ABSTRACT
Tightly focused 515-nm, 0.3-ps laser pulses modify in a laser filamentation regime the crystalline structure of an Ib-type high-pressure, high-temperature (HPHT) synthesized diamond in a thin-plate form. The modified microregions (micromarks) in the yellow and colorless crystal zones, possessing different concentrations of elementary substitutional nitrogen (N) impurity atoms (C-centers), exhibit their strongly diminished local IR absorption (upon correction to the thickness scaling factor). Simultaneously, local visible-range (400-550 nm) absorption coefficients were increased, and photoluminescence (PL) yield was strongly enhanced in the broad range of 450-800 nm. The strong yellow-red PL enhancement saturates with laser exposure, implying the complete conversion of C-centers into nitrogen-vacancy (NV0,-) ones due to the laser-induced generation of Frenkel "interstitial-vacancy" I-V carbon pairs. The other emerging blue-green (>470 nm) and green-yellow (>500 nm) PL bands were also simultaneously saturated versus the laser exposure. The observed IR/optical absorption and PL spectral changes enlighten the ultrashort pulse laser inscription of NV0--based quantum-emitter centers in synthetic diamonds and enable the evaluation of the productivity of their inscription along with the corresponding I-V generation rates.
ABSTRACT
Natural IaA+B diamonds were exposed in their bulk by multiple 0.3 ps, 515 nm laser pulses focused by a 0.25 NA micro-objective, producing in the prefocal region (depth of 20-50 µm) a bulk array of photoluminescent nanostructured microtracks at variable laser exposures and pulse energies. These micromarks were characterized at room (25°) and liquid nitrogen cooling (-120 °C) temperatures through stationary 3D scanning confocal photoluminescence (PL) microspectroscopy at 405 and 532 nm excitation wavelengths. The acquired PL spectra exhibit a linearly increasing pulse-energy-dependent yield in the range of 575 to 750 nm (NV0, NV- centers) at the expense of the simultaneous reductions in the blue-green (450-570 nm; N3a, H4, and H3 centers) and near-IR (741 nm; V0 center) PL yield. A detailed analysis indicates a low-energy rise in PL intensity for B2-related N3a, H4, and H3 centers, while at higher, above-threshold pulse energies it decreases for the H4, H3, and N3a centers, converting into NV centers, with the laser exposure effect demonstrating the same trend. The intrinsic and (especially) photo-generated vacancies were considered to drive their attachment as separate species to nitrogen centers at lower vacancy concentrations, while at high vacancy concentrations the concerted splitting of highly aggregated nitrogen centers by the surrounding vacancies could take place in favor of resulting NV centers.
ABSTRACT
Elongated photoluminescent micromarks were inscribed inside a IaAB-type natural diamond in laser filamentation regime by multiple 515 nm, 0.3 ps laser pulses tightly focused by a 0.25 NA micro-objective. The micromark length, diameter and photoluminescence contrast scaled as a function of laser pulse energy and exposure, coming to a saturation. Our Raman/photoluminescence confocal microscopy studies indicate no structural diamond damage in the micromarks, shown as the absent Raman intensity variation versus laser energy and exposition along the distance from the surface to the deep mark edge. In contrast, sTable 3NV (N3)-centers demonstrate the pronounced increase (up to 40%) in their 415 nm zero-phonon line photoluminescence yield within the micromarks, and an even higher-ten-fold-increase in NV0-center photoluminescence yield. Photogeneration of carbon Frenkel "interstitial-vacancy" (I-V) pairs and partial photolytic dissociation of the predominating 2N (A)-centers were suggested to explain the enhanced appearance of 3NV- and NV-centers, apparently via vacancy aggregation with the resulting N (C)-centers or, consequently, with 2N- and N-centers.
ABSTRACT
Petroleum coke is one of the waste products generated in the oil refining industry that can be used as fuel in energetics. However, the low volatile matter content and graphite-like structure of petroleum coke are the reasons for its high ignition temperature and combustion complexity. In this research, petroleum coke combustion and oxidation kinetics in the presence of metal catalysts were investigated. To evaluate the effect of the catalyst on the ignition temperature and the apparent activation energy, a new approach of a "fixed fluidized bed" was proposed. In this mode, petroleum coke particles spaced from each other by inert quartz powder kind of "freeze" in the porous layer. This regime allows us to determine the ignition temperature of petroleum coke particles in the static mode by differential thermography and calculate the activation energy by gas analysis. Organic and inorganic salts of copper, iron, and cerium are used as catalysts for petroleum coke combustion. A series of experiments were carried out in the porous media thermo-effect cell (PMTEC) and on a thermogravimetric (TG) analyzer. The kinetics of the combustion processes was calculated by Kissinger-Akahira-Sunose and Ozawa-Flynn-Wall methods. The results obtained in the "fixed bed" mode showed that the ignition temperature and the average apparent activation energy significantly decreased in the presence of CuCl2 and FeCl3. The results obtained by the new approach were compared with the results of the thermogravimetric analysis.
