Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 5 de 5
Filter
Add more filters










Database
Language
Publication year range
1.
Waste Manag ; 184: 132-141, 2024 Jul 15.
Article in English | MEDLINE | ID: mdl-38815287

ABSTRACT

Future sustainability visions include clean, renewable energy from hydrogen, which can be produced, among other ways, by biomass steam gasification. This study explores strategies addressing the limitations in steam co-gasification of herbaceous biomass, using Monster-TUAT1 rice straw, a genetically modified rice plant with a taller and bigger stalk developed by Tokyo University of Agriculture and Technology (TUAT), and Giant Miscanthus, a promising energy crop, as the feedstock. Firstly, compared with the typical rice straw, the Monster TUAT1 demonstrated superior steam gasification performance with a 1.75 times higher hydrogen gas yield and 27.0 % less tar generation. With a focus on overcoming the challenges posed by high silica content in the Monster TUAT1, co-gasification of it with an energy crop of Giant Miscanthus was performed. However, even under the optimum operation condition (750 °C, steam flowrate: 0.15 g/min), the hydrogen gas yield was only 29.3 mmol/g-C with a tar yield of 27.6 %wt. and a carbon conversion efficiency of 45.9 %, which is deemed unsatisfactory for hydrogen production. Thus, strategies for enhancement were proposed, including the incorporation seaweed biochar with high alkali and alkaline earth species, calcined scallop shell powder, and alkali metal salt into the gasifier. Consequently, the introduction of 10 %wt. of calcined scallop shell resulted in an increase in H2 yield to 37.0 mmol/g-C and 24.3 % CO2 reduction. The addition of alkali metal salt led to 43.9 % increase of H2 product with a 15 %wt. tar yield. The most significant improvement occurred with the introduction of seaweed biochar at 50 %wt., increasing of the hydrogen gas yield to 62.0 mmol/g-C with 86 % of carbon conversion efficiency and tar reduction to 5.5 %. These findings demonstrate the viability of utilizing herbaceous biomass such as rice straw in conjunction with the strategic solutions of co-gasification to overcome constraints in improving hydrogen production.


Subject(s)
Biomass , Hydrogen , Oryza , Steam , Oryza/genetics , Charcoal
2.
Molecules ; 27(17)2022 Aug 26.
Article in English | MEDLINE | ID: mdl-36080265

ABSTRACT

Methane is one of the promising alternatives to non-renewable petroleum resources since it can be transformed into added-value hydrocarbon feedstocks through suitable reactions. The conversion of methane to methanol with a higher chemical value has recently attracted much attention. The selective oxidation of methane to methanol is often considered a "holy grail" reaction in catalysis. However, methanol production through the thermal catalytic process is thermodynamically and economically unfavorable due to its high energy consumption, low catalyst stability, and complex reactor maintenance. Photocatalytic technology offers great potential to carry out unfavorable reactions under mild conditions. Many in-depth studies have been carried out on the photocatalytic conversion of methane to methanol. This review will comprehensively provide recent progress in the photocatalytic oxidation of methane to methanol based on materials and engineering perspectives. Several aspects are considered, such as the type of semiconductor-based photocatalyst (tungsten, titania, zinc, etc.), structure modification of photocatalyst (doping, heterojunction, surface modification, crystal facet re-arrangement, and electron scavenger), factors affecting the reaction process (physiochemical characteristic of photocatalyst, operational condition, and reactor configuration), and briefly proposed reaction mechanism. Analysis of existing challenges and recommendations for the future development of photocatalytic technology for methane to methanol conversion is also highlighted.

3.
Phys Chem Chem Phys ; 24(7): 4196-4203, 2022 Feb 16.
Article in English | MEDLINE | ID: mdl-35119442

ABSTRACT

Understanding the factors that influence the activity of a catalyst toward CH4 activation is of high importance for tuning the catalyst performance or designing new, better catalysts. Here, we performed a set of density functional theory (DFT) calculations on the H-CH3 bond cleavage over the Cu-O-Cu active site in the MOR zeolite with various Al-pair arrangements to obtain molecular insight into the structure-activity relation and clarify key parameters that define the Cu-O-Cu reactivity toward CH4. We found that weakening of the Cu-O-Cu bond during CH4 activation is crucial for determining the O-H bond strength and thus the Cu-O-Cu reactivity. In this regard, the zeolite lattice constraints are found to play a significant role as, on the one hand, it strengthens the Cu⋯Cu interaction and consequently weakens the Cu-O-Cu bonds and, on the other hand, it forces the Cu-O-Cu bond elongation process to destabilize the active site structure. The non-planar Cu-O-Cu geometry, due to lattice constraints, is also found to make the CH4 adsorption site, whether positioned closer to the µ-O or the Cu atom, crucial in determining the C-H activation product, i.e., a ˙CH3 radical or a Cu2-CH3- ligand.

4.
RSC Adv ; 10(46): 27713-27719, 2020 Jul 21.
Article in English | MEDLINE | ID: mdl-35516932

ABSTRACT

Defect engineering of semiconductor photocatalysts is considered as an evolving strategy to adjust their physiochemical properties and boost photoreactivity of the materials. Here, hydrogenation and UV light pre-treatment of TiO2/SiO2 composite with the ratio of 9 : 1 (9TiO2/1SiO2) were conducted to generate Ti3+ and non-bridging oxygen holes center (NBOHC) defects, respectively. The 9TiO2/1SiO2 composite exhibited much higher photocatalytic water splitting than neat TiO2 and SiO2 as a consequence of the electronic structure effects induced by the defect sites. Electron paramagnetic resonance (EPR) indicated that hydrogenated and UV light pre-treated of 9TiO2/1SiO2 boosted a higher density of Ti3+ and NBOHC defect which could serve to suppress photogenerated electron-hole pair recombination and act as shallow donors to trap photoexcited electron. Overall, both defect sites in 9TiO2/1SiO2 delivered advantageous characteristic relative to neat TiO2 and SiO2 with the finding clearly illustrating the value of defect engineering in enhancing photocatalytic performance.

5.
Bioresour Technol ; 179: 518-523, 2015 Mar.
Article in English | MEDLINE | ID: mdl-25576987

ABSTRACT

Four high silica zeolites, i.e., HSZ-385, 890, 960, and 990 were utilized for the selective catalytic conversion of bio-oil from Fallopia japonica to certain chemicals in a fixed-bed reactor. The Beta-type HSZ-960 zeolite showed the highest selectivity to hydrocarbons, especially to aromatics as well as PAH compounds with the lowest unwanted chemicals while HSZ-890 showed high selectivity to aromatics. NH3-Temperature Programmed Desorption (TPD) analysis indicated that different amounts of acid sites in different zeolites determined the catalytic activity for the oxygen removal from bio-oil, in which the acid sites at low temperature (LT) region gave more contribution within the utilized temperature region. The reusability test of HSZ-960 showed the stability of hydrocarbons yield at higher temperature due to the significant contribution of coke gasification which assisted further deoxygenation of bio-oil. These results provide a guidance to select suitable zeolite catalysts for the upgrading of bio-oil in a practical process.


Subject(s)
Biofuels/analysis , Oils/analysis , Silicon Dioxide/chemistry , Zeolites/chemistry , Acids/chemistry , Catalysis , Hydrocarbons/analysis , Recycling , Temperature
SELECTION OF CITATIONS
SEARCH DETAIL
...