) In-DOTA-labeled [Tyr3]octreotate dimer had rapid and high receptor binding. Biodistribution studies with BALB/c nude mice bearing subcutaneous AR42J tumors showed that the (111) In-labeled [Tyr3]octreotate dimer (nine atoms) had a high tumor uptake at 1 h p.i. (38.8 ± 8.3 % ID g(-1) ), and excellent tumor retention at 4 h p.i. (40.9 ± 2.5 % ID g(-1) ). However, the introduction of the extended hydrophilic 57 atoms spacer led to rapid clearance from the circulation; this limited tumor accumulation of the radiotracer (21.4 ± 4.9 % ID g(-1) at 1 h p.i.). These findings provide important insight on dimerization and spacer effects on the in vivo properties of DOTA-conjugated [Tyr3]octreotate dimers.

Influence of hydrophobic mismatch and amino acid composition on the lateral diffusion of transmembrane peptides.

We investigated the effect of amino acid composition and hydrophobic length of alpha-helical transmembrane peptides and the role of electrostatic interactions on the lateral diffusion of the peptides in lipid membranes. Model peptides of varying length and composition, and either tryptophans or lysines as flanking residues, were synthesized. The peptides were labeled with the fluorescent label Alexa Fluor 488 and incorporated into phospholipid bilayers of different hydrophobic thickness and composition. Giant unilamellar vesicles were formed by electroformation, and the lateral diffusion of the transmembrane peptides (and lipids) was determined by fluorescence correlation spectroscopy. In addition, we performed coarse-grained molecular-dynamics simulations of single peptides of different hydrophobic lengths embedded in planar membranes of different thicknesses. Both the experimental and simulation results indicate that lateral diffusion is sensitive to membrane thickness between the peptides and surrounding lipids. We did not observe a difference in the lateral diffusion of the peptides with respect to the presence of tryptophans or lysines as flanking residues. The specific lipid headgroup composition of the membrane has a much less pronounced impact on the diffusion of the peptides than does the hydrophobic thickness.

Synthesis and characterization of enzymatically biodegradable PEG and peptide-based hydrogels prepared by click chemistry.

Herein we describe the synthesis and rheological characterization of a series of enzymatically sensitive PEG and peptide-based hydrogels by the Cu(I)-catalyzed 1,3-dipolar cycloaddition reaction. The hydrogels were synthesized by a combination of alkyne-functionalized star-shaped PEG molecules (two 4-armed PEGs with M(w) 10 and 20 kDa, respectively, and one 8-armed PEG of 20 kDa) and the protease-sensitive bis-azido peptide, N(alpha)-(azido)-D-alanyl-phenylalanyl-lysyl-(2-azidoethyl)-amide (6) in the presence of CuSO(4) and sodium ascorbate in aqueous solution. The swelling ratio and the storage modulus (G') of the hydrogels could be tailored by several parameters, for example, the initial solid content of the hydrogel, the molecular weight of the PEG derivative, and by the architecture of the PEG molecule (4- versus 8-armed PEG derivative). The peptide sequence, D-Ala-Phe-Lys, was sensitive toward the proteases plasmin and trypsin to render the hydrogels biodegradable.