Characterization of a new ionophore-based ion-selective electrode for the potentiometric determination of creatinine in urine.

The optimization, analytical characterization and validation of a novel ion-selective electrode for the highly sensitive and selective determination of creatinine in urine is presented. A newly synthesized calix[4]pyrrole-based molecule is used as an ionophore for the enhanced recognition of creatininium cations. The calculation of the complex formation constants in the polymeric membrane with creatininium, potassium and sodium confirms the strong selective interactions between the ionophore and the target. The optimization of the potentiometric sensor presented here yields an outstanding analytical performance, with a linear range that spans from 1µM to 10mM and limit of detection of 10-6.2M. The calculation of the selectivity coefficients against most commonly found interferences also show significant improvements when compared to other sensors already reported. The performance of this novel sensor is tested by measuring creatinine in real urine samples (N=50) and comparing the values against the standard colorimetric approach (Jaffé's reaction). The results show that this sensor allows the fast and accurate determination of creatinine in real samples with minimal sample manipulation.

Recognition and Sensing of Creatinine.

Current methods for creatinine quantification suffer from significant drawbacks when aiming to combine accuracy, simplicity, and affordability. Here, an unprecedented synthetic receptor, an aryl-substituted calix[4]pyrrole with a monophosphonate bridge, is reported that displays remarkable affinity for creatinine and the creatininium cation. The receptor works by including the guest in its deep and polar aromatic cavity and establishing directional interactions in three dimensions. When incorporated into a suitable polymeric membrane, this molecule acts as an ionophore. A highly sensitive and selective potentiometric sensor suitable for the determination of creatinine levels in biological fluids, such as urine or plasma, in an accurate, fast, simple, and cost-effective way has thus been developed.

Chloride-selective electrodes based on "two-wall" aryl-extended calix[4]pyrroles: combining hydrogen bonds and anion-π interactions to achieve optimum performance.

The performance of chloride-selective electrodes based on "two-wall" aryl-extended calix[4]pyrroles and multiwall carbon nanotubes is presented. The calix[4]pyrrole receptors bear two phenyl groups at opposite meso-positions. When the meso-phenyl groups are decorated with strong electron-withdrawing substituents, attractive anion-π interactions may exist between the receptor's aromatic walls and the sandwiched anion. These anion-π interactions are shown to significantly affect the selectivity of the electrodes. Calix[4]pyrrole, bearing a p-nitro withdrawing group on each of the meso-phenyl rings, afforded sensors that display anti-Hofmeister behavior against the lipophilic salicylate and nitrate anions. Based on the experimental data, a series of principles that help in predicting the suitability of synthetic receptors for use as anion-specific ionophores is discussed. Finally, the sensors deliver excellent results in the direct detection of chloride in bodily fluids.

Rubber-based substrates modified with carbon nanotubes inks to build flexible electrochemical sensors.

The development of a solid-contact potentiometric sensor based on conducting rubbers using a carbon nanotubes ink is described here. Commercial rubbers are turned into conductive ones by a simple and versatile method, i.e. painting an aqueous dispersion of single-walled carbon nanotubes on the polymer surface. On this substrate, both the working ion-selective electrode and the reference electrode are built in order to form an integrated potentiometric cell. As a proof-of-principle, selective potassium electrodes are fully characterized giving comparable performances to conventional electrodes (sensitivity, selectivity, stability, linear range, limit of detection and reproducibility). As an application of the rubber-based electrodes, a bracelet was constructed to measure potassium levels in artificial sweat. Since rubbers are ubiquitous in our quotidian life, this approach offers great promise for the generation of chemical information through daily objects.

A reference electrode based on polyvinyl butyral (PVB) polymer for decentralized chemical measurements.

A new solid-state reference electrode using a polymeric membrane of polyvinyl butyral (PVB), Ag/AgCl and NaCl to be used in decentralized chemical measurements is presented. The electrode is made by drop-casting the membrane cocktail onto a glassy carbon (GC) substrate. A stable potential (less than 1 mV dec(-1)) over a wide range of concentrations for the several chemical species tested is obtained. No significant influence to changes in redox potential, light and pH are observed. The response of this novel electrode shows good correlation when compared with a conventional double-junction reference electrode. Also good long-term stability (90±33 µV/h) and a lifetime of approximately 4 months are obtained. Aspects related to the working mechanisms are discussed. Atomic Force Microscopy (AFM) studies reveal the presence of nanopores and channels on the surface, and electrochemical impedance spectroscopy (EIS) of optimized electrodes show low bulk resistances, usually in the kΩ range, suggesting that a nanoporous polymeric structure is formed in the interface with the solution. Future applications of this electrode as a disposable device for decentralized measurements are discussed. Examples of the utilization on wearable substrates (tattoos, fabrics, etc) are provided.

A paper-based potentiometric cell for decentralized monitoring of Li levels in whole blood.

A novel approach to monitor Li levels in blood in decentralized (out of the lab) settings is presented. The approach uses a potentiometric cell fully made with filter paper as a support. Electrodes were built using carbon nanotubes ink to create a conductive path and a suitable polymeric membrane. Solid-state ion-selective electrodes for Li and a reference electrode were built and optimized. The results obtained on real samples of serum and whole blood are comparable with those obtained by conventional standard approaches. This platform shows an outstanding performance for the direct, fast and low-cost monitoring of Li levels in blood.

Computer-operated analytical platform for the determination of nutrients in hydroponic systems.

Hydroponics is a water, energy, space, and cost efficient system for growing plants in constrained spaces or land exhausted areas. Precise control of hydroponic nutrients is essential for growing healthy plants and producing high yields. In this article we report for the first time on a new computer-operated analytical platform which can be readily used for the determination of essential nutrients in hydroponic growing systems. The liquid-handling system uses inexpensive components (i.e., peristaltic pump and solenoid valves), which are discretely computer-operated to automatically condition, calibrate and clean a multi-probe of solid-contact ion-selective electrodes (ISEs). These ISEs, which are based on carbon nanotubes, offer high portability, robustness and easy maintenance and storage. With this new computer-operated analytical platform we performed automatic measurements of K(+), Ca(2+), NO3(-) and Cl(-) during tomato plants growth in order to assure optimal nutritional uptake and tomato production.

Graphene-based potentiometric biosensor for the immediate detection of living bacteria.

In this communication we present a potentiometric aptasensor based on chemically modified graphene (transducer layer of the aptasensor) and aptamers (sensing layer). Graphene oxide (GO) and reduced graphene oxide (RGO) are the basis for the construction of two versions of the aptasensor for the detection of a challenging living organism such as Staphylococcus aureus. In these two versions, DNA aptamers are either covalently (in the GO case) or non-covalently (in the RGO case) attached to the transducer layer. In both cases we are able to selectively detect a single CFU/mL of S. aureus in an assay close to real time, although the noise level associated to the aptasensors made with RGO is lower than the ones made with GO. These new aptasensors, that show a high selectivity, are characterized by the simplicity of the technique and the materials used for their construction while offering ultra-low detection limits in very short time responses in the detection of microorganisms.

A novel miniaturized radiofrequency potentiometer tag using ion-selective electrodes for wireless ion sensing.

Instrumental approaches to remotely and wirelessly monitoring chemical species are increasingly needed. Together with the electronic developments, efforts to optimize and validate the performance of these new devices are required. In this work, the analytical performance of a recently developed potentiometer-radiofrequency tag connected to ion-selective electrodes is evaluated. This credit card sized and extremely low power consumption device yield results that are comparable to those obtained with more sophisticated, lab-based tools. Advantages such as portability and autonomy, together with unique features, such as the ability to be read through the walls in a closed vessel are demonstrated. Future perspectives opened by this new generation of devices, such as their use in wearable devices and in decentralized settings are discussed.

Carbon nanotube-based aptasensors for the rapid and ultrasensitive detection of bacteria.

In this paper we present a new generation of potentiometric biosensors based on carbon nanotubes (transducer layer of the biosensor) and aptamers (sensing layer of the biosensor) for the ultralow and selective detection of microorganisms. We show that with these aptasensors we were able to detect a few CFU of the target bacteria almost in real-time, both in buffered and in real samples.

Potentiometric sensors using cotton yarns, carbon nanotubes and polymeric membranes.

A simple and generalized approach to build electrochemical sensors for wearable devices is presented. Commercial cotton yarns are first turned into electrical conductors through a simple dyeing process using a carbon nanotube ink. These conductive yarns are then partially coated with a suitable polymeric membrane to build ion-selective electrodes. Potentiometric measurements using these yarn-potentiometric sensors are demonstrated. Examples of yarns that can sense pH, K(+) and NH4(+) are presented. In all cases, these sensing yarns show limits of detection and linear ranges that are similar to those obtained with lab-made solid-state ion-selective electrodes. Through the immobilization of these sensors in a band-aid, it is shown that this approach could be easily implemented in a wearable device. Factors affecting the performance of the sensors and future potential applications are discussed.

A potassium sensor based on non-covalent functionalization of multi-walled carbon nanotubes.

Non-covalent functionalization of multi-walled carbon nanotubes (MWCNTs) by a pyrene based benzo-18-crown-6 ether 1 leads to nanostructure assemblies that play both the role of an ion-to-electron transducer and a selective recognition element in solid-contact ion-selective-electrodes (SC-ISEs). The high loading capacity (36 wt%) as well as the suitable dispersion character of the MWCNT hybrid in the ion-selective membrane (ISM) confirmed the benefit of this approach over the covalent one. The sensor has been applied successfully to the detection of potassium. Nernstian response (56.9 ± 0.9 mV per decade) was obtained (10(-5) and 10(-2) M K(+)) and the selectivity pattern was not altered by the immobilization of the ionophore on the MWCNTs. Leakage of the ionophore from the polymeric matrix is therefore avoided while the sensor construction was simplified and the analytical performances were maintained.

Protein detection with potentiometric aptasensors: a comparative study between polyaniline and single-walled carbon nanotubes transducers.

A comparison study on the performance characteristics and surface characterization of two different solid-contact selective potentiometric thrombin aptasensors, one exploiting a network of single-walled carbon nanotubes (SWCNTs) and the other the polyaniline (PANI), both acting as a transducing element, is described in this work. The molecular properties of both SWCNT and PANI surfaces have been modified by covalently linking thrombin binding aptamers as biorecognition elements. The two aptasensors are compared and characterized through potentiometry and electrochemical impedance spectroscopy (EIS) based on the voltammetric response of multiply charged transition metal cations (such as hexaammineruthenium, [Ru(NH3)6](3+)) bound electrostatically to the DNA probes. The surface densities of aptamers were accurately determined by the integration of the peak for the reduction of [Ru(NH3)6](3+) to [Ru(NH3)6](2+). The differences and the similarities, as well as the transduction mechanism, are also discussed. The sensitivity is calculated as 2.97 mV/decade and 8.03 mV/decade for the PANI and SWCNTs aptasensors, respectively. These results are in accordance with the higher surface density of the aptamers in the SWCNT potentiometric sensor.

Ultrasensitive and real-time detection of proteins in blood using a potentiometric carbon-nanotube aptasensor.

Potentiometric sensing represents the preferred technique in many routine measurements of pH and ions. Unfortunately, the simplicity of the technique has not been exploited so far in high throughput biomolecular sensing. In this work, we demonstrate the capabilities of the hybrid functional material carbon nanotubes/aptamer for the creation of a new generation of nuclease-resistant aptasensors using the potentiometric transduction capabilities of single-walled carbon nanotubes in combination with the recognition capabilities of a protein-specific RNA aptamer. The aptasensor was used to detect and identify disease-related proteins at attomolar concentration values in a rapid and non-expensive way. The variable surface glycoprotein from African Trypanosomes was chosen as an ideal model system for a pathogenic exoantigen protein in a clinical sample. Variations in the electromotive force are achieved in real-time upon the direct addition of diluted real blood samples containing the target protein thus eliminating the need of preliminary matrix removal. This work would open the door to real-time diagnostic assays for a wide range of diseases, but also to the rapid molecular detection of several proteins in truly customizable protein biosensing platforms.

Paper-based ion-selective potentiometric sensors.

A new approach to develop ultra low-cost, robust, rugged, and disposable potentiometric sensors is presented. A suspension of carbon nanotubes in a water-surfactant mixture (carbon nanotubes ink) is applied on conventional filter papers to turn them into conductive papers, which are then used as a substrate to build ion-selective electrodes. The electrodes are made by drop casting a membrane on a small circular area of the conductive paper. In this way, the carbon nanotubes act as both electric conductors and ion-to-electron transducers of the potentiometric signal. Electrodes for sensing K(+), NH(4)(+), and pH were built and tested using this approach, and the results were compared with classical solid-state ion selective electrodes using carbon nanotubes as transducers and glassy carbon as a substrate. In all cases, the analytical performance (sensitivity, linear ranges, limits of detection, selectivity, etc.) of these disposable paper electrodes was similar to that obtained for the more conventional type of ion-selective-electrodes. This opens new avenues for very low-cost platforms for generation of chemical information.

Label-free detection of Staphylococcus aureus in skin using real-time potentiometric biosensors based on carbon nanotubes and aptamers.

In this paper we report the first biosensor that is able to detect Staphylococcus aureus in real-time. A network of single-walled carbon nanotubes (SWCNTs) acts as an ion-to-electron potentiometric transducer and anti-S. aureus aptamers are the recognition element. Carbon nanotubes were functionalized with aptamers using two different approaches: (1) non-covalent adsorption of drop-casted pyrenil-modified aptamers onto the external walls of the SWCNTs; and (2) covalent bond formation between amine-modified aptamers and carboxylic groups previously introduced by oxidation at the ends of the SWCNTs. Both of these approaches yielded functional biosensors but there were large differences in the minimum detectable bacteria concentration and sensitivity values. With covalent functionalization, the minimum concentration detected was 8×10(2)colony-forming units (CFU)/mL and the sensitivity was 0.36 mV/Decade. With the non-covalent approach, the sensitivity was higher (1.52 mV/Decade) but the minimum concentration detected was greatly affected (10(7) CFU/mL). In both cases, potential as a function of Decade of bacteria concentration was linear. Functional biosensors were used to test real samples from freshly excised pig skin, contaminated with the target microorganism, as a surrogate for human skin.

Potentiometric strip cell based on carbon nanotubes as transducer layer: toward low-cost decentralized measurements.

In this study, we developed a potentiometric planar strip cell based on single-walled carbon nanotubes that aims to exploit the attributes of solid-contact ion-selective electrodes for decentralized measurements. That is, the ion-selective and reference electrodes have been simultaneously miniaturized onto a plastic planar substrate by screen-printing and drop-casting techniques, obtaining disposable strip cells with satisfactory performance characteristics (i.e., the sensitivity is 57.4 ± 1.3 mV/dec, the response time is ≤30 s within the linear range from log a(K+) = -5 to -2, and the limit of detection is -6.5), no need of maintenance during long dry storage, quick signal stabilization, and light insensitivity in short-term measurements. We also show how the new potentiometric strip cell makes it possible to perform decentralized and rapid determinations of ions in real samples, such as saliva or beverages.

Disposable planar reference electrode based on carbon nanotubes and polyacrylate membrane.

In this technical note, we report a new all-solid-state planar reference electrode based on single-walled carbon nanotubes and photocured poly(n-butylacrylate) (poly(nBA)) membrane containing the Ag/AgCl/Cl(-) ion system. Single-walled carbon nanotubes functionalized with octadecylamide (SWCNT-ODA) and deposited by drop-casting onto a disposable screen-printed electrode are an excellent all-solid-state transducer. The novel potentiometric planar reference electrode shows low potential variability (calibration slopes inferior to 2 mV/dec) for a wide range of chemical species (i.e., ions, small molecules, proteins) in a wide calibration range, redox pairs, changes in pH, and changes in ambient light. Potentiometric medium-term signal stability (-0.9 ± 0.2 mV/h) and electrochemical impedance characterization confirm the correct solid contact between the SWCNT-ODA layer and photocured poly(nBA) membrane. Overall, the materials used and the simple fabrication by screen-printing and drop-casting enable a high throughput and highly parallel and cost-effective mass manufacture of the new disposable reference electrode. Moreover, the reference electrode has a long shelf life, a characteristic that can be of special interest in decentralized and multiplexing potentiometric analysis.

Solid-state reference electrodes based on carbon nanotubes and polyacrylate membranes.

A novel potentiometric solid-state reference electrode containing single-walled carbon nanotubes as the transducer layer between a polyacrylate membrane and the conductor is reported here. Single-walled carbon nanotubes act as an efficient transducer of the constant potentiometric signal originating from the reference membrane containing the Ag/AgCl/Cl(-) ions system, and they are needed to obtain a stable reference potentiometric signal. Furthermore, we have taken advantage of the light insensitivity of single-walled carbon nanotubes to improve the analytical performance characteristics of previously reported solid-state reference electrodes. Four different polyacrylate polymers have been selected in order to identify the most efficient reservoir for the Ag/AgCl system. Finally, two different arrangements have been assessed: (1) a solid-state reference electrode using photo-polymerised n-butyl acrylate polymer and (2) a thermo-polymerised methyl methacrylate:n-butyl acrylate (1:10) polymer. The sensitivity to various salts, pH and light, as well as time of response and stability, has been tested: the best results were obtained using single-walled carbon nanotubes and photo-polymerised n-butyl acrylate polymer. Water transport plays an important role in the potentiometric performance of acrylate membranes, so a new screening test method has been developed to qualitatively assess the difference in water percolation between the polyacrylic membranes studied. The results presented here open the way for the true miniaturisation of potentiometric systems using the excellent properties of single-walled carbon nanotubes.

An effective nanostructured assembly for ion-selective electrodes. An ionophore covalently linked to carbon nanotubes for Pb2+ determination.

We report on the synthesis of a new hybrid material, i.e. benzo-18-crown-6 covalently linked to multi-wall carbon nanotubes, and its use in solid-state ion-selective electrodes both as a receptor and an ion-to-electron transducer. This new concept leads to potentiometric sensors with extremely high selectivity.