A Solar to Chemical Strategy: Green Hydrogen as a Means, Not an End.

Green hydrogen is the key to the chemical industry achieving net zero emissions. The chemical industry is responsible for almost 2% of all CO2 emissions, with half of it coming from the production of simple commodity chemicals, such as NH3, H2O2, methanol, and aniline. Despite electrolysis driven by renewable power sources emerging as the most promising way to supply all the green hydrogen required in the production chain of these chemicals, in this review, it is worth noting that the photocatalytic route may be underestimated and can hold a bright future for this topic. In fact, the production of H2 by photocatalysis still faces important challenges in terms of activity, engineering, and economic feasibility. However, photocatalytic systems can be tailored to directly convert sunlight and water (or other renewable proton sources) directly into chemicals, enabling a solar-to-chemical strategy. Here, a series of recent examples are presented, demonstrating that photocatalysis can be successfully employed to produce the most important commodity chemicals, especially on NH3, H2O2, and chemicals produced by reduction reactions. The replacement of fossil-derived H2 in the synthesis of these chemicals can be disruptive, essentially safeguarding the transition of the chemical industry to a low-carbon economy.

Single-Atoms on Crystalline Carbon Nitrides for Selective C─H Photooxidation: A Bridge to Achieve Homogeneous Pathways in Heterogeneous Materials.

Single-atom catalysis is a field of paramount importance in contemporary science due to its exceptional ability to combine the domains of homogeneous and heterogeneous catalysis. Iron and manganese metalloenzymes are known to be effective in C─H oxidation reactions in nature, inspiring scientists to mimic their active sites in artificial catalytic systems. Herein, a simple and versatile cation exchange method is successfully employed to stabilize low-cost iron and manganese single-atoms in poly(heptazine imides) (PHI). The resulting materials are employed as photocatalysts for toluene oxidation, demonstrating remarkable selectivity toward benzaldehyde. The protocol is then extended to the selective oxidation of different substrates, including (substituted) alkylaromatics, benzyl alcohols, and sulfides. Detailed mechanistic investigations revealed that iron- and manganese-containing photocatalysts work through a similar mechanism via the formation of high-valent M═O species. Operando X-ray absorption spectroscopy (XAS) is employed to confirm the formation of high-valent iron- and manganese-oxo species, typically found in metalloenzymes involved in highly selective C─H oxidations.

Carbon nitride based materials: more than just a support for single-atom catalysis.

Recently, the missing link between homogeneous and heterogeneous catalysis has been found and it was named single-atom catalysis (SAC). However, the SAC field still faces important challenges, one of which is controlling the bonding/coordination between the single atoms and the support in order to compensate for the increase in surface energy when the particle size is reduced due to atomic dispersion. Excellent candidates to meet this requirement are carbon nitride (CN)-based materials. Metal atoms can be firmly trapped in nitrogen-rich coordination sites in CN materials, which makes them a unique class of hosts for preparing single-atom catalysts (SACs). As one of the most promising two-dimensional supports to stabilize isolated metal atoms, CN materials have been increasingly employed for preparing SACs. Herein, we will cover the most recent advances in single-atoms supported by CN materials. In this review, the most important characterization techniques and the challenges faced in this topic will be discussed, and the commonly employed synthetic methods will be delineated for different CN materials. Finally, the catalytic performance of SACs based on carbon nitrides will be reviewed with a special focus on their photocatalytic applications. In particular, we will prove CN as a non-innocent support. The relationship between single-atoms and carbon nitride supports is two-way, where the single-atoms can change the electronic properties of the CN support, while the electronic features of the CN matrix can tune the catalytic activity of the single sites in photocatalytic reactions. Finally, we highlight the frontiers in the field, including analytical method development, truly controlled synthetic methods, allowing the fine control of loading and multi-element synthesis, and how understanding the two-way exchange behind single-atoms and CN supports can push this topic to the next level.

Modified Poly(Heptazine Imides): Minimizing H2O2 Decomposition to Maximize Oxygen Reduction.

Photocatalysis provides a sustainable pathway to produce the consumer chemical H2O2 from atmospheric O2 via an oxygen reduction reaction (ORR). Such an alternative is attractive to replace the cumbersome traditional anthraquinone method for H2O2 synthesis on a large scale. Carbon nitrides have shown very interesting results as heterogeneous photocatalysts in ORR because their covalent two-dimensional (2D) structure is believed to increase selectivity toward the two-electron process. However, an efficient and scalable application of carbon nitrides for this reaction is far from being achieved. Poly(heptazine imides) (PHIs) are a more powerful subgroup of carbon nitrides whose structure provides high crystallinity and a scaffold to host transition-metal single atoms. Herein, we show that PHIs functionalized with sodium and the recently reported fully protonated PHI exhibit high activity in two-electron ORR under visible light. The latter converted O2 to up to 1556 mmol L-1 h-1 g-1 H2O2 under 410 nm irradiation using inexpensive but otherwise chemically demanding glycerin as a sacrificial electron donor. We also prove that functionalization with transition metals is not beneficial for H2O2 synthesis, as the metal also catalyzes its decomposition. Transient photoluminescence spectroscopy suggests that H-PHIs exhibit higher activity due to their longer excited-state lifetime. Overall, this work highlights the high photocatalytic activity of the rarely examined fully protonated PHI and represents a step forward in the application of inexpensive covalent materials for photocatalytic H2O2 synthesis.

Hot Electrons, Hot Holes, or Both? Tandem Synthesis of Imines Driven by the Plasmonic Excitation in Au/CeO2 Nanorods.

Solar-to-chemical conversion via photocatalysis is of paramount importance for a sustainable future. Thus, investigating the synergistic effects promoted by light in photocatalytic reactions is crucial. The tandem oxidative coupling of alcohols and amines is an attractive route to synthesize imines. Here, we unravel the performance and underlying reaction pathway in the visible-light-driven tandem oxidative coupling of benzyl alcohol and aniline employing Au/CeO2 nanorods as catalysts. We propose an alternative reaction pathway for this transformation that leads to improved efficiencies relative to individual CeO2 nanorods, in which the localized surface plasmon resonance (LSPR) excitation in Au nanoparticles (NPs) plays an important role. Our data suggests a synergism between the hot electrons and holes generated from the LSPR excitation in Au NPs. While the oxygen vacancies in CeO2 nanorods trap the hot electrons and facilitate their transfer to adsorbed O2 at surface vacancy sites, the hot holes in the Au NPs facilitate the α-H abstraction from the adsorbed benzyl alcohol, evolving into benzaldehyde, which then couples with aniline in the next step to yield the corresponding imine. Finally, cerium-coordinated superoxide species abstract hydrogen from the Au surface, regenerating the catalyst surface.

Marrying SPR excitation and metal-support interactions: unravelling the contribution of active surface species in plasmonic catalysis.

Plasmonic catalysis takes advantage of the surface plasmon resonance (SPR) excitation to drive or accelerate chemical transformations. In addition to the plasmonic component, the control over metal-support interactions in these catalysts is expected to strongly influence the performances. For example, CeO2 has been widely employed towards oxidation reactions due to its oxygen mobility and storage properties, which allow for the formation of Ce3+ sites and adsorbed oxygen species from metal-support interactions. It is anticipated that these species may be activated by the SPR excitation and contribute to the catalytic activity of the material. Thus, a clear understanding of the role played by the SPR-mediated activation of surface oxide species at the metal-support interface is needed in order to take advantage of this phenomenon. Herein, we describe and quantify the contribution from active surface oxide species at the metal-support interface (relative to O2 from air) to the activities in green SPR-mediated oxidation reactions. We employed CeO2 decorated with Au NPs (Au/CeO2) as a model plasmonic catalyst and the oxidation of p-aminothiophenol (PATP) and aniline as proof-of-concept transformations. We compared the results with SiO2 decorated with Au NPs (Au/SiO2), in which the formation of surface oxide species at the metal-support interface is not expected. We found that the SPR-mediated activation of surface oxide species at the metal-support interface in Au/CeO2 played a pivotal role in the detected activities, being even higher than the contribution coming from the activation of O2 from air.