Electrochemical CO2 Activation and Valorization on Metallic Copper and Carbon-Embedded N-Coordinated Single Metal MNC Catalysts.

The electrochemical reductive valorization of CO2, referred to as the CO2RR, is an emerging approach for the conversion of CO2-containing feeds into valuable carbonaceous fuels and chemicals, with potential contributions to carbon capture and use (CCU) for reducing greenhouse gas emissions. Copper surfaces and graphene-embedded, N-coordinated single metal atom (MNC) catalysts exhibit distinctive reactivity, attracting attention as efficient electrocatalysts for CO2RR. This review offers a comparative analysis of CO2RR on copper surfaces and MNC catalysts, highlighting their unique characteristics in terms of CO2 activation, C1/C2(+) product formation, and the competing hydrogen evolution pathway. The assessment underscores the significance of understanding structure-activity relationships to optimize catalyst design for efficient and selective CO2RR. Examining detailed reaction mechanisms and structure-selectivity patterns, the analysis explores recent insights into changes in the chemical catalyst states, atomic motif rearrangements, and fractal agglomeration, providing essential kinetic information from advanced in/ex situ microscopy/spectroscopy techniques. At the end, this review addresses future challenges and solutions related to today's disconnect between our current molecular understanding of structure-activity-selectivity relations in CO2RR and the relevant factors controlling the performance of CO2 electrolyzers over longer times, with larger electrode sizes, and at higher current densities.

Distortion-Induced Interfacial Charge Transfer at Single Cobalt Atom Secured on Ordered Intermetallic Surface Enhances Pure Oxygen Production.

In this work, atomic cobalt (Co) incorporation into the Pd2Ge intermetallic lattice facilitates operando generation of a thin layer of CoO over Co-substituted Pd2Ge, with Co in the CoO surface layer functioning as single metal sites. Hence the catalyst has been titled Co1-CoO-Pd2Ge. High-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy confirm the existence of CoO, with some of the Co bonded to Ge by substitution of Pd sites in the Pd2Ge lattice. The role of the CoO layer in the oxygen evolution reaction (OER) has been verified by its selective removal using argon sputtering and conducting the OER on the etched catalyst. In situ X-ray absorption near-edge structure and extended X-ray absorption fine structure spectroscopy demonstrate that CoO gets transformed to CoOOH (Co3+) in operando condition with faster charge transfer through Pd atoms in the core Pd2Ge lattice. In situ Raman spectroscopy depicts the emergence of a CoOOH phase on applying potential and shows that the phase is stable with increasing potential and time without getting converted to CoO2. Density functional theory calculations indicate that the Pd2Ge lattice induces distortion in the CoO phase and generates unpaired spins in a nonmagnetic CoOOH system resulting in an increase in the OER activity and durability. The existence of spin density even after electrocatalysis is verified from electron paramagnetic resonance spectroscopy. We have thus successfully synthesized intermetallic supported CoO during synthesis and rigorously verified the role played by an intermetallic Pd2Ge core in enhancing charge transfer, generating spin density, improving electrochemical durability, and imparting mechanical stability to a thin CoOOH overlayer. Differential electrochemical mass spectrometry has been explored to visualize the instantaneous generation of oxygen gas during the onset of the reaction.

Selective Metal-Free CO2 Photoreduction in Water Using Porous Nanostructures with Internal Molecular Free Volume.

The conversion of CO2 to a sole carbonaceous product using photocatalysis is a sustainable solution for alleviating the increasing levels of CO2 emissions and reducing our dependence on nonrenewable resources such as fossil fuels. However, developing a photoactive, metal-free catalyst that is highly selective and efficient in the CO2 reduction reaction (CO2RR) without the need for sacrificial agents, cocatalysts, and photosensitizers is challenging. Furthermore, due to the poor solubility of CO2 in water and the kinetically and thermodynamically favored hydrogen evolution reaction (HER), designing a highly selective photocatalyst is challenging. Here, we propose a molecular engineering approach to design a photoactive polymer with high CO2 permeability and low water diffusivity, promoting the mass transfer of CO2 while suppressing HER. We have incorporated a contorted triptycene scaffold with "internal molecular free volume (IMFV)" to enhance gas permeability to the active site by creating molecular channels through the inefficient packing of polymer chains. Additionally, we introduced a pyrene moiety to promote visible-light harvesting capability and charge separation. By leveraging these qualities, the polymer exhibited a high CO generation rate of 77.8 µmol g-1 h-1, with a high selectivity of ∼98% and good recyclability. The importance of IMFV was highlighted by replacing the contorted triptycene unit with a planar scaffold, which led to a selectivity reversal favoring HER over CO2RR in water. In situ electron paramagnetic resonance (EPR), time-resolved photoluminescence spectroscopy (TRPL), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) techniques, further supported by theoretical calculations, were employed to enlighten the mechanistic insight for metal-free CO2 reduction to exclusively CO in water.

Bismuth-catalyzed arylation of ethyl glyoxylate with aniline via N-H insertion.

Glycine derivatives such as ethyl 2-(4-aminophenyl)-2-(phenylamino) acetate is an exciting and essential non-proteinogenic class of amino acids. Herein, we report an efficient and novel route to synthesize glycine derivatives using ethyl glyoxylate, aniline, and its derivatives catalyzed by bismuth salts. In our scheme, mild, non-toxic, and commercially viable reagents were utilized. The synthesized moieties were characterized by ESI-MASS, 1H-NMR, 13C-NMR, and XRD techniques. The target glycine derivatives were successfully obtained with a maximum yield of 87%. Moreover, the reaction is very green as water is the only byproduct.

Intrinsic Charge Polarization in Bi19 S27 Cl3 Nanorods Promotes Selective CC Coupling Reaction during Photoreduction of CO2 to Ethanol.

Obtaining multi-carbon products via CO2  photoreduction is a major catalytic challenge involving multielectron-mediated CC bond formation. Complex design of multicomponent interfaces that are exploited to achieve this chemical transformation, often leads to untraceable deleterious changes in the interfacial chemical environment affecting CO2  conversion efficiency and product selectivity. Alternatively, robust metal centers having asymmetric charge distribution can effectuate CC coupling reaction through the stabilization of intermediates, for desired product selectivity. However, generating inherent charge distribution in a single component catalyst is a difficult material design challenge. Here, a novel photocatalyst, Bi19 S27 Cl3 , is presented which selectively converts CO2  to a C2  product, ethanol, in high yield under visible light irradiation. Structural analysis through transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy reveals the presence of charge polarized bismuth centers in Bi19 S27 Cl3 . The intrinsic electric field induced by charge polarized bismuth centers renders better separation efficiency of photogenerated electron-hole pair. Furthermore, charge polarized centers yield better adsorption of CO* intermediate and accelerate the rate determining CC coupling step through the formation of OCCOH intermediate. Formation of these intermediates is experimentally mapped by in situ Fourier-transform infrared spectroscopy and further confirmed by theoretical calculation.

Wurtzite CuGaS2 with an In-Situ-Formed CuO Layer Photocatalyzes CO2 Conversion to Ethylene with High Selectivity.

We present surface reconstruction-induced C-C coupling whereby CO2 is converted into ethylene. The wurtzite phase of CuGaS2. undergoes in situ surface reconstruction, leading to the formation of a thin CuO layer over the pristine catalyst, which facilitates selective conversion of CO2 to ethylene (C2 H4 ). Upon illumination, the catalyst efficiently converts CO2 to C2 H4 with 75.1 % selectivity (92.7 % selectivity in terms of Relectron ) and a 20.6 µmol g-1 h-1 evolution rate. Subsequent spectroscopic and microscopic studies supported by theoretical analysis revealed operando-generated Cu2+ , with the assistance of existing Cu+ , functioning as an anchor for the generated *CO and thereby facilitating C-C coupling. This study demonstrates strain-induced in situ surface reconstruction leading to heterojunction formation, which finetunes the oxidation state of Cu and modulates the CO2 reduction reaction pathway to selective formation of ethylene.

In Situ Mechanistic Insights for the Oxygen Reduction Reaction in Chemically Modulated Ordered Intermetallic Catalyst Promoting Complete Electron Transfer.

The well-known limitation of alkaline fuel cells is the slack kinetics of the cathodic half-cell reaction, the oxygen reduction reaction (ORR). Platinum, being the most active ORR catalyst, is still facing challenges due to its corrosive nature and sluggish kinetics. Many novel approaches for substituting Pt have been reported, which suffer from stability issues even after mighty modifications. Designing an extremely stable, but unexplored ordered intermetallic structure, Pd2Ge, and tuning the electronic environment of the active sites by site-selective Pt substitution to overcome the hurdle of alkaline ORR is the main motive of this paper. The substitution of platinum atoms at a specific Pd position leads to Pt0.2Pd1.8Ge demonstrating a half-wave potential (E1/2) of 0.95 V vs RHE, which outperforms the state-of-the-art catalyst 20% Pt/C. The mass activity (MA) of Pt0.2Pd1.8Ge is 320 mA/mgPt, which is almost 3.2 times better than that of Pt/C. E1/2 and MA remained unaltered even after 50,000 accelerated degradation test (ADT) cycles, which makes it a promising stable catalyst with its activity better than that of the state-of-the-art Pt/C. The undesired 2e- transfer ORR forming hydrogen peroxide (H2O2) is diminished in Pt0.2Pd1.8Ge as visible from the rotating ring-disk electrode (RRDE) experiment, spectroscopically visualized by in situ Fourier transform infrared (FTIR) spectroscopy and supported by computational studies. The effect of Pt substitution on Pd has been properly manifested by X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS). The swinging of the oxidation state of atomic sites of Pt0.2Pd1.8Ge during the reaction is probed by in situ XAS, which efficiently enhances 4e- transfer, producing an extremely low percentage of H2O2.

First Principle Studies to Tailor Graphene Through Synergistic Effect as a Highly Efficient Electrocatalyst for Oxygen Evolution Reaction.

The Oxygen Evolution Reaction (OER) is one of the major roadblocks for electrocatalytic oxidation of water (water splitting) and for designing efficient metal-air batteries. Herein, we present a comprehensive study to design graphene based efficient electrocatalyst, modified by doping with main group elements Al, Si, P, S and co-doping with B and N, for OER using DFT computations. Four elementary steps in the OER reaction have been traced, free energy change for each elementary step was calculated considering thermodynamic corrections. Out of all the doped models, S doped graphene shows maximum efficiency that was further enhanced by adjusting the concentration of codopants B and N around the active dopant site. Our results show that synergy between codopants B and N and dopant S atom leads to high electrocatalytic efficiency of modified graphene towards OER and brings down the overpotential to as low as 0.44 V.

To Evaluate the Efficiency of Dexmedetomidine in Atomized Intranasal form for Sedation in Minor Oral Surgical Procedures.

AIM: This study aims to evaluate the efficiency of dexmedetomidine in atomized intranasal form for sedation in minor oral surgical procedures. MATERIALS AND METHODS: A total 25 patients fitting the inclusion and exclusion criteria were selected from the outpatient Department of Oral and Maxillofacial Surgery, Saraswati Dental College and Hospital, Lucknow. The drug was administered intranasally half an hour before the surgical procedure. The volume of drug used was recorded. The readings of all the parameters of sedation began 30 min after the drug had been administered. Intranasal sedation status was assessed by Ramsay sedation score and observer's assessment of alertness/sedation scales, every 15 min throughout the procedure. RESULTS: The primary outcome variable in this study is depth of sedation produced by intranasally administered dexmedetomidine. Secondary variables included respiratory rate, blood pressure (BP), heart rate (HR), and oxygen saturation (SpO2). The statistical software used was SPSS 20.0 for Windows (SPSS, Chicago, IL, USA). Data were expressed as mean and standard deviation or number (percentages). Sedation and behavior scores were analyzed by proportions. Hemodynamic variables including HR, SpO2, and BP and respiratory rate were analyzed by repeated measures ANOVA. When a significant result was obtained, the Tukey test was applied for post hoc pairwise comparisons. P < 0.05 was considered as statistically significant. All the parameters were recorded at a set interval of time. CONCLUSION: In conclusion, intranasal administration of 1.5 mg/kg atomized dexmedetomidine was clinically effective, convenient, and safe for the sedation of patients undergoing minor oral surgical procedures.

Single-Atom Catalysis Using Chromium Embedded in Divacant Graphene for Conversion of Dinitrogen to Ammonia.

Reduction of dinitrogen to ammonia under ambient conditions is a long-standing challenge. The few metal-based catalysts proposed have conspicuous disadvantages such as high cost, high energy consumption, and being hazardous to the environment. Single-atom catalysis has emerged as a new frontier in heterogeneous catalysis and metal atoms atomically dispersed on supports receive more and more attention owing to rapid advances in synthetic methodologies and computational modeling. Herein, we propose metal atoms embedded in divacant graphene as a catalyst for N2 fixation based on density functional calculations. We systematically investigate the potential of using transition metal like Cr, Mn, Fe, Mo and Ru as catalysts and our study reveals that Cr embedded in graphene exhibit good catalytic activity for N2 fixation. The synergy between the metal atoms and graphene surface provides a stable support to the metal center that has a high spin density to promote adsorption of N2 and activation of its N≡N triple bond. Our study deciphers the mechanism of conversion of N2 to ammonia following two possible reaction pathways, distal and enzymatic routes, via sequential protonation and reduction of activated N2 . The study provides a rational framework for conversion of dinitrogen to ammonia using single atom catalyst.

Dispersion corrected density functional study of CO oxidation on pristine/functionalized/doped graphene surfaces in aqueous phase.

The catalytic oxidation of CO by molecular oxygen (O2) over graphene, epoxy functionalized graphene and sulphur doped graphene surface is investigated theoretically by employing dispersion corrected Density Functional Theory. The adsorption of O2 and CO molecules over the pristine, functionalized and doped graphene surface has been compared. The channel for oxidation of CO to CO2 is elucidated in detail in the presence of aqueous solvent. Computations suggest that catalytic cycle of CO oxidation is initiated through the ER-mechanism, with the formation of a carbonate intermediate, the second pre-adsorbed CO reacts with the carbonate intermediate through LH-mechanism whereby, two CO2 molecules are released and adsorption surface becomes available for the subsequent reaction. The activation barrier for CO oxidation is considerably lowered in the case of oxidation over functionalized 12.45kcal/mol and doped 14.52kcal/mol graphene surface in comparison to the observed barrier of 23.98kcal/mol for the pristine graphene.

Theoretical study of adsorption of amino acids on graphene and BN sheet in gas and aqueous phase with empirical DFT dispersion correction.

Understanding interactions of biomolecules with nanomaterials at the molecular level is crucial to design new materials for practical use. In the present study, adsorption of three distinct types of amino acids, namely, valine, arginine and aspartic acid, over the surface of structurally analogous but chemically different graphene and BN nanosheets has been explored within the formalism of DFT. The explicit dispersion correction incorporated in the computational methodology improves the accuracy of the results by accounting for long range van der Waals interactions and is essential for agreement with experimental values. The real biological environment has been mimicked by re-optimizing all the model structures in an aqueous medium. The study provides ample evidence in terms of adsorption energy, solvation energy, separation distance and charge analysis to conclude that both the nano-surfaces adsorb the amino acids with release of energy and there are no bonded interactions between the two. The polarity of the BN nanosheet provides it an edge over the graphene surface to have more affinity towards amino acids.