Preparation and Characterization of Superabsorbent Polymers Based on Starch Aldehydes and Carboxymethyl Cellulose.

Superabsorbent polymers (SAPs) are crosslinked hydrophilic polymers that are capable of absorbing large amounts of water. Commercial SAPs are mostly produced with acrylic acid that cannot be easily biodegraded. Therefore, in this study, polysaccharide-based SAPs using carboxymethyl cellulose as a major component were prepared. Starch aldehydes and citric acid were selected due to their environment-friendly, non-toxic, and biodegradable properties compared to conventional crosslinking agents. Starch aldehydes were prepared by periodate oxidation, which forms aldehyde groups by taking the places of C⁻OH groups at C-2 and C-3. Furthermore, starch aldehydes were analyzed through the change in FT-IR spectra, the aldehyde quantitation, and the morphology in FE-SEM images. In the crosslinking of polysaccharide-based SAPs, the acetal bridges from starch aldehydes led to a large amount of water entering the network structure of the SAPs. However, the ester bridges from citric acid interfered with the water penetration. In addition, the swelling behavior of the SAPs was analyzed by the Fickian diffusion model and the Schott's pseudo second order kinetics model. The relationship between swelling behavior and morphology of the SAPs was analyzed by FE-SEM images. In conclusion, polysaccharide-based SAPs were well prepared and the highest equilibrium swelling ratio was 87.0 g/g.

Effect of Low-Temperature Pyrolysis on the Properties of Jute Fiber-Reinforced Acetylated Softwood Kraft Lignin-Based Thermoplastic Polyurethane.

Short jute fiber-reinforced acetylated lignin-based thermoplastic polyurethane (JF reinforced ASKLTPU) was prepared and characterized as a short-fiber-reinforced elastomer with carbon-neutrality and biodegradability. The acetylated softwood kraft lignin-based thermoplastic polyurethane (ASKLTPU) was prepared with polyethylene glycol (PEG) as a soft segment. Short jute fiber was modified using low-temperature pyrolysis up to the temperatures of 200, 250, and 300 °C in order to remove non-cellulosic compounds of jute fibers for enhancing interfacial bonding and reducing hydrophilicity with the ASKLTPU matrix. JF-reinforced ASKLTPUs with fiber content from 5 to 30 wt % were prepared using a melt mixing method followed by hot-press molding at 160 °C. The JF-reinforced ASKLTPUs were characterized for their mechanical properties, dynamic mechanical properties, thermal transition behavior, thermal stability, water absorption, and fungal degradability. The increased interfacial bonding between JF and ASKLTPU using low-temperature pyrolysis was observed using scanning electron microscopy (SEM) and also proved via interfacial shear strength measured using a single-fiber pull-out test. The mechanical properties, thermal properties, and water absorption aspects of JF-reinforced ASKLTPU were affected by increased interfacial bonding and reduced hydrophilicity from low-temperature pyrolysis. In the case of the degradation test, the PEG component of ASKLPTU matrix highly affects degradation and deterioration.

Covalent Functionalization of Multi-Walled Carbon Nanotubes Surface via Chemical Treatment.

Due to the strong hydrophobic and van der Waals interactions between individual carbon nanotubes (CNTs), these particles easily aggregate with themselves. When CNTs were introduced into a polymer matrix as a filler, aggregations formed that can adversely affect the mechanical and thermal properties of polymer/CNTs composites. To prevent aggregation, covalent functionalizations via chemical treatments using H2SO4/HNO3, H2O2/H2O and a silane coupling agent(STX)-glycidoxypropyltrimethoxysilane, GPTMS) on the CNTs were chosen in this study. Moreover, the effect of the functional groups on the solubility of CNTs in tetrahydrofuran (THF) was investigated. The surface-modified multi-walled carbon nanotubes (MWCNTs) were also characterized and compared with pristine MWCNTs using several techniques. Morphology changes in surfacemodified MWCNTs were observed by Raman spectroscopy and Field-Emission Scanning Electron Microscopy (FE-SEM) images. Qualitative analyses of the functional groups on the surface-modified MWCNTs were performed by Fourier Transform Infrared Spectroscopy (FT-IR). Additionally, quantitative analyses were performed by X-Ray Photoelectron Spectroscopy (XPS), Energy Dispersive Spectroscopy (EDS), a titration method and Thermogravimetric analysis (TGA).

Effects of Covalent Functionalization of MWCNTs on the Thermal Properties and Non-Isothermal Crystallization Behaviors of PPS Composites.

In this study, a PPS/MWCNTs composite was prepared with poly(phenylene sulfide) (PPS), as well as pristine and covalent functionalized multi-walled carbon nanotubes (MWCNTs) via melt-blending techniques. Moreover, the dispersion of the MWCNTs on the PPS matrix was improved by covalent functionalization as can be seen from a Field-Emission Scanning Electron Microscope (FE-SEM) images. The thermal properties of the PPS/MWCNTs composites were characterized using a thermal conductivity analyzer, and a differential scanning calorimeter (DSC). To analyze the crystallization behavior of polymers under conditions similar with those in industry, the non-isothermal crystallization behaviors of the PPS/MWCNTs composites were confirmed using various kinetic equations, such as the modified Avrami equation and Avrami-Ozawa combined equation. The crystallization rate of PPS/1 wt % pristine MWCNTs composite (PPSP1) was faster because of the intrinsic nucleation effect of the MWCNTs. However, the crystallization rates of the composites containing covalently-functionalized MWCNTs were slower than PPSP1 because of the destruction of the MWCNTs graphitic structure via covalent functionalization. Furthermore, the activation energies calculated by Kissinger's method were consistently decreased by covalent functionalization.

Changes of Lignin Molecular Structures in a Modification of Kraft Lignin Using Acid Catalyst.

The purpose of this study is to modify lignin for better blending with general purpose synthetic polymers. The possible advantages by using this modification would be cost reduction, better physical properties, and biodegradability. In this study, butyrolactone-modified lignin (BLL) and tetrahydrofuran-modified lignin (THFL) were used for aliphatic chain modification of lignin using an acid-catalyzed esterification method in order to mimic the relation of lignin-carbohydrate-complex (LCC) and cellulose. The results of several analyses indicated that lignin was well modified. It was confirmed that the lignin was modified as expected and the reaction sites of the modification, as well as the reaction behaviors, were varied by the reagent types. The result of X-ray diffraction analysis (XRD) analysis indicated that modified lignin/polymer blends increased the crystallinity due to their good compatibility. It can be confirmed that the type of alkyl chain and the miscibility gap between the alkyl chain-matrix affected the mechanical properties enormously in the fungi-degradable environment. From this study, a new method of lignin modification is proposed, and it is found that modified lignin retains the property of the substituted aliphatic chain well. This method could be a proper lignin modification method.