Understanding the Biosynthetic Changes that Give Origin to the Distinctive Flavor of Sotol: Microbial Identification and Analysis of the Volatile Metabolites Profiles During Sotol (Dasylirion sp.) Must Fermentation.

In northern Mexico, the distilled spirit sotol with a denomination of origin is made from species of Dasylirion. The configuration of the volatile metabolites produced during the spontaneous fermentation of Dasylirion sp. must is insufficiently understood. In this study, the aim was to investigate the composition of the microbial consortia, describe the variation of volatile metabolites, and relate such profiles with their particular flavor attributes during the fermentation of sotol (Dasylirion sp.) must. Ascomycota was the phylum of most strains identified with 75% of total abundance. The genus of fermenting yeasts constituted of 101 Pichia strains and 13 Saccharomyces strains. A total of 57 volatile metabolites were identified and grouped into ten classes. The first stage of fermentation was composed of diesel, green, fruity, and cheesy attributes due to butyl 2-methylpropanoate, octan-1-ol, ethyl octanoate, and butanal, respectively, followed by a variation to pungent and sweet descriptors due to 3-methylbutan-1-ol and butyl 2-methylpropanoate. The final stage was described by floral, ethereal-winey, and vinegar attributes related to ethyl ethanimidate, 2-methylpropan-1-ol, and 2-hydroxyacetic acid. Our results improve the knowledge of the variations of volatile metabolites during the fermentation of sotol must and their contribution to its distinctive flavor.

Streptophyta and Acetic Acid Bacteria Succession Promoted by Brass in Slow Sand Filter System Schmutzdeckes.

Macro- and microorganism activities are important for the effectiveness of the slow sand filtration (SSF), where native microorganisms remove contaminants mainly by substrate competition, predation, and antagonism. The aim of the present study was to evaluate the addition of the oligodynamic metals iron, copper, and brass, inserted separately into SSF to enhance pollutant removal in water samples. Four laboratory-scale SSFs were built and tested: control, iron, copper, and brass. Water analysis included physicochemical evaluation, total and fecal coliform quantification. An analysis on microbial communities in the SSFs schmutzdecke was achieved by using 16S rRNA amplification, the Illumina MiSeq platform, and the QIIME bioinformatics software. The results demonstrated that inorganic and organic contaminants such as coliforms were removed up to 90%. The addition of metals had no significant effect (p > 0.05) on the other parameters. The microbial community analysis demonstrated different compositions of the SSF with brass-influent, where the eukaryote Streptophyta was predominant (31.4%), followed by the acetic acid bacteria Gluconobacter (24.6%), and Acetobacteraceae (7.7%), these genera were absent in the other SSF treatments. In conclusion, the use of a SSF system can be a low cost alternative to reduce microbial contamination in water and thus reduce gastrointestinal diseases in rural areas.

Characterization of a Microbial Consortium for the Bioremoval of Polycyclic Aromatic Hydrocarbons (PAHs) in Water.

Pollution of freshwater ecosystems from polycyclic aromatic hydrocarbons (PAHs) is a global concern. The US Environmental Protection Agency (EPA) has included the PAHs pyrene, phenanthrene, and naphthalene among the 16 priority compounds of special concern for their toxicological effects. The aim of this study was to adapt and characterize a microbial consortium from ore waste with the potential to remove these three PAHs from water. This microbial consortium was exposed to the target PAHs at levels of 5, 10, 20, 50, and 100 mg L−1 for 14 days. PAH bioremoval was measured using the analytical technique of solid phase microextraction, followed by gas chromatography mass spectrometry (SPME-GC/MS). The results revealed that up to 90% of the target PAHs can be removed from water after 14 days at a concentration level of 100 mg L−1. The predominant group of microorganisms identified at the phylum taxonomic level were the Proteobacteria, while the Actinobacteria were the predominant subgroup. The removal of phenanthrene, naphthalene, and pyrene predominantly occurred in specimens of genera Stenotrophomonas, Williamsia, and Chitinophagaceae, respectively. This study demonstrates that the use of specific microorganisms is an alternative method of reducing PAH levels in water.

Levels and Distribution of Pollutants in the Waters of an Aquatic Ecosystem in Northern Mexico.

The availability of good quality water resources is essential to ensure healthy crops and livestock. The objective of this study was to evaluate the level of pollution in Bustillos Lagoon in northern Mexico. Physical-chemical parameters like sodium, chloride, sulfate, electrical conductivity, nitrates, and the pesticide dichlorodiphenyltrichloroethane (DDT) were analyzed to determine the water quality available in the lagoon. Although DDT has been banned in several countries, it is still used for agricultural purposes in Mexico and its presence in this area had not been analyzed previously. Bustillos Lagoon was divided into three zones for the evaluation: (1) industrial; (2) communal lands; and (3) agricultural. The highest concentrations of sodium (2360 mg/L) and SAR (41 meq/L) reported in the industrial zone are values exceeding the United Nations Food and Agricultural Organization (FAO) irrigation water quality guidelines. DDT and its metabolites were detected in all of the 21 sites analyzed, in the agricultural zone ∑DDTs = 2804 ng/mL, this level is much higher than those reported for other water bodies in Mexico and around the world where DDT has been used heavily. The water in the communal zone is the least contaminated, but can only be recommended for irrigation of plants with high stress tolerance and not for crops.

Mass balance and mass loading of polybrominated diphenyl ethers (PBDEs) in a tertiary wastewater treatment plant using SBSE-TD-GC/MS.

A mass loading and mass balance analysis was performed on selected polybromodiphenyl ethers (PBDEs) in the first full-scale indirect potable reuse treatment plant in the United States. Chemical analysis of PBDEs was performed using an environmentally friendly sample preparation technique, called stir-bar sorptive extraction (SBSE), coupled with thermal desorption and gas chromatography/mass spectrometry (GC/MS). The three most dominant PBDEs found in all the samples were: BDE-47, BDE-99 and BDE-100. In the wastewater influent, the concentrations of studied PBDEs ranged from 94 to 775 ng/L, and in the effluent, the levels were below the detection limit. Concentrations in sludge ranged from 50 to 182 ng/g. In general, a removal efficiency of 92-96% of the PBDEs in the plant was accomplished through primary and secondary processes. The tertiary treatment process was able to effectively reduce the aforementioned PBDEs to less than 10 ng/L (>96% removal efficiency) in the effluent. If PBDEs remain in the treated wastewater effluent, they may pose environmental and health impacts through aquifer recharge, irrigation, and sludge final disposal.