9-Borafluoren-9-yl and diphenylboron tetracoordinate complexes of F- and Cl-substituted 8-quinolinolato ligands: synthesis, molecular and electronic structures, fluorescence and application in OLED devices.

Six new four-coordinate tetrahedral boron complexes, containing 9-borafluoren-9-yl and diphenylboron cores attached to orthogonal fluorine- and chlorine-substituted 8-quinolinolato ligand chromophores, have been synthesised, characterised, and applied as emitters in organic light-emitting diodes (OLEDs). An extensive steady-state and time-resolved photophysical study, in solution and in the solid state, resulted in the first-time report of delayed fluorescence (DF) in solid films of 8-quinolinolato boron complexes. The DF intensity dependence on excitation dose suggests that this emission originates from triplet-triplet annihilation (TTA). Density functional theory (DFT) and time-dependent density functional theory (TDDFT) studies give insight into the ground and excited state geometries, electronic structures, absorption energies, and singlet-triplet gaps in these new organoboron luminophores. Finally, given their highly luminescent behaviour, organic light-emitting diode (OLED) devices were produced using the synthesised organoboron compounds as emissive fluorescent dopants. The best OLED displays green-blue (λmaxEL = 489 nm) electroluminescence with an external quantum efficiency (EQE) of 3.3% and a maximum luminance of 6300 cd m-2.

A Lab-Made E-Nose-MOS Device for Assessing the Bacterial Growth in a Solid Culture Medium.

The detection and level assessment of microorganisms is a practical quality/contamination indicator of food and water samples. Conventional analytical procedures (e.g., culture methods, immunological techniques, and polymerase chain reactions), while accurate and widely used, are time-consuming, costly, and generate a large amount of waste. Electronic noses (E-noses), combined with chemometrics, provide a direct, green, and non-invasive assessment of the volatile fraction without the need for sample pre-treatments. The unique olfactory fingerprint generated during each microorganism's growth can be a vehicle for its detection using gas sensors. A lab-made E-nose, comprising metal oxide semiconductor sensors was applied, to analyze solid medium containing Gram-positive (Enterococcus faecalis and Staphylococcus aureus) or Gram-negative (Escherichia coli and Pseudomonas aeruginosa) bacteria. The electrical-resistance signals generated by the E-nose coupled with linear discriminant analysis allowed the discrimination of the four bacteria (90% of correct classifications for leave-one-out cross-validation). Furthermore, multiple linear regression models were also established allowing quantifying the number of colony-forming units (CFU) (0.9428 ≤ R2 ≤ 0.9946), with maximum root mean square errors lower than 4 CFU. Overall, the E-nose showed to be a powerful qualitative-quantitative device for bacteria preliminary analysis, being envisaged its possible application in solid food matrices.

Rhamnolipids inhibit aflatoxins production in Aspergillus flavus by causing structural damages in the fungal hyphae and down-regulating the expression of their biosynthetic genes.

Aflatoxins are hepatotoxic and carcinogenic fungal secondary metabolites that usually contaminate crops and represent a serious health hazard for humans and animals worldwide. In this work, the effect of rhamnolipids (RLs) produced by Pseudomonas aeruginosa #112 on the growth and aflatoxins production by Aspergillus flavus MUM 17.14 was studied in vitro. At concentrations between 45 and 1500 mg/L, RLs reduced the mycelial growth of A. flavus by 23-40% and the production of aflatoxins by 93.9-99.5%. Purified mono-RLs and di-RLs exhibited a similar inhibitory activity on fungal growth. However, the RL mixture had a stronger inhibitory effect on aflatoxins production at concentrations up to 190 mg/L, probably due to a synergistic effect resulting from the combination of both congeners. Using transmission electron microscopy, it was demonstrated that RLs damaged the cell wall and the cytoplasmic membrane of the fungus, leading to the loss of intracellular content. This disruptive phenomenon explains the growth inhibition observed. Furthermore, RLs down-regulated the expression of genes aflC, aflE, aflP and aflQ involved in the aflatoxins biosynthetic pathway (6.4, 44.3, 38.1 and 2.0-fold, respectively), which is in agreement with the almost complete inhibition of aflatoxins production. Overall, the results herein gathered demonstrate for the first time that RLs could be used against aflatoxigenic fungi to attenuate the production of aflatoxins, and unraveled some of their mechanisms of action.

Luminescent halogen-substituted 2-(N-arylimino)pyrrolyl boron complexes: the internal heavy-atom effect.

A group of new boron complexes [BPh2{κ2N,N'-NC4H3-2-C(H)[double bond, length as m-dash]N-C6H4X}] (X = 4-Cl 4c, 4-Br 4d, 4-I 4e, 3-Br 4f, 2-Br 4g, 2-I 4h) containing different halogens as substituents in the N-aryl ring have been synthesized and characterized in terms of their molecular properties. Their photophysical characteristics have been thoroughly studied in order to understand whether these complexes exhibit an internal heavy-atom effect. Phosphorescence emission was found for some of the synthesized halogen-substituted boron molecules, particularly for 4g and 4h. DFT and TDDFT calculations showed that the lower energy absorption band resulted from the HOMO to LUMO (π-π*) transition, except for 2-I 4h, where the HOMO-1 to LUMO transition was also involved. The strong participation of iodine orbitals in HOMO-1 is reflected in the calculated absorption spectra of the iodine derivatives, especially 2-I 4h, when spin-orbit coupling (SOC) was included. Organic light-emitting diodes (OLEDs) based on these complexes, in the neat form or dispersed in a matrix, were also fabricated and tested. The devices based on films prepared by thermal vacuum deposition showed the best performance. When neat complexes were used, a maximum luminance (Lmax) of 1812 cd m-2 was obtained, with a maximum external quantum efficiency (EQEmax) of 0.15%. An EQEmax of ca. 1% along with a maximum luminance of 494 cd m-2 were obtained for a device fabricated by co-deposition of the boron complex and a host compound (1,3-bis(N-carbazolyl)benzene, mCP).

Boron complexes of aromatic 5-substituted iminopyrrolyl ligands: synthesis, structure, and luminescence properties.

A group of new mononuclear boron chelate compounds [BPh2{κ2N,N'-5-R-NC4H2-2-C(H)[double bond, length as m-dash]N-Ar}] (R = Ar = C6H57; R = C6H5, Ar = 2,6-iPr2C6H38; R = Anthracen-9-yl (Anthr), Ar = C6H59; R = Anthr, Ar = 2,6-iPr2C6H310) were synthesized via the reaction of B(C6H5)3 with the corresponding 5-substituted 2-(N-arylformimino)pyrrole ligand precursors 3-6. These complexes were prepared in order to evaluate the luminescence potential derived from the substitution of the position 5 of the pyrrolyl ring with an aromatic group. Compounds 7-10 were photophysically characterized in solution and in the solid state. The 5-phenyl-2-iminopyrrolyl-BPh2 complexes 7 and 8 are blue emitters and have enhanced photoluminescence quantum yields in the solid state (ΦPL) up to 0.95, whereas the 5-anthracenyl derivatives 9 and 10 have green-bluish fluorescence and a ΦPL of 0.49 and 0.24, respectively. DFT and TDDFT studies were performed, considering the effect of solvent and dispersion, in order to show how the geometries of compounds 7-10 changed from the ground to the excited state, to assign electronic transitions, and to rationalize the observed luminescence. These materials were applied in organic light-emitting diodes (OLEDs), with various device structures, the best showing an external quantum efficiency of 2.75% together with a high luminance of 23 530 cd m-2.

Sodium chloride effect on the aggregation behaviour of rhamnolipids and their antifungal activity.

In this work, the antifungal activity of rhamnolipids produced by Pseudomonas aeruginosa #112 was evaluated against Aspergillus niger MUM 92.13 and Aspergillus carbonarius MUM 05.18. It was demonstrated that the di-rhamnolipid congeners were responsible for the antifungal activity exhibited by the crude rhamnolipid mixture, whereas mono-rhamnolipids showed a weak inhibitory activity. Furthermore, in the presence of NaCl (from 375 mM to 875 mM), the antifungal activity of the crude rhamnolipid mixture and the purified di-rhamnolipids was considerably increased. Dynamic Light Scattering studies showed that the size of the structures formed by the rhamnolipids increased as the NaCl concentration increased, being this effect more pronounced in the case of di-rhamnolipids. These results were confirmed by Confocal Scanning Laser Microscopy, which revealed the formation of giant vesicle-like structures (in the µm range) by self-assembling of the crude rhamnolipid mixture in the presence of 875 mM NaCl. In the case of the purified mono- and di-rhamnolipids, spherical structures (also in the µm range) were observed at the same conditions. The results herein obtained demonstrated a direct relationship between the rhamnolipids antifungal activity and their aggregation behaviour, opening the possibility to improve their biological activities for application in different fields.

Calcium phosphates and silicon: exploring methods of incorporation.

BACKGROUND: Bioinorganics have been explored as additives to ceramic bone graft substitutes with the aim to improve their performance in repair and regeneration of large bone defects. Silicon (Si), an essential trace element involved in the processes related to bone formation and remodeling, was shown not only to enhance osteoblasts proliferation but also to stimulate the differentiation of mesenchymal stem cells (MSCs) and preosteoblasts into the osteogenic lineage. In this study, the added value of Si to calcium phosphate (CaP) coatings was evaluated. METHODS: Tissue culture plastic well plates were coated with a thin CaP layer to which traces amounts of Si were added, either by adsorption or by incorporation through coprecipitation. The physicochemical and structural properties of the coatings were characterized and the dissolution behavior was evaluated. The adsorption/incorporation of Si was successfully achieved and incorporated ions were released from the CaP coatings. Human MSCs were cultured on the coatings to examine the effects of Si on cell proliferation and osteogenic differentiation. For the statistical analysis, a one-way ANOVA with Bonferroni post-hoc test was performed. RESULTS: The results showed that human MSCs (hMSCs) responded to the presence of Si in the CaP coatings, in a dose-dependent manner. An increase in the expression of markers of osteogenic differentiation by human MSCs was observed as a result of the increase in Si concentration. CONCLUSIONS: The incorporation/adsorption of Si into CaP coatings was successfully achieved and hMSCs responded with an increase in osteogenic genes expression with the increase of Si concentration. Furthermore, hMSCs cultured on CaP-I coatings expressed higher levels of ALP and OP, indicating that this may be the preferred method of incorporation of bioinorganics into CaPs.

Unveiling the effect of three-dimensional bioactive fibre mesh scaffolds functionalized with silanol groups on bacteria growth.

The need to replace or repair deteriorating bones and simultaneously prevent the formation of bacteria biofilm without impairing local tissue integration has pushed scientists to look for new designs and processing methods to develop innovative biomaterials. Silicon-based biomaterials, widely studied for application in bone regeneration, have demonstrated antibacterial properties. Herein, the aim of this work is to investigate the potential of the functionalization of biomaterials surfaces with silanol groups to prevent the bacterial biofilm formation. For that, we evaluated the adherence and biofilm formation of Escherichia coli (E. coli, Gram negative) and Staphylococcus aureus (S. aureus, Gram positive) on starch-based scaffolds. Three-dimensional fibre meshes scaffolds were developed by wet-spinning and functionalized with silanol (Si-OH) groups using a calcium silicate solution as a nonsolvent. The functionalization of the scaffolds was confirmed by X-ray photoelectron spectroscopy. The developed scaffolds showed no biocide activity against the bacterial tested, although the colony-forming units (CFU) mL(-1) counts were significant lower between 4 and 12 h of incubation for both bacteria. The adherence of E. coli and S. aureus to the scaffolds was also investigated. After a growth period of 12 h, the SPCL scaffolds functionalized with Si-OH groups showed a reduced bacterial adherence of E. coli and S. aureus. The functionalized scaffolds showed a positive effect in preventing the formation of biofilm in the case of S. aureus, however, in the case of E. coli this was not observed, suggesting that silanol groups may only have a positive effect in preventing the proliferation of gram-positive bacteria. The in vitro biological assessment of the functionalized materials showed that these materials sustained cell proliferation and induced their osteogenic differentiation. The outcome of this work suggests that the presence of Si-OH groups in SPCL scaffolds maintained bactericidal activity against S. aureus. Further research is still needed in order to understand the full antibacterial potential of Si-OH groups. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2189-2199, 2016.

Valorization of agro-industrial wastes towards the production of rhamnolipids.

In this work, oil mill wastewater (OMW), a residue generated during olive oil extraction, was evaluated as an inducer of rhamnolipid production. Using a medium containing as sole ingredients corn steep liquor (10%, v/v), sugarcane molasses (10%, w/v) and OMW (25%, v/v), Pseudomonas aeruginosa #112 produced 4.5 and 5.1g of rhamnolipid per liter in flasks and reactor, respectively, with critical micelle concentrations as low as 13mg/l. Furthermore, in the medium supplemented with OMW, a higher proportion of more hydrophobic rhamnolipid congeners was observed comparing with the same medium without OMW. OMW is a hazardous waste which disposal represents a serious environmental problem; therefore, its valorization as a substrate for the production of added-value compounds such as rhamnolipids is of great interest. This is the first report of rhamnolipid production using a mixture of these three agro-industrial by-products, which can be useful for the sustainable production of rhamnolipids.

Biosurfactant production by Bacillus subtilis using corn steep liquor as culture medium.

In this work, biosurfactant production by Bacillus subtilis #573 was evaluated using corn steep liquor (CSL) as culture medium. The best results were obtained in a culture medium consisting of 10% (v/v) of CSL, with a biosurfactant production of about 1.3 g/l. To the best of our knowledge, this is the first report describing biosurfactant production by B. subtilis using CSL as culture medium. Subsequently, the effect of different metals (iron, manganese, and magnesium) on biosurfactant production was evaluated using the medium CSL 10%. It was found that for all the metals tested, the biosurfactant production was increased (up to 4.1, 4.4, and 3.5 g/l for iron, manganese, and magnesium, respectively). When the culture medium was supplemented with the optimum concentration of the three metals simultaneously, the biosurfactant production was increased up to 4.8 g/l. Furthermore, the biosurfactant exhibited a good performance in oil recovery assays when compared with chemical surfactants, which suggests its possible application in microbial enhanced oil recovery or bioremediation.

Elucidating the individual effects of calcium and phosphate ions on hMSCs by using composite materials.

The biological performance of bone graft substitutes based on calcium phosphate bioceramics is dependent on a number of properties including chemical composition, porosity and surface micro- and nanoscale structure. However, in contemporary bioceramics these properties are interlinked, therefore making it difficult to investigate the individual effects of each property on cell behavior. In this study we have attempted to investigate the effects of calcium and inorganic phosphate ions independent from one another by preparing composite materials with polylactic acid (PLA) as a polymeric matrix and calcium carbonate or sodium phosphate salts as fillers. Clinically relevant bone marrow derived human mesenchymal stromal cells (hMSCs) were cultured on these composites and proliferation, osteogenic differentiation and ECM mineralization were investigated with time and were compared to plain PLA control particles. In parallel, cells were also cultured on conventional cell culture plates in media supplemented with calcium or inorganic phosphate to study the effect of these ions independent of the 3D environment created by the particles. Calcium was shown to increase proliferation of cells, whereas both calcium and phosphate positively affected alkaline phosphatase enzyme production. QPCR analysis revealed positive effects of calcium and of inorganic phosphate on the expression of osteogenic markers, in particular bone morphogenetic protein-2 and osteopontin. Higher levels of mineralization were also observed upon exposure to either ion. Effects were similar for cells cultured on composite materials and those cultured in supplemented media, although ion concentrations in the composite cultures were lower. The approach presented here may be a valuable tool for studying the individual effects of a variety of soluble compounds, including bioinorganics, without interference from other material properties.

Combinatorial Effect of Silicon and Calcium Release from Starch-Based Scaffolds on Osteogenic Differentiation of Human Adipose Stem Cells.

Instructive materials able to drive cells, in particular the differentiation of stem cells toward osteoblastic lineages, have been investigated as a promising strategy for bone tissue engineering. Inorganic ions, such as phosphorus, calcium, silicon, and strontium, have been used in bone regeneration strategies as instructive ions for material-based approaches. The use of effective inorganic ions is being investigated as a promising approach for bone regeneration applications, mainly because they are highly available and cost-effective and thus reducing the need to use expensive and less-stable growth factors. The aim of the present study is to investigate the effect of the release of silicon (Si) and calcium (Ca) ions from a blend of starch and poly caprolactone (SPCL) scaffolds on the osteogenic behavior of human adipose stem cells (hASCs). The scaffolds were developed by a wet-spinning technique and two different solutions were used as coagulation bath, one containing Ca and Si ions and other one containing only Si ions. The composition of the scaffolds as well as their mechanical properties was also evaluated. Our study showed that both scaffolds were able to sustain cell attachment and induce their differentiation into the osteogenic lineage in basal medium, i.e., in the absence of osteogenic factors. The scaffolds containing both ions, Si and Ca, had a stronger influence on the osteogenic differentiation of hASCs than the scaffolds containing only Si ion. Thus, the present work highlights the importance of combining Si and Ca ions in the control of cellular response, namely, cell differentiation and/or in stem cells recruitment upon implantation of a cell-free scaffold, and thus, avoiding the use of costly growth factors.

Bioconversion of agro-industrial by-products in rhamnolipids toward applications in enhanced oil recovery and bioremediation.

In this work, biosurfactant production by a Pseudomonas aeruginosa strain was optimized using low-cost substrates. The highest biosurfactant production (3.2 g/l) was obtained using a culture medium containing corn steep liquor (10% (v/v)) and molasses (10% (w/v)). The biosurfactant reduced the surface tension of water up to 30 mN/m, and exhibited a high emulsifying activity (E24=60%), with a critical micelle concentration as low as 50 mg/l. The biosurfactant produced in this alternative medium was characterized as a mixture of eight different rhamnolipid congeners, being the most abundant the mono-rhamnolipid Rha-C10-C10. However, using LB medium, nine different rhamnolipid congeners were identified, being the most abundant the di-rhamnolipid Rha-Rha-C10-C10. The rhamnolipid mixture produced in the alternative medium exhibited a better performance in removing oil from contaminated sand when compared with two chemical surfactants, suggesting its potential use as an alternative to traditional chemical surfactants in enhanced oil recovery or bioremediation.

Biodegradation of ochratoxin A by Pediococcus parvulus isolated from Douro wines.

Lactic acid bacteria (LAB) are a promising solution to reduce exposure to dietary mycotoxins because of the unique mycotoxin decontaminating characteristic of some LAB. Ochratoxin A (OTA) is one of the most prominent mycotoxins found in agricultural commodities. The present work reports on the ability of Pediococcus parvulus strains that were isolated from Douro wines that spontaneously underwent malolactic fermentation to detoxify OTA. These strains were identified and characterised using a polyphasic approach that employed both phenotypic and genotypic methods. When cultivated on OTA-supplemented MRS media, OTA was biodegraded into OTα by certain P. parvulus strains. The presence of OTα was confirmed using LC-MS/MS. The conversion of OTA into OTα indicates that the OTA amide bond was hydrolysed by a putative peptidase. The rate of OTA biodegradation was found to be dependent on the inoculum size and on the incubation temperature. Adsorption assays with dead P. parvulus cells showed that approximately 1.3%±1.0 of the OTA was adsorbed onto cells wall, which excludes this mechanism in the elimination of OTA by strains that degrades OTA. Under optimum conditions, 50% and 90% of OTA were degraded in 6 and 19h, respectively. Other LAB strains that belonged to different species were tested but did not degrade OTA. OTA biodegradation by P. parvulus UTAD 473 was observed in grape must. Because some P. parvulus strains have relevant probiotic properties, the strains that were identified could be particularly relevant to food and feed applications to counteract the toxic effects of OTA.

Antioxidant Capacity, Cytotoxicity and Antimycobacterial Activity of Madeira Archipelago Endemic Helichrysum Dietary and Medicinal Plants.

The potential bioactivity of dietary and medicinal endemic Helichrysum plants from Madeira Archipelago was explored, for the first time, in order to supply new information for the general consumer. In vitro antioxidant properties were investigated using DPPH, ABTS(•+), FRAP and ß-Carotene assays, and the total phenolic content (TPC) and total flavonoid content (TFC) were also determined. Although the results generally showed a large variation among the three analyzed plants, the methanolic extracts showed the highest antioxidant capacity. Exception is made for H. devium n-hexane extract that showed good radical scavenger capacity associated to compounds with good reducing properties. In the Artemia salina toxicity assay and antimycobaterial activity, H. devium was the most potent plant with the lowest LD50 at 216.7 ± 10.4 and MIC ≤ 50 µg·mL(-1). Chemometric evaluation (Principal Component Analysis-PCA) showed close interdependence between the ABTS, TPC and TFC methods and allowed to group H. devium samples.

Outlook on the phase equilibria of the innovative system of "protected glycerol": 1,4-dioxaspiro[4.5]decane-2-methanol and alternative solvents.

Fundamental data on 1,4-dioxaspiro[4.5]decane-2-methanol are scarce. This work presents the foremost systematic data on the solubility of 1,4-dioxaspiro[4.5]decane-2-methanol in sustainable solvents such as water and ionic liquids accompanied by the interpretation of interactions occurring in such binary systems. 1,4-Dioxaspiro[4.5]decane-2-methanol, here called protected glycerol, has been synthesized in order to protect the two hydroxyl groups of glycerol, thus avoiding the formation of side products in a specific process. A series of imidazolium salts accompanied by pyridinium, phosphonium, and ammonium ones with various types of counterions were used in this study. The liquid-liquid and solid-liquid equilibrium measurements in binary systems were carried out by using a dynamic method at atmospheric pressure over the temperature range from 273.00 to 378.30 K or below the boiling point of the solvent. Among all tested sustainable solvents, protected glycerol exhibited limited solubility, with only a few of them in the temperature range studied. The majority of the examined ionic liquids, either hydrophilic or hydrophobic, showed complete miscibility with this monohydroxyol. The Fourier-transform infrared (FTIR) spectroscopy studies of solute and solvents showing a miscibility gap and of their mixtures were performed to obtain insight into major inter- and intramolecular interactions in the investigated systems. Furthermore, the differential scanning calorimetry was used for the first time to determine the melting point, the enthalpy of melting, and the temperature and enthalpy of the solid-solid phase transition of 1-allyl-3-methylimidazolium chloride [Amim][Cl]. The results for the solubility of protected glycerol in sustainable solvents can be used to design future alternative reactions, such as telomerization with protected glycerol in ionic liquids for more specific building blocks and extraction/or separation that involves these mixtures.

HPLC quantification of dye flavonoids in Reseda luteola L. from Portugal.

A HPLC method was developed for the simultaneous identification of Reseda luteola L. (weld) flavonoids and quantification of the main compounds responsible for the yellow color. This method was applied to a large number of wild Portuguese weld to evaluate its potential application as dyestuff for textile factories, as a substitute for the synthetic dyes currently used. Portuguese weld dyestuff content ranged between 1.04 and 5.87%, corresponding to a wide variation of the flavonoids amount (1.39-9.04%). Luteolin 4'-O-glucoside was found for the first time in R. luteola, but kaempferol, isorhamnetin, and their glycosides were not detected in the Portuguese specimens.

Quantification of artemisinin in Artemisia annua extracts by 1H-NMR.

Artemisinin is a polycyclic sesquiterpene lactone that is highly effective against multidrug-resistant strains of Plasmodium falciparum, the etiological agent of the most severe form of malaria. Determination of artemisinin in the source plant, Artemisia annua, is a challenging problem since the compound is present in very low concentrations, is thermolabile and unstable, and lacks chromophoric or fluorophoric groups. The ain of this study was to develop a simple protocol for the quantification of artemisinin in a plant extract using an (1)H-NMR method. Samples were prepared by extraction of leaf material with acetone, treatment with activated charcoal to remove chlorophylls and removal of solvent. (1)H-NMR spectra were measured on samples dissolved in deuterochloroform with tert-butanol as internal standard. Quantification was carried out using the using the delta 5.864 signal of artemisinin and the delta 1.276 signal of tert-butanol. The method was optimised and fully validated against a reference standard of artemisinin. The results were compared with those obtained from the same samples quantified using an HPLC-refractive index (RI) method. The (1)H-NMR method gave a linear response for artemisinin within the range 9.85-97.99 mm (r(2) = 0.9968). Using the described method, yields of artemisinin in the range 0.77-1.06% were obtained from leaves of the A. annua hybrid CPQBA x POP, and these values were in agreement with those obtained using an HPLC-RI.