Liquid-liquid and solid-liquid extractions with low-temperature partitioning - A review.

The paper represents the first review of solvent extraction techniques utilizing the low-temperature partitioning/purification (LTP) approach. Initially conceived in the 1960s to purify extracts from fatty matrices, it wasn't until the 2000s that this approach received increasing attention for its efficacy in extracting organic compounds from diverse samples, often without additional cleanup steps. This review covers a brief history and proposes a mechanism for LTP-based solvent extraction. Furthermore, the principal practical issues of the technique are spotlighted, elucidating the factors influencing extraction efficiency. The advantages, limitations, and potential combinations with other extraction techniques of the LTP-based solvent extractions are analyzed. The versatility of the LTP approach is demonstrated by its applications in extracting various compounds from food, environmental, and biological samples, emphasizing its potential for rapid sample preparation with minimal steps, few chemicals, and minimal analyst intervention.

Evaluation of imazalil dissipation/migration in postharvest papaya using low-temperature partition extraction and GC-MS analysis.

Methods involving solid-liquid extraction with low-temperature partition and analysis by gas chromatography coupled to mass spectrometry (GC-MS) were validated to investigate the dissipation/migration of residues of the postharvest fungicide imazalil in papaya skin, pulp, and seeds. The fruits were stored for 23 days (14 °C). Every two days, fruits from the control group and those treated with imazalil had their skin, outer pulp, inner pulp, and seeds separated and then analyzed by GC-MS. After the 23rd day, about 70% of the imazalil had dissipated. Most of the remaining residue was found in the skin; however, the small amount migrating into the pulp was above the maximum residue levels allowed by the regulatory agencies. Imazalil residue was also detected in seeds at concentrations lower than the LOQ (0.025 mg kg-1). Mass loss was the only quality parameter that showed a significant difference between the fruits of the control and study groups.

Toxicological Stability of Ocimum basilicum Essential Oil and Its Major Components in the Control of Sitophilus zeamais.

Essential oils (EOs) are widely recognized as efficient and safe alternatives for controlling pest insects in foods. However, there is a lack of studies evaluating the toxicological stability of botanical insecticides in stored grains in order to establish criteria of use and ensure your efficiency. The objective of this work was to evaluate the toxicological stability of basil essential oil (O. basilicum) and its linalool and estragole components for Sitophilus zeamais (Motschulsky) adults in corn grains by fumigation. The identification of the chemical compounds of the essential oil was performed with a gas chromatograph coupled to a mass selective detector. Mortality of insects was assessed after 24 h exposure. After storage for six (EO) and two months (linalool and estragole) under different conditions of temperature (5, 20, and 35 °C) and light (with and without exposure to light), its toxicological stability was evaluated. Studies revealed that the essential oil of O. basilicum and its main components exhibited insecticidal potential against adults of S. zeamais. For greater toxicological stability, suitable storage conditions for them include absence of light and temperatures equal to or less than 20 °C.

Method Validation and Evaluation of Safrole Persistence in Cowpea Beans Using Headspace Solid-Phase Microextraction and Gas Chromatography.

Bioinsecticides are regarded as important alternatives for controlling agricultural pests. However, few studies have determined the persistence of these compounds in stored grains. This study aimed at optimizing and validating a fast and effective method for extraction and quantification of residues of safrole (the main component of Piper hispidinervum essential oil) in cowpea beans. It also sought to assess the persistence of this substance in the grains treated by contact and fumigation. The proposed method used headspace solid-phase microextraction (HS-SPME) and gas chromatography with a flame ionization detector (GC/FID). Factors such as temperature, extraction time and type of fiber were assessed to maximize the performance of the extraction technique. The performance of the method was appraised via the parameters selectivity, linearity, limit of detection (LOD), limit of quantification (LOQ), precision, and accuracy. The LOD and LOQ of safrole were 0.0057 and 0.019 µg kg-1, respectively and the determination coefficient (R2) was >0.99. The relative recovery ranged from 99.26 to 104.85, with a coefficient of variation <15%. The validated method was applied to assess the persistence of safrole residue in grains, where concentrations ranged from 1.095 to 0.052 µg kg-1 (contact) and from 2.16 to 0.12 µg kg -1 (fumigation). The levels measured up from the fifth day represented less than 1% of the initial concentration, proving that safrole have low persistence in cowpea beans, thus being safe for bioinsecticide use. Thus, this work is relevant not only for the extraction method developed, but also for the possible use of a natural insecticide in pest management in stored grains.

The efficacy of washing strategies in the elimination of fungicide residues and the alterations on the quality of bell peppers.

Food safety problems caused by pesticide residues in vegetables have become a top issue to raise public concern. In this study, bell peppers were grown in an experimental field and sprayed with two systemic (azoxystrobin and difenoconazole) and one contact (chlorothalonil) fungicides. Ozone (ozonated water and water continuously bubble with ozone) or conventional domestic (washing with distilled water, detergent, acetic acid, sodium bicarbonate, and sodium hypochlorite solutions) procedures were investigated to identify the most effective way to remove fungicide residues in bell peppers. The residues in the fruits and the washing solutions were determined by solid-liquid extraction with a low-temperature partition (SLE/LTP) and liquid-liquid extraction with a low-temperature partition (LLE/LTP), respectively, and analyzed by gas chromatography. Water continuously bubbled with ozone a concentration of 3 mg L-1 was the most efficient treatment with removal of fungicides residues ranging from 67% to 87%. However, similar treatment at a lower concentration (1 mg L-1) did not only efficiently removed fungicide residues (between 53% and 75%) but also preserving the quality of the fruit along a storage time of 13 days. Among the conventional solutions, sodium bicarbonate at 5% showed good efficiency removing between 60% and 81% of the fungicide residues from bell peppers, affecting the color quality of the fruit. Overall, the most affected physicochemical parameters in bell peppers after the treatments were weight loss, color, and vitamin C content.

Headspace Solid-Phase Microextraction: Validation of the Method and Determination of Allyl Isothiocyanate Persistence in Cowpea Beans.

Essential oils are widely recognized as an efficient and safe alternative for controlling pests in foods. However, a few studies have determined the persistence of these compounds in stored grains. The present study optimized and validated a fast and effective method for extraction and quantification of allyl isothiocyanate (AITC-the main component of mustard essential oil) residue in cowpea beans. It also investigated the persistence of this substance in the grains. The proposed method employs headspace solid-phase microextraction (HS-SPME) and gas chromatography with a flame ionization detector (GC/FID). For optimizing it, a central composite design (CCD) was used, where the best conditions for the extraction of the AITC were achieved using 15 min fiber exposure at 30 °C. The performance of the method was assessed by studying selectivity, linearity, limits of detection (LOD) and quantification (LOQ), precision, and accuracy. The LOD and LOQ for AITC were 0.11 and 0.33 µg kg-1, respectively. The determination coefficient (R 2) was above 0.99. The relative recovery rate ranged from 108.2 to 114.8%, with an interday coefficient of variation below 9%. After 36 h, no residue was detected in the samples, demonstrating that the AITC has low persistence and can be safely used as a bioinsecticide for grains.

Optimal Extraction of Ocimum basilicum Essential Oil by Association of Ultrasound and Hydrodistillation and Its Potential as a Biopesticide against a Major Stored Grains Pest.

The essential oil of basil (Ocimum basilicum) has significant biological activity against insect pests and can be extracted through various techniques. This work aimed to optimize and validate the extraction process of the essential oil of O. basilicum submitted to different drying temperatures of the leaves and extracted by the combination of a Clevenger method and ultrasound. The biological activity of the extracted oil under different conditions was evaluated for potential control of Sitophilus zeamais. The extraction method was optimized according to the sonication time by ultrasound (0, 8, 19, 31 and 38 min) and hydrodistillation (20, 30, 45, 60 and 70 min) and drying temperature (20, 30, 45, 60 and 70 °C). The bioactivity of the essential oil was assessed against adults of S. zeamais and the effects of each variable and its interactions on the mortality of the insects were evaluated. The best yield of essential oil was obtained with the longest sonication and hydrodistillation times and the lowest drying temperature of leaves. Higher toxicity of the essential oil against S. zeamais was obtained by the use of ultrasound for its extraction. The identification and the relative percentage of the compounds of the essential oil were performed with a gas chromatograph coupled to a mass selective detector. The performance of the method was assessed by studying selectivity, linearity, limits of detection (LOD) and quantification (LOQ), precision and accuracy. The LOD and LOQ values for linalool were 2.19 and 6.62 µg mL-1 and for estragole 2.001 and 6.063 µg mL-1, respectively. The coefficients of determination (R2) were >0.99. The average recoveries ranged between 71 and 106%, with coefficient of variation ≤6.4%.

Use of ozone and detergent for removal of pesticides and improving storage quality of tomato.

The efficiencies of two conventional domestic procedures (immersion in pure water and detergent solution at 0.25 and 1%) and two treatments using ozone (immersion in water with bubbling O3 and immersion in ozonated water, both at 1 and 3 mg L-1) were evaluated for the removal of residues of the fungicides azoxystrobin, chlorothalonil and difenoconazole in tomatoes. The fungicides were sprayed on the fruits at the recommended concentration for the crop. The residues in the tomatoes and in the washing solutions were determined by extraction with low-temperature partition techniques and analysis by gas chromatography. More concentrated solutions were more effective in removing pesticide residues. The water bubbled with ozone at 3 mg L-1 was the most efficient treatment for the removal of fungicides, reaching a reduction of 70-90% of the residues. However, the treatments with the lowest concentration of ozone had lower loss of fruit mass during storage.