ABSTRACT
In this work, a bibliometric study was carried out to perform a scientific and technological analysis of exchange-spring magnets, an alternative permanent magnet synthesized by reducing or eliminating the use of critical raw materials, such as rare earths. The bibliometric analysis utilized the Scopus database, Orbit-Intellixir, VOSviewer, Orbit-Intelligence and Loglet Lab 4 software for maturity analysis, keyword network representations, charts and graphs for scientific articles and/or patents. A special analysis was performed on nanocomposite and thin-films systems based on Nd-Fe-B, SmCo5 and Mn-Al-C alloys, either mixed or layered with a soft magnetic phase, where relevant information on their magnetic parameters was compilated in tables, highlighting the nanostructured systems that have been exhibited the best permanent magnet properties. The bibliometric analysis revealed that the primary production of scientific articles is concentrated in industrialized countries, and they are predominantly published in journals dedicated to magnetism. A patents analysis showed that Nissan motors is by far the main applicant, with most of its patents is focused on technological domains related to electrical machinery, apparatus, energy and metallurgy. On the other hand, the S-curve of maturity for scientific articles indicated that the study of exchange-spring magnets is entering a mature state. In contrast, patent production, following a bi-logistic model, is in a saturation stage for the second S-curve. Maturity analyses, employing S-curve, bi-logistic and multi-logistic models, were performed on nanocomposites and thin films based on Nd-Fe-B, SmCo5 and Mn-Al-C alloys, respectively. We found that the investigation in Nd-Fe-B-based alloys is close to enter to a scientific saturation stage, while an average growth stage is observed for the SmCo5 and Mn-Al-C-based alloys. This suggests that research on alternative magnets, capable of fulfilling technological applications where a Nd-Fe-B magnets are commonly used, is a topic of significant interest.
ABSTRACT
The rare-earth-free MnAlC alloy is currently considered a very promising candidate for permanent magnet applications due to its high anisotropy field and relatively high saturation magnetization and Curie temperature, besides being a low-cost material. In this work, we presented a simple fabrication route that allows for obtaining a magnetically enhanced bulk τ-MnAlC magnet. In the fabrication process, an electric arc-melting method was carried out to melt ingots of MnAlC alloys. A two-step solution treatment at 1200 °C and 1100 °C allowed us to synthesize a pure room-temperature ε-MnAlC ingot that completely transformed into τ-MnAlC alloy, free of secondary phases, after an annealing treatment at 550 °C for 30 min. The Rietveld refinements and magnetization measurements demonstrated that the quenched process produces a phase-segregated ε-MnAlC alloy that is formed by two types of ε-phases due to local fluctuation of the Mn. Room-temperature hysteresis loops showed that our improved τ-MnAlC alloy exhibited a remanent magnetization of 42 Am2/kg, a coercive field of 0.2 T and a maximum energy product, (BH)max, of 6.07 kJ/m3, which is higher than those reported in previous works using a similar preparation route. Experimental evidence demonstrated that the synthesis of a pure room-temperature ε-MnAlC played an important role in the suppression of undesirable phases that deteriorate the permanent magnet properties of the τ-MnAlC. Finally, magnetic images recorded by Lorentz microscopy allowed us to observe the microstructure and magnetic domain walls of the optimized τ-MnAlC. The presence of magnetic contrasts in all the observed grains allowed us to confirm the high-quality ferromagnetic behavior of the system.
Subject(s)
Magnets , Metals, Rare Earth , Magnets/chemistry , Alloys/chemistry , Temperature , MagneticsABSTRACT
High-purity TiO2 and CuO powders were synthesized by the Pechini method, an inexpensive and easy-to-implement procedure to synthetize metal oxides. The variables of synthesis were the ethylene glycol:citric acid molar ratio and the pH. High reproducibility of the anatase and tenorite phase was obtained for all synthesis routes. The degree of purity of the powders was confirmed by XRD, FTIR, UV-Vis absorption and XPS spectra. SEM and TEM images revealed the powders are composed of micrometer grains that can have a spherical shape (only in the TiO2) or formed by a non-compacted nanocrystalline conglomerate. FTIR spectra only displayed vibrational modes associating TiO2 and CuO with nanoparticle behavior. UV-Vis absorption spectra revealed the values of maximum absorbance percentage of both systems are reached in the ultraviolet region, with percentages above 83% throughout the entire visible light spectrum for the CuO system, a relevant result for solar cell applications. Finally, XPS experiments allow the observation of the valence bands and the calculation of the energy bands of all oxides.
ABSTRACT
The magnetic configurations of cylindrical Co-rich CoNi nanowires have been quantitatively analyzed at the nanoscale by electron holography and correlated to local structural and chemical properties. The nanowires display grains of both face-centered cubic (fcc) and hexagonal close packed (hcp) crystal structures, with grain boundaries parallel to the nanowire axis direction. Electron holography evidences the existence of a complex exotic magnetic configuration characterized by two distinctly different types of magnetic configurations within a single nanowire: an array of periodical vortices separating small transverse domains in hcp-rich regions with perpendicular easy axis orientation and a mostly axial configuration parallel to the nanowire axis in regions with fcc grains. These vastly different domains are found to be caused by local variations in the chemical composition modifying the crystalline orientation and/or structure, which give rise to change in magnetic anisotropies. Micromagnetic simulations, including the structural properties that have been experimentally determined, allow for a deeper understanding of the complex magnetic states observed by electron holography.
ABSTRACT
La metformina (biguanida), grupo de medicamentos que proceden de la guanidina, se ha utilizado desde época medieval para tratamiento de la diabetes. Esta revisión bibliográfica narrativa tiene el propósito de contribuir a mejorar su uso clínico. Se realizó búsqueda de artículos originales, revisiones sistemáticas y artículos de revisión en internet, período 2012-2018, o anterior si fuera relevante. La metformina actúa como un hipoglucemiante, reduce la producción hepática de glucosa inhibiendo la gluconeogénesis y la glucogenólisis, aumenta captación de glucosa a nivel muscular y disminuye absorción de glucosa a nivel gastrointestinal. Una vez intracelular, aumenta la glucólisis anaerobia, uno de sus principales efectos adversos. La metformina es un fármaco que genera incremento de sensibilidad a insulina, mayor control de la glucemia, mejoría del perfil lipídico y de la función vascular, es de bajo costo y es en la actualidad la primera opción en el tratamiento de la diabetes mellitus tipo 2...(AU)
Subject(s)
Humans , Biguanides/pharmacokinetics , Diabetes Mellitus/diagnosis , Metformin/therapeutic use , Hypoglycemic Agents/therapeutic useABSTRACT
Magnetic nanostructures, as part of hybrid CMOS technology, have the potential to overcome silicon's scaling limit. However, a major problem is how to characterize their magnetization without disturbing it. Magnetic force microscopy (MFM) offers a convenient way of studying magnetization, but spatial resolution and sensitivity are usually boosted at the cost of increasing probe-sample interaction. By using a single magnetic domain wall (DW), confined in a V-shape nanostructure fabricated at the probe apex, it is demonstrated here that the spatial resolution and the magnetic sensitivity can be decoupled and both enhanced. Indeed, owing to the nanostructure's strong shape anisotropy, DW-probes have 2 high and 2 low magnetic moment states with opposite polarities, characterised by a geometrically constrained pinned DW, and curled magnetization, respectively. Electron holography studies, supported by numerical simulations, and in situ MFM show that the DW-probe state can be controlled, and thus used as a switchable tool with a low/high stray field intensity.
ABSTRACT
We present a comprehensive method for visualisation and quantification of the magnetic stray field of magnetic force microscopy (MFM) probes, applied to the particular case of custom-made multi-layered probes with controllable high/low magnetic moment states. The probes consist of two decoupled magnetic layers separated by a non-magnetic interlayer, which results in four stable magnetic states: ±ferromagnetic (FM) and ±antiferromagnetic (A-FM). Direct visualisation of the stray field surrounding the probe apex using electron holography convincingly demonstrates a striking difference in the spatial distribution and strength of the magnetic flux in FM and A-FM states. In situ MFM studies of reference samples are used to determine the probe switching fields and spatial resolution. Furthermore, quantitative values of the probe magnetic moments are obtained by determining their real space tip transfer function (RSTTF). We also map the local Hall voltage in graphene Hall nanosensors induced by the probes in different states. The measured transport properties of nanosensors and RSTTF outcomes are introduced as an input in a numerical model of Hall devices to verify the probe magnetic moments. The modelling results fully match the experimental measurements, outlining an all-inclusive method for the calibration of complex magnetic probes with a controllable low/high magnetic moment.
ABSTRACT
The comprehension of the magnetic configuration in FeCoCu nanowires with a diameter-modulated cylindrical geometry will allow controlling the domain wall motion in this low-dimensional system under the application of magnetic fields and/or the injection of current pulses. Here we perform a quantitative magnetic characterization of isolated diameter-modulated FeCoCu nanowires by combining nanoscale magnetic characterization techniques such as electron holography, magnetic force microscopy, and micromagnetic simulations. Local reconstructions of the magnetic distribution show the diameter-modulated geometry of the wires induces the formation of vortex-like structures and magnetic charges in the regions where the diameter is varied. Vortex-like structures modify the axial alignment of the magnetization in large-diameter segments. Moreover, the magnetic charges control the demagnetizing field distribution, promoting a flux-closure stray field configuration around large-diameter segments and keeping the demagnetizing field parallel to the NW's magnetization around small diameter segments. The detailed description of the remanent state in diameter-modulated cylindrical FeCoCu nanowires allows us to provide a clear explanation of the origin of bright and dark contrast observed in magnetic force microscopy images, which have the same feature of magnetic domain walls. This work establishes the primary knowledge required for future magnetization reversal studies with the aim of searching efficient modulated geometries that allow an optimum and controlled domain wall propagation.
ABSTRACT
We have successfully grown ultrasmall cobalt nanostructures (lateral size below 30 nm) by optimization of the growth conditions using focused electron-beam-induced deposition techniques. This direct-write nanolithography technique is thus shown to produce unprecedented resolution in the growth of magnetic nanostructures. The challenging magnetic characterization of such small structures is here carried out by means of electron holography techniques. Apart from growing ultranarrow nanowires, very small Hall sensors have been created and their large response has been unveiled.
