Application of liquid chromatography-ion trap mass spectrometry to the characterization of the 16-membered ring macrolide josamycin propionate.

Coupled liquid chromatography and ion trap mass spectrometry (LC/MS) was used for the characterization of the semi-synthetic 16-membered ring macrolide josamycin propionate. On-line identification of impurities in this antibiotic complex was performed with an ion trap mass spectrometer without recourse to time-consuming isolation and purification procedures. Ion trap mass spectrometry is ideally suited to identification of impurities because it provides MSn capability, enabling multiple stages of mass spectrometry to obtain the maximum amount of structural information for a given molecule. The ion trap was used with an electrospray ionization source operated in the positive ion mode or with an atmospheric pressure chemical ionization source operated in the negative ion mode. The identity of the unknown compounds was deduced using the MS/MS and MSn collision-induced dissociation spectra of reference substances or structural analogs as interpretative templates, combined with knowledge about the nature of functional group fragmentation behavior. Given the importance attached to the identification of impurities of unknown identity in pharmaceutical substances, this study is useful for companies producing josamycin propionate. The knowledge of the fragmentation behavior is also of importance in further research on other 16-membered macrolides.

Investigating the potential of erythromycin and derivatives as chiral selector in capillary electrophoresis.

Macrocyclic antibiotics are present in an increasing number of chiral separation applications. In this study, erythromycin and some derivatives, belonging to the group of macrolide antibiotics, were investigated for their potential as chiral selector. Erythromycin A itself and five related substances namely erythromycin A N-oxide, anhydroerythromycin A, anhydroerythromycin A N-oxide, erythralosamine and erythralosamine N-oxide were included. Twenty-one chiral compounds with a wide difference in physico-chemical properties were used to test the chiral activity of the erythromycins. The chiral compounds were analysed using capillary zone electrophoresis with the erythromycins dissolved in the running buffer at different concentrations ranging from 0.1 to 10mM, with three different BGEs: sodium phosphate pHs 3.0 and 7.0 and sodium borate pH 9.2. The erythromycins showed more interactions with the acidic compounds (as observed with leucovorin, dopa, carbidopa, ketoprofen, indoprofen and warfarin) than with the neutral or weakly basic ones, especially in acidic medium. Unfortunately, no chiral separations were obtained for any of the 21 racemic mixtures. The complexation constants were calculated for the compounds showing interaction, based on the variation of electrophoretic mobility of the compounds in the presence of different concentrations of erythromycins. Finally, the size of erythromycin A was calculated using computational modelling. It was shown that the aglycone ring is only half as big as the beta-cyclodextrin cavity, giving a possible explanation for the negative response of erythromycin in this study.

Characterisation of reversed-phase liquid chromatographic columns by chromatographic tests. Rational column classification by a minimal number of column test parameters.

The European Pharmacopoeia (Ph. Eur.) and other official compendia give only a general description of the stationary phase in the description of a liquid chromatographic method. Therefore the selection of a column giving suitable selectivity presents difficulties. Earlier, a test procedure was proposed that allows to measure 36 chromatographic parameters which have been described for characterising stationary phases. This procedure was carried out on 69 reversed-phase liquid chromatography (RP-LC) columns. This paper focuses on the classification of RP-LC stationary phases based on chromatographic parameters. A chemometric study was conducted using 24 parameters that could be measured in a repeatable and reproducible way. Principal component analysis was used to classify the columns and to estimate the minimal number of parameters necessary for a rational classification. It is shown that after reducing the number of parameters from 24 to four or three, similar classifications were obtained. The column classifications were compared to the European Pharmacopoeia stationary phase description and to the column properties obtained from the manufacturers.

Liquid chromatographic method for analysis of saponins in Maesa balansae extract active against leishmaniasis.

A liquid chromatographic method was developed for the separation of six related triterpenoid saponins in Maesa balansae extracts with different purity, active against leishmaniasis. As stationary phase a Hypersil BDS C18 column (3 microm), 100 x 4.6 mm was used. The mobile phase was a mixture of methanol, acetonitrile, 5% (m/v) ammonium acetate, pH 6.5 and water. A linear gradient was developed for the analysis of crude extracts. An isocratic method was developed to analyze purified samples that mainly contained saponins 3 and 4, the most active saponins. The isocratic LC method was optimized and the robustness was evaluated with an experimental design. The method showed good selectivity, repeatability, linearity and sensitivity.

Assay and purity control of tetracycline, chlortetracycline and oxytetracycline in animal feeds and premixes by TLC densitometry with fluorescence detection.

Methods using TLC densitometry with fluorescence detection are described for the assay and purity control of tetracycline (TC), chlortetracycline (CTC), and oxytetracycline (OTC) in animal feeds and premixes. With a silica gel layer previously sprayed with 10% (m/v) sodium EDTA solution adjusted to pH 8.0 or 9.0, all the major impurities were separated from the main components and from each other. The mobile phase consisted of dichloromethane, methanol, and water. After development, the plate was dipped in a 30% (v/v) solution of liquid paraffin in hexane. Quantitation was realized by fluorescence densitometry at 400 nm. The limit of quantitation (LOQ) for tetracycline impurities is 0.8 microg/g, corresponding to 0.2% of the label claimed tetracycline (400 microg/g). The LOQ for impurities of tetracycline and chlortetracycline in premixes is 0.2% of the label-claimed TC (40 mg/g) and CTC (200 or 400 mg/g). The LOQ for impurities of oxytetracycline in a premix is 0.1% of the label claimed OTC (100 mg/g).

Development and validation of an improved method for the analysis of vancomycin by liquid chromatography selectivity of reversed-phase columns towards vancomycin components.

The current method prescribed in official monographs for the purity control of vancomycin is inappropriate in that several components are not separated from each other and other components are coeluted with the main component vancomycin B. The method uses an ODS column at pH 3.2. In this study, several changes were introduced in order to improve the separation. The optimization of the separation method at low pH indicated that pH 1.7 was optimum and that the use of dioxane as organic modifier drastically improved the separation. These conditions were used to test a set of more than 40 reversed-phase columns for their selectivity towards vancomycin components. The selection of the most suitable columns was performed by means of principal component analysis. Most of these columns did not allow the separation of didechlorovancomycin from monodechlorovancomycin 1. It was found that neutral to slightly alkaline mobile phases allowed better separation. Further optimization of the separation method and a robustness study were performed by means of experimental design. This optimization indicated that pH 7.7 was optimum and gradient elution was also used to effect complete analysis. The final method uses a Kromasil column and the mobile phase comprises dioxane, water and ammonium formate solution pH 7.7. The separation of monodechlorovancomycin 2 and of some unknown impurities from the main component vancomycin B is described for the first time. The method shows good repeatability, linearity and sensitivity.

Sequencing of bacitracin A and related minor components by liquid chromatography/electrospray ionization ion trap tandem mass spectrometry.

A selective reversed-phase liquid chromatography/mass spectrometry (LC/MS(n)) method is described for the characterization of related compounds in commercial bacitracin samples. Mass spectral data for these polypeptide antibiotics were acquired on a LCQ ion trap mass spectrometer equipped with an electrospray ionization probe operated in the positive and negative ion mode. The LCQ ion trap is ideally suited for the sequencing of those linear side-chain cyclized peptides because it provides on-line LC/MS(n) capability. Using this method bacitracin A, 1-epibacitracin A, bacitracins B(1), B(2), B(3) and bacitracin F were sequenced and previous sequencing was confirmed. Bacitracins C(1), C(2), C(3), D, H(2) and H(3) were resolved chromatographically and their ring portion was sequenced for the first time. Four components not described in the literature (1-epibacitracin B(1), 1-epibacitracin B(2), 1-epibacitracin C(1) and H(4)) were sequenced completely for the first time. The main advantage of this hyphenated LC/MS(n) technique is the characterization of the related substances without time-consuming isolation and purification procedures.

Determination of kanamycin by electrophoretically mediated microanalysis with in-capillary derivatization and UV detection.

An electrophoretically mediated microanalysis (EMMA) approach, used to perform on-line chemistry between two small molecules, has been characterized and optimized. The plug-plug type EMMA method involved electrophoretic mixing and subsequent reaction of nanoliter plugs of kanamycin-containing samples and 1,2-phthalic dicarboxaldehyde and mercaptoacetic acid within the confines of the capillary column, which acts as a microreactor. Analyses were performed by pressure-injecting a plug of kanamycin sandwiched in two reagent plugs. A potential of 375 Vcm(-1) was then applied to electrophoretically mix the two reactants, and an incubation time of up to 5 min allowed the reaction to proceed prior to the application of a separation potential of 588 Vcm(-1). UV detection was at 335 nm. The background electrolyte was 30 mM sodium tetraborate at pH 10.0, containing 16% of methanol. The method was validated in terms of linearity, limits of quantitation and detection, and precision. The method allows determination of kanamycin in bulk samples as a fully automated procedure.

Liquid chromatography-ion trap tandem mass spectrometry for the characterization of polypeptide antibiotics of the colistin series in commercial samples.

A selective reversed-phase liquid chromatography-tandem mass spectrometry method is described for the characterization of related substances in the colistin complex. Mass spectral data were acquired on an LCQ ion trap mass spectrometer equipped with an electrospray ionization probe operated in the positive ion mode. The main advantage of this technique is the characterization of novel related substances without time-consuming isolation and purification procedures. Using this method seven new related substances were partially identified in colistin bulk sample and tablets. Four components were assigned as isomers of the main components of colistin.

Determination of capsaicinoids in topical cream by liquid-liquid extraction and liquid chromatography.

A reversed-phase liquid chromatography (LC) method has been developed, optimised and validated for the separation and quantitation of capsaicin (CP) and dihydrocapsaicin (DHCP) in a topical cream formulation. Sample preparation involves liquid-liquid extraction prior to LC analysis. The method uses a Hypersil C(18) BDS, 5 micrometer, 250x4.6 mm I.D. column maintained at 35 degrees C. The mobile phase comprises methanol, water, acetonitrile (ACN) and acetic acid (47:42:10:1, v/v/v/v) at a flow rate of 1.0 ml/min. Robustness was evaluated by performing a central composite face-centred design (CCF) experiment. The method shows good selectivity, linearity, sensitivity and repeatability. The conditions allow the separation and quantitation of CP and DHCP without interference from the other substances contained in the cream.

Characterisation of reversed-phase liquid chromatographic columns by chromatographic tests. Evaluation of 36 test parameters: repeatability, reproducibility and correlation.

The European Pharmacopoeia (Ph. Eur.) or other official compendia give only a general description of the stationary phase in the description of a liquid chromatographic method. Therefore the selection of a column giving suitable selectivity presents difficulties. Earlier, a test procedure was proposed that allows measurement of a number of parameters which are reported to be representative for stationary phase characteristics. This paper describes how the test procedure was applied on 69 RP-LC C18 columns. Chromatographic parameters obtained as test results were evaluated, and their repeatability, reproducibility and correlation were examined.

Simultaneous determination of dopa and carbidopa enantiomers by capillary zone electrophoresis.

Dopa and carbidopa, components of the dual therapy for Parkinson's disease treatment, are both provided as single enantiomers, since their D-forms are inactive. To ensure the efficiency and safety of the therapy, these D-enantiomers, therefore, should be considered as impurities. In this paper, the enantioseparation power of different types of cyclodextrins, both neutral and charged ones, on dopa and carbidopa enantiomers was tested. Three methods of simultaneous separation of dopa and carbidopa enantiomers were developed, using highly sulfated beta-cyclodextrin and sulfated beta-cyclodextrin as chiral selector, in normal and reversed polarity mode. Two methods among these three were found sensitive enough for the quantitation of 0.1% D-enantiomers in L-forms (impurity level). After the optimization study, the best method was selected, using 16 mM sulfated beta-cyclodextrin in 15 mM sodium phosphate buffer pH 2.45, an uncoated fused-silica capillary (50 num inner diameter, 30 cm total length), and an applied voltage of -12 kV. This method is robust and efficient, with very high resolution for all peaks within a short analysis time of 10 min. Quantitatively, the method offers a limit of detection (LOD) of 0.2 nug/mL and a limit of quantitation (LOQ) of 0.5 nug/mL for both D-dopa and D-carbidopa, which is equivalent to 0.02% and 0.05% against the respective L-enantiomers. A linear relationship was found between the concentration of the analyte and the corresponding peak area in a range of 0.5-2.0 nug/mL.

Development and validation of capillary electrophoresis method for tobramycin with precapillary derivatization and UV detection.

One of the major drawbacks in the analysis of aminoglycoside antibiotics is their lack of UV chromophore and/or fluorophore. Tobramycin, a representative member of this group, was examined in this study. To overcome the detection hurdle, a precapillary derivatization followed by capillary electrophoresis analysis with direct UV detection was investigated. A central composite design was applied to optimize the method and three parameters were selected in this study: buffer pH, temperature and % acetonitrile (ACN). Selectivity between tobramycin main component and its adjacent peaks as well as the peak efficiency and symmetry factors were established as responses. For each response, a model was obtained by a second-order mathematical expression. Successful results were obtained with a simple background electrolyte (BGE) containing 30 mM sodium tetraborate, pH 10.2, and ACN (75:25 v/v). Under these conditions, baseline separation of tobramycin from its adjacent kanamycin B and an unknown peak was achieved. A temperature of 20 degrees C and applied voltage of 28.0 kV were used. The method showed good validation data in terms of precision, limits of quantitation and detection, specificity and linearity and was found to be suitable for analysis of tobramycin bulk pharmaceutical samples.

Minimal number of chromatographic test parameters for the characterisation of reversed-phase liquid chromatographic stationary phases.

This paper focuses on the classification or differentiation of RP-HPLC columns based on measured chromatographic properties. A chemometric study has been conducted on a published data set consisting of 85 RP-HPLC columns and on a data set consisting of 47 self-tested columns. Principal component analysis enables determination of the number of parameters necessary for a rational differentiation. The results show that reducing the number of parameters for such differentiation still allows classification of the columns just as a higher number did. It is shown that three test parameters produce a classification similar to that obtained with five parameters.

The antiplasmodial activity of isolates from Ajuga remota.

Ajuga remota is the most frequently used medicinal herb for malaria treatment in Kenya. Its two known isolates ajugarin-1 (1) and ergosterol-5,8-endoperoxide (3) and a new isolate 8-O-acetylharpagide (2) were evaluated for their in vitro antiplasmodial activity. Ajugarin-1 was moderately active, with an IC(50) of 23.0 +/- 3.0 microM, as compared to chloroquine (IC(50) = 0.041 +/- 0.003 microM) against the chloroquine-sensitive (FCA 20/GHA) strain of Plasmodium falciparum. Ergosterol-5,8-endoperoxide was about 3x as potent (IC(50) = 8.2 +/- 1.1 microM), while 8-O-acetylharpagide, whose structure was established by spectroscopic evidence, was inactive. Both ajugarin-1 and ergosterol-5,8-endoperoxide did not exhibit cytotoxicity against A431 (skin carcinoma) cell line, but 8-O-acetylharpagide was significantly cytotoxic. This iridoid glucoside, which has been formerly isolated from Ajuga decumbens, was identified in A. remota for the first time.

Mass spectrometric fragmentation of cyclic peptides belonging to the polymyxin and colistin antibiotics studied by ion trap and quadrupole/orthogonal-acceleration time-of-flight technology.

Electrospray ionization linked to quadrupole/orthogonal-acceleration time-of-flight (Q/oaTOF) and ion trap equipment was used to study the fragmentation behavior of the linear side-chain cyclized peptides of the polymyxin B and E antibiotics. This study exemplifies both the benefits and the drawbacks of mass spectrometric techniques for the determination of the sequence of such complex linear side-chain cyclized peptides. Q/oaTOF accurate mass measurements did not help sufficiently to assign the product ions observed in the product ion spectra. An ion trap mass spectrometer providing MS(n) capability was used to eliminate ambiguities encountered with a single MS/MS approach. The complex fragmentation behavior of these compounds of well-established structure is described which could be useful for structural characterization of unknown substances related to polymyxin B and E in the future.

Characterization of polypeptide antibiotics of the polymyxin series by liquid chromatography electrospray ionization ion trap tandem mass spectrometry.

A selective reversed phase liquid chromatography/mass spectrometry (LC/MSn) method is described for the identification of related compounds in commercial polymyxin B samples. Mass spectral data for these polypeptide antibiotics were acquired on a LCQ ion trap mass spectrometer equipped with an electrospray ionization probe operated in the positive ion mode. The LCQ ion trap is ideally suited for the identification of the related substances because it provides on-line LC/MSn capability. The main advantage of this hyphenated LC/MSn technique is the characterization of novel related substances without time-consuming isolation and purifications procedures. Using this method six novel related substances were partially identified in a polymyxin B bulk sample.