Association of ergonomics risk factors among Iranian calico crafts-men and musculoskeletal discomforts: a cross-sectional study.

BACKGROUND: Work-related musculoskeletal disorders (WMSDs) have always been complaints reported by handicraft workers due to the repetitive and static nature of work. Therefore, the current study aimed to investigate the ergonomic conditions of craftsmen engaged with the calico industry. METHOD: This cross-sectional study was done in small calico industrial workshops in Isfahan, Iran, in 2022. The sample selection method in this study was census. Using QEC (Quick Exposure Checklist) and Cornell-Musculoskeletal Discomfort Questionnaire (CMDQ), the ergonomic status of workers was evaluated. The data were analyzed using Chi-square (χ2) and Pearson's product-moment correlation test. RESULTS: The risk level of working postures in wrist/hand, shoulder /arm, and neck were high or very high among the craftsmen. The relationships between discomfort complaints reported by the participants and the risk level of working postures were significant for neck χ2 (1, N = 100) = 13.603, Pvalue = 0.034, left knee χ2 (1, N = 100) = 12.310, Pvalue = 0.030 and lower left leg χ2 (1, N = 100) = 11.906, Pvalue = 0.042. The posture risk level scores for %57.7 of the participants who self-reported the right shoulder discomfort were found to be high or very high. CONCLUSIONS: The high risk found in most calico craftsmen may induce more serious musculoskeletal problems that require applicable interventions. The most important risk factors realized among calico craftsmen were prolonged sitting postures and repetitive tasks.

Chemical pollutants in the respiratory zone of welders: Determination of concentrations and hazard analysis.

BACKGROUND: Welding pollutants have potentially dangerous effects on the health of welders. Analysis of exposure risks is an appropriate method for industrial hygiene occupational exposure. OBJECTIVE: The present study aimed to determine the concentrations of exposure and risk evaluation of welders to fumes and gases in three common types of welding including Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW) and Gas Tungsten Arc Welding (GTAW). METHODS: This cross-sectional study was carried out at a steel company. Samples were taken from manganese, chromium and nickel fumes with NIOSH 7300 method and for NO, NO2, CO and O3 gases using direct reading instruments. SQRCA method was used to assess the level of exposure risk. RESULTS: Our study showed that the highest and lowest concentrations of exposure to gases were observed in MIG and GTAW welding, respectively. Also, the highest and lowest concentrations of exposure to metals were observed in SMAW and GTAW processes, respectively. Mean exposure to M, Cr and Ni metals was 2.302, 3.195, and 1.241 mg/m3, respectively. Also, mean exposure to CO, NO, NO2 and O3 was 43.05, 27.88, 4.30, and 0.41 ppm, respectively. Results of risk analysis showed that O3, NO2 and Cr had high and very high risk levels in all welding processes. CONCLUSIONS: MIG and SMAW welders have a high occupational exposure to metal and toxic gases in welding. Preventive measures such as assessment of workplace air, installation of the ventilation systems, and providing appropriate respiratory protection devices for welders should be taken.

Feasibility Study of Using Radio-frequency Identification Technology in Estimating the Time Pattern of Exposure to Causative Agents of Occupational Diseases.

BACKGROUND: At workplaces, the workers exposed to several harmful agents such as physical, chemical, and biological pollutant that cause occupational diseases. There are a lot of jobs that not allow a certain pattern of exposure to this agent. In this article, we introduce a technology named radio-frequency identification (RFID) to estimate the exposure time of workers to harmful agent. MATERIALS AND METHODS: This applied study was carried out experimentally in an industry in Isfahan province, Iran. Twenty-nine participants selected from the workers without a fixed pattern of exposure. Two methods used to measure the exposure time of them. The first method was based on a self-made RFID device and conducted by the workers. The second method performed by stopwatch, which was carried out by the occupational hygienist. The results were analyzed using SPSS 20 and descriptive statistics, Spearman correlation coefficient, and paired samples t-test. RESULTS: The mean age of the participants was 36.48 ± 5.889 and job experience was 9.06 ± 6.316 years. Spearman correlation coefficient shows that there is a significant correlation between the exposure times measured by the workers and occupational hygienist (R in all zones was higher than 0.9, P < 0.05). Paired samples t-test shows that there are no significant differences between the mean exposure times measured by the workers and occupational hygienist in each zone and in all the zones (P > 0.05). CONCLUSION: RFID technology is an appropriate method to evaluate the exposure time of workers without fixed pattern of exposure to causative factors of occupational diseases. It can also be used in other fields of occupational health engineering.

Effect of physical activity on musculoskeletal discomforts among handicraft workers.

INTRODUCTION: Handicrafts seems to be one of the high-risk jobs regarding work-related musculoskeletal disorders (WMSDs) which necessitate the implementation of different corrective intervention like regular physical activities. This study aimed to investigate the impact of physical activity on WMSDs among craftsmen. METHODS: This cross-sectional study was an analytical - descriptive study carried out on 100 craftsmen working in Isfahan, Iran, in 2013. The sampling method was census, and all workshops involved with this job were included. Information on demographic parameters and physical activity was collected by demographic forms. The data related to worker's musculoskeletal discomforts were conducted using Cornell Musculoskeletal Discomfort Questionnaire. The data were analyzed using statistical tests including independent t-test, Chi-square, and ANOVA. The statistical analysis was performed using SPSS 18. RESULTS: The highest percentages of complaints related to severe musculoskeletal discomfort were reported in right shoulder (%36), right wrist (%26), neck (%25), and upper right arm (%24), respectively. A significant relationship was observed between physical activity and musculoskeletal discomforts of left wrist (P = 0.012), lower back (P = 0.016), and neck (P = 0.006). DISCUSSION AND CONCLUSION: Based on the study results, it can be inferred that regular but not too heavy physical activity can have a positive impact on decreasing the musculoskeletal discomforts.

Analysis of xylene in aqueous media using needle-trap microextraction with a carbon nanotube sorbent.

This paper describes a new extraction technique with needles and a sorbent based on carbon nanotubes to analyze trace amounts of three isomers of xylenes in aqueous samples. In this research, results have been compared with one commercial sorbent. The synthesized sorbent was prepared using sol-gel technology and was packed into 20 gauge needles, and the same size needle was used for packing the commercial sorbent. In the extraction process, a purge and trap sampling methodology is developed, so purging and trapping cycles were performed by a sampling pump. Optimized conditions for standard xylene samples have been obtained, and eight urine samples from workers that were exposed to xylene in the workplace were collected and analyzed. Experimental parameters such as limits of detection and quantification were investigated, and these two parameters were <1 µg/L.