Effect of Multiple Firings on the Microshear Bond Strength Between a Translucent Zirconia and a Resin Cement.

PURPOSE: This study investigated the microshear bond strength between a resin cement and a translucent zirconia subjected to multiple characterization firings. METHODS AND MATERIALS: 5Y-PSZ zirconia blocks (Katana UTML) were sliced, sintered (1550°C, 2 h), and randomly divided into six groups (n=10) according to the number of characterization firings (0, 1, 2, 3, 5, or 10) and aging (baseline or after thermocycling). Each characterization firing was performed at 750°C for 1 minute. The ceramic surfaces were all sandblasted with 50 µm Al2O3 and silanized. Then, cylinders of resin cement (0.96 mm diameter × 2 mm height) were bonded onto their surfaces. The baseline samples were immersed in distilled water for 24 hours before the microshear bond strength (µSBS) tests. The aged samples were tested after 5000 thermocycles in water (5°C-55°C). The failure modes were classified as adhesive, predominantly adhesive, or cohesive. Scanning electron microscope images of the failure modes and the ceramic surfaces after the firings were taken. The µSBS data were analyzed by two-way ANOVA and Tukey's test. RESULTS: The number of characterization firings and aging affected the bond strength. The highest bond strength values were observed from the 2-firing group at baseline. The µSBS results after 1, 2, or 3 characterization firings were similar at baseline and after aging. On the other hand, 0, 5, and 10 firings revealed the lowest bond strengths. The most frequent failures were adhesive and predominantly adhesive. Zirconia grains were not affected by the multiple firings. CONCLUSION: One to three characterization firings after sintering improve the bond strength of 5Y-PSZ to the resin cement when compared to none or several (five or ten) firing cycles.

A Critical Review of Dental Lithia-Based Glass-Ceramics.

The purpose of this article is to review current understanding of lithia-based glass-ceramics and to identify future research needs for this class of dental materials in relation to novel compositions and fabrication methods. With rapid advances in material development and digital technology, time efficiency of dental workflow and fit accuracy of ceramic restorations are ever improving. Lithia-based glass-ceramics are at the forefront of this advance-new variants with more efficient fabrication routes are continually being introduced into the marketplace. Base glass composition, crystallization heat treatment, nucleant and coloration additives, and property gradation are some pertinent variables. The trend in fabrication is to move from CAD/CAM grinding of partially crystallized glass-ceramics to fully crystallized materials, thereby circumventing the need for postmachining firing altogether. In these endeavors, a better understanding of mechanical properties and evolving shaping technologies, such as ductile grinding, is paramount. Additive manufacturing and 3-dimensional printing methodologies offer a promising alternative to current CAD/CAM subtractive manufacturing routes. Challenges to the implementation of new technologies in efficient development and production of high-quality dental glass-ceramic prostheses are addressed.

Exploring Ductility in Dental Ceramics.

Two damage regimes-"brittle" and "ductile"-have been identified in the literature on ceramic grinding, machining, grit blasting, and wear. In the brittle regime, the damage mechanism is essentially crack formation, while in the ductile region, it is quasiplasticity. Onset of the brittle mode poses the greater threat to strength, so it becomes important to understand the mechanics of ductile-brittle thresholds in these materials. Controlled microcontact tests with a sharp indenter are employed to establish such thresholds for a suite of contemporary computer-aided design/computer-aided manufacturing dental ceramics. Plots of flexural strength S versus indentation load P show a steep decline beyond the threshold, consistent with well-established contact mechanics relations. Threshold dimensions occur on a scale of order 1 µm and contact load of order 1 N, values pertinent to practical grit finishing protocols. The ductile side of ceramic shaping is accessed by reducing grit sizes, applied loads, and depths of cut below critical levels. It is advocated that critical conditions for ductile shaping may be most readily quantified on analogous S(P) plots, but with appropriate machining variable (grit size, depths of cut, infeed rate) replacing load P. Working in the ductile region offers the promise of compelling time and cost economies in prosthesis fabrication and preparation.

Repolishing Resin Composites After Bleaching Treatments: Effects on Color Stability and Smoothness.

This study aimed to evaluate the effect of repolishing after bleaching on color stability and smoothness of two resin composites aged in a high-staining beverage. Fifty-six disc-shaped specimens (8×2 mm) of each resin composite were fabricated (Filtek Z250, 3M ESPE, microhybrid, and Filtek Z350 XT, 3M ESPE, nanofilled) and then divided according to treatment: bleached or nonbleached. After treatment application, groups were subdivided according to the surface treatment: repolished or unrepolished. A new subdivision was performed according to aging conditions: immersion in red wine for 15 min/d or in artificial saliva for 24 h/d during 30 days. Color (CIE L*a*b* system) and roughness (Ra) were assessed at baseline (P0), after bleaching procedures (P1), after surface treatment (P2), and after aging (P3). Color change (ΔE00) was calculated through the CIEDE2000 formula. Statistical analysis was performed using repeated measures analysis of variance and the Tukey post hoc test. Bleached repolished groups presented lower color alteration than the bleached unrepolished groups from both resin composites when aged in red wine. Repolishing (P1 vs P2) promoted a slight decrease in roughness values of almost all groups. Nanofilled composite presented greater ΔE00 values than microhybrid composite when aged in red wine.

Mechanical characteristics of counterfeit Reciproc instruments: a call for attention.

AIM: To report the main differences seen by direct visual inspection between original and counterfeit Reciproc instruments, together with an evaluation of instrument bending resistance, cyclic fatigue, surface finish, Vickers microhardness and chemical composition. METHODOLOGY: The visual aspects of original Reciproc R25 (VDW, Munich, Germany) and counterfeit Reciproc R25 instruments (claimed to be original, supposedly with dimensions similar to those of Reciproc R25 files, bought at www.mercadolivre.com.br) were evaluated under direct observation, stereomicroscopy and scanning electron microscope. The flexibility of original and counterfeit Reciproc R25 was determined via 45° bending tests according to the ISO 3630-1 specification. Instruments were also subjected to cyclic fatigue resistance, measuring the time to fracture in an artificial stainless steel canal with a 60° angle and 5-mm radius of curvature. The fracture surfaces of all fragments were examined under a scanning electron microscope. Roughness of the instruments was quantified using a profilometer, and the microhardness test was carried out using a Vickers hardness tester. Energy-dispersive X-ray microanalysis (EDX) was also carried out. Results were analysed statistically using the Student's t-test at a significance level of P < 0.05. RESULTS: Although the packaging of the original and counterfeit instruments was similar, a number of differences were observed such as ISO colour coding, measurement marks, stopper and morphologic characteristics. Original Reciproc instruments had significantly longer cyclic fatigue life and significantly lower bending resistance than counterfeit Reciproc instruments (P < 0.05), as well as significantly lower microhardness and roughness (P < 0.05). EDX results revealed differences in the chemical composition of the instruments (P < 0.05), indicating that the instruments were manufactured with different raw material. CONCLUSION: Original Reciproc files outperformed counterfeit instruments in all tests. It is thus important that identification strategies for these counterfeit instruments be developed, thereby preventing their inadvertent use.

Inbreeding depression in single, three way and double-cross hybrids of maize.

Currently, one of the acclaimed alternatives for increasing maize yield is accomplished through utilization of heterosis in hybrid cultivars. However, upon performing crosses between related pairs, there are losses due to inbreeding depression. Thus, the aim of this study was to estimate inbreeding depression and the contribution of loci in heterozygosity in different types of maize hybrids. Eight treatments were evaluated, considering the F1 and S0 generations of four commercial hybrids. A randomized block experimental design was used, with three replications, and plots consisting of two three-meter long rows at a spacing of 0.50 m. The traits evaluated were plant height, first ear height and husked ear weight. For ear weight trait, there was a significant difference, where the treatments could be classified into three distinct groups. In this case, the single-cross hybrids AG7088 and 30F90Y exhibited greater depression through inbreeding due to the greater contribution of loci in heterozygosity and consequent predominance of deviations due to dominance.

Selection of inbred maize (Zea mays L.) progenies by topcrosses conducted in contrasting environments.

The aim of this study was to identify inbred progenies of S0:1 maize (Zea mays L.) plants that were efficient at a low level of technology and responsive at a high level of technology through the use of topcrosses. Two contrasting environments were created using two levels of base fertilization and topdressing, so that the levels of nitrogen, phosphorus, and potassium were applied four times higher in one environment than in the other. We used S0:1 progenies derived from commercial hybrids in topcrosses with two testers (an elite line from the flint heterotic group and an elite line from the dent heterotic group). The progenies and three controls were evaluated in an augmented block design in Nossa Senhora das Dores, SE, Brazil in the 2010 crop season. The average grain yield in the high-technological level was 21.44% greater than that in the low-technological level. There were no changes in progeny behavior in the two technological levels for grain yield. The testers did not differ in the average grain yield of the progenies at the two technological levels. Therefore, it is possible to select progenies derived from commercial hybrids that have an efficient response to fertilization.

Resistance of upland-rice lines to root-knot nematode, Meloidogyne incognita.

Despite the benefits of crop rotation, occurrence of nematodes is a common problem for almost all crops within the Cerrado biome, especially for rice. The use of resistant cultivars is one of the main methods for control of nematodes. Thus, the present study aimed to evaluate the reaction of 36 upland-rice lines, with desirable agronomic characteristics, according to their resistance to root-knot nematodes (Meloidogyne incognita). The experimental design was entirely randomized with four replications. Each plot of land consisted of two rice plants in a 3-L vase. The plants were inoculated with 1000 eggs and eventual juveniles of the respective nematodes. Fifty-five days after the inoculation, the roots and the aerial part of the plant were weighed and the egg mass (EM) as well as the reproduction factor (Rf) were estimated. It was determined that the isolated use of EM was not beneficial in selecting rice lines resistant to the root-knot nematode. This procedure must, therefore, take into account the egg counting and the Rf, in order to improve the reliability of the selection. In our study, 30 evaluated lines were observed to be resistant. Among the recommended cultivars, only BRS Monarca had its performance susceptible to the studied nematode species.

Revisão das Propriedades Medicinais de Cajanus cajanna Doença Falciforme / Review of Medicinal Cajanus cajan of properties in Sickle Cell Disease

RESUMO Este artigo descreve a ocorrência, características botânicas, fitoquímicas e a composição nutricional do feijão guandu [Cajanus cajan (L.) Millsp], e sua relação no processo de inibição da falcização na doença falciforme, um distúrbio genético que acomete as hemácias, gerando hemólise e anemia crônica. Dois constituintes químicos estariam mais relacionados aos efeitos inibitórios na falcização de células falciformes: L-fenilalanina e o ácido p-hidroxibenzóico. Estudos químico-biológicos detalhados com o feijão guandu no Brasil poderão esclarecer melhor os mecanismos pelos quais ocorre a inibição da falcização das hemácias e a diminuição do estresse oxidativo, ajudando no tratamento de pessoas com DF.

ABSTRACT This article describes the occurrence, botanical characteristics, phytochemical and nutritional composition of pigeonpea [Cajanus cajan (L.) Millsp], and their relationship in the process inhibition of sickling in sickle cell disease (SCD), a genetic disorder that affects red blood cells, causing hemolysis and chronic anemia. Two chemical components would be related to the inhibitory effect on sickling of sickle cells: the L-phenylalanine and the p- hydroxybenzoic acid. In Brazil, detailed studies with pigeonpea chemical-biological may clarify the mechanisms by which the inhibition of sickling of red blood cells occurs, reducing oxidative stress and thus helping treating people affected by this disease.

Application of denaturing gradient gel electrophoresis for detection of bacterial and yeast communities along a salinity gradient in the estuary of the Cachoeira River in Brazil.

An estuary is a transition zone between freshwater and marine ecosystems, resulting in dilution of seawater. Estuaries are also considered environments of intense biological activity related to the processes of nutrient cycling. The aim of this study was to evaluate the microbial community composition along a salinity gradient in the estuary of the Cachoeira River, located in southern Bahia, Brazil. The analysis of bacterial and yeast communities was performed by determining the denaturing gradient gel electrophoresis band richness. Formation of zones with similar profiles of bands was observed, and the increasing richness at the intermediate zone demonstrated a clear spatial distinction of communities depending on salinity. In addition, the dissolved oxygen content, temperature, pH, salinity, and dissolved inorganic nutrient contents (NH3(+), NO2(-), NO3(-), PO4(-)) were determined. Nutrients were distributed in similar patterns, with decreasing concentrations as the salinity increases.

The impact of folate pathway polymorphisms combined to nutritional deficiency as a maternal predisposition factor for Down syndrome.

Polymorphisms in genes encoding folate metabolizing enzymes have been linked to an increased risk of maternal chromosomal nondisjunction in several populations. With the purpose of evaluating this relationship, we compared the frequencies of 677C>T and 1298A>C polymorphisms in the methylenetetrahydrofolate reductase gene (MTHFR) and 66A>G in the methionine synthase reductase gene (MTRR) between 103 young mothers of Down syndrome (DS) individuals and 108 control mothers, whose offspring was karyotypically normal, correlating it with an estimative of folate and - related micronutrients levels intake. Maternal and paternal transmission frequencies of MTHFR 677T allele were also examined to access potential parent-of-origin effects. PCR-RFLP for genomic DNA was accomplished and allele/genotype frequencies differences were determined using the x(2) test, whereas pattern of transmission of the MTHFR 677 allele was analyzed by transmission disequilibrium test. None of the polymorphisms seemed to be more frequent in case mothers than in controls, either individually or combined. The estimative of nutritional intake revealed that folate consumption median was inadequate in both groups, whereas methionine and zinc consumption medians were significantly greater in control mothers. It suggests that such interaction between genetic profile and environment could predispose this sub group of women to have a DS child. Additional studies focusing the interaction between nutritional intakes, biochemical data and folate pathway polymorphisms are needed to confirm the present results. The possibility of neutralize the biochemical negative effects of folate-related polymorphisms through oral supplementation could provide new targets for DS prevention.

Use of bactec 460 TB system in the diagnosis of tuberculosis.

PURPOSE: To evaluate, the efficacy of BACTEC 460 TB system for the diagnosis of tuberculosis in a tertiary care hospital in Mumbai, India. METHODS: We compared 12,726 clinical specimens using BACTEC 460 TB system and conventional method for detection of Mycobacterium tuberculosis over a period of six years. RESULT: The overall recovery rate was 39% by BACTEC technique and 29% using Lowenstein-Jensen (LJ) medium. An average detection time for B actec0 460 TB system was found to be 13.3 days and 15.3 days as against 31.2 days and 35.3 days by LJ method for respiratory and nonrespiratory specimens respectively. The average reporting time for drug susceptibility results ranged from 6-10 days for the BACTEC 460 TB system. CONCLUSIONS: The BACTEC system is a good system for level II laboratories, especially in the diagnosis of extrapulmonary and smear negative tuberculosis.

The relationships between dietary guidelines, sugar intake and caries in primary teeth in low income Brazilian 3-year-olds: a longitudinal study.

OBJECTIVES: To investigate the effects of dietary guidelines on sugar and sugar intake at day nurseries, and other potential risk factors on dental caries in two groups of low socio-economic nursery schoolchildren. DESIGN: Nursery based, longitudinal study. SETTING: Metropolitan area of Recife, north-eastern Brazil. SAMPLE AND METHODS: The study population comprised 510, 3-year-old low socio-economic nursery schoolchildren. Sugar intake at the nursery was based upon a weighed inventory method during 2 non-consecutive days. Parents answered a questionnaire. RESULTS: Children attending nurseries not adopting guidelines on reduction of sugar intake had a higher caries risk, with an odds ratio of 3.6 compared to those attending nurseries with guidelines. A higher caries increment was related to higher daily frequency and weight of sugar intake at nursery, overall daily frequency of sugar intake (sugar intake at home plus nursery), past caries experience, use of fluoride, and habits related to toothbrushing. Children having more than 32.6 g of sugar daily at nursery were 2.99 times more likely to have high caries increment than those having less than that amount. CONCLUSIONS: Sugar intake at nursery and the adoption of guidelines on sugar were associated with lower caries increment in low income nursery schoolchildren. A number of modifiable factors such as a higher daily frequency and weight of sugar intake at nursery, use of fluoride and habits related to toothbrushing were strongly related to caries increment.

Incidence of type 1 diabetes mellitus in Passo Fundo, RS, Brazil

To establish the incidence of type 1 diabetes among children (infants to 14 years of age) in the city of Passo Fundo, Rio Grande do Sul, Brazil (population under 15 years = 50,098), during the period of January to December 1996, a retrospective and prospective population-based registry was established, using physician reports of newly diagnosed patients under 15 years of age with type 1 diabetes as the primary source of case identification. Primary and nursery schools and a general call through the media (newspapers, radio and television) was the secondary source. Data were calculated according to the methods recommended by the WHO (1990). Six new cases were identified. Case ascertainment was estimated at 100 percent. The incidence of type 1 diabetes in the year 1996 was 12/100,000 inhabitants. These data indicate that the incidence of childhood type 1 diabetes in a subtropical region in the Southern part of Brazil was similar to that observed in developed countries throughout the world. The inability to demonstrate the North-South gradient is probably due to the European origin of inhabitants of the city

Incidence of type 1 diabetes mellitus in Passo Fundo, RS, Brazil.

To establish the incidence of type 1 diabetes among children (infants to 14 years of age) in the city of Passo Fundo, Rio Grande do Sul, Brazil (population under 15 years = 50,098), during the period of January to December 1996, a retrospective and prospective population-based registry was established, using physician reports of newly diagnosed patients under 15 years of age with type 1 diabetes as the primary source of case identification. Primary and nursery schools and a general call through the media (newspapers, radio and television) was the secondary source. Data were calculated according to the methods recommended by the WHO (1990). Six new cases were identified. Case ascertainment was estimated at 100%. The incidence of type 1 diabetes in the year 1996 was 12/100,000 inhabitants. These data indicate that the incidence of childhood type 1 diabetes in a subtropical region in the Southern part of Brazil was similar to that observed in developed countries throughout the world. The inability to demonstrate the North-South gradient is probably due to the European origin of inhabitants of the city.